Merge http://linux.bkbits.net/linux-2.5

into neo.rr.com:/home/ambx1/linux/bk/linus-2.5

CREDITS

@@ -1864,6 +1864,13 @@ S: Am Muehlenweg 38
 S: D53424 Remagen
 S: Germany
 
+N: Colin Leroy
+E: colin@colino.net
+W: http://www.geekounet.org/
+D: PowerMac adt7467 fan driver
+S: Toulouse
+S: France
+
 N: Achim Leubner
 E: achim_leubner@adaptec.com
 D: GDT Disk Array Controller/Storage RAID controller driver

Documentation/x86_64/boot-options.txt

@@ -136,7 +136,7 @@ PCI
 
 IOMMU
 
-  iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]]
+  iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,soft]
    size  set size of iommu (in bytes)
    noagp don't initialize the AGP driver and use full aperture.
    off   don't use the IOMMU
@@ -144,5 +144,9 @@ IOMMU
    memaper[=order] allocate an own aperture over RAM with size 32MB^order.
    noforce don't force IOMMU usage. Default.
    force  Force IOMMU
+   soft   Use software bounce buffering for non 32bit IO. Default on Intel
+          machines. 
 
+  swiotlb=pages
 
+  Prereserve that many 4K pages for the software IO bounce buffering.

arch/alpha/Kconfig

@@ -188,7 +188,7 @@ config ALPHA_MIATA
 	help
 	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
 	  or 600au).  There is an Installation HOWTO for this hardware at
-	  <http://members.brabant.chello.nl/~s.vandereijk/miata.html>.
+	  <http://eijk.homelinux.org/~stefan/miata.html>.
 
 config ALPHA_MIKASA
 	bool "Mikasa"
@@ -486,19 +486,8 @@ config SMP
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  Note that if you say Y here and choose architecture "586" or
-	  "Pentium" under "Processor family", the kernel will not work on 486
-	  architectures. Similarly, multiprocessor kernels for the "PPro"
-	  architecture may not work on all Pentium based boards.
-
-	  People using multiprocessor machines who say Y here should also say
-	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
-	  Management" code will be disabled if you say Y here.
-
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  See also the <file:Documentation/smp.tex>, and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 

arch/alpha/kernel/alpha_ksyms.c

@@ -35,6 +35,9 @@
 #include <asm/cacheflush.h>
 #include <asm/vga.h>
 
+#define __KERNEL_SYSCALLS__
+#include <asm/unistd.h>
+
 extern struct hwrpb_struct *hwrpb;
 extern void dump_thread(struct pt_regs *, struct user *);
 extern spinlock_t rtc_lock;

arch/alpha/kernel/time.c

@@ -24,6 +24,8 @@
  * 2000-08-13	Jan-Benedict Glaw <jbglaw@lug-owl.de>
  * 	Fixed time_init to be aware of epoches != 1900. This prevents
  * 	booting up in 2048 for me;) Code is stolen from rtc.c.
+ * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
+ *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
  */
 #include <linux/config.h>
 #include <linux/errno.h>
@@ -306,7 +308,7 @@ void __init
 time_init(void)
 {
 	unsigned int year, mon, day, hour, min, sec, cc1, cc2, epoch;
-	unsigned long cycle_freq, one_percent;
+	unsigned long cycle_freq, tolerance;
 	long diff;
 
 	/* Calibrate CPU clock -- attempt #1.  */
@@ -324,13 +326,13 @@ time_init(void)
 
 	cycle_freq = hwrpb->cycle_freq;
 	if (est_cycle_freq) {
-		/* If the given value is within 1% of what we calculated, 
+		/* If the given value is within 250 PPM of what we calculated,
 		   accept it.  Otherwise, use what we found.  */
-		one_percent = cycle_freq / 100;
+		tolerance = cycle_freq / 4000;
 		diff = cycle_freq - est_cycle_freq;
 		if (diff < 0)
 			diff = -diff;
-		if ((unsigned long)diff > one_percent) {
+		if ((unsigned long)diff > tolerance) {
 			cycle_freq = est_cycle_freq;
 			printk("HWRPB cycle frequency bogus.  "
 			       "Estimated %lu Hz\n", cycle_freq);

arch/alpha/kernel/traps.c

@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
 #include <linux/module.h>
+#include <linux/init.h>
 
 #include <asm/gentrap.h>
 #include <asm/uaccess.h>
@@ -25,35 +26,37 @@
 
 #include "proto.h"
 
-/* data/code implementing a work-around for some SRMs which
-   mishandle opDEC faults
-*/
-static int opDEC_testing = 0;
-static int opDEC_fix = 0;
-static int opDEC_checked = 0;
-static unsigned long opDEC_test_pc = 0;
+/* Work-around for some SRMs which mishandle opDEC faults.  */
 
-static void
+static int opDEC_fix;
+
+static void __init
 opDEC_check(void)
 {
-	unsigned long test_pc;
-
-	if (opDEC_checked) return;
-
-	lock_kernel();
-	opDEC_testing = 1;
-
-	__asm__ __volatile__(
-		"       br      %0,1f\n"
-		"1:     addq    %0,8,%0\n"
-		"       stq     %0,%1\n"
+	__asm__ __volatile__ (
+	/* Load the address of... */
+	"	br	$16, 1f\n"
+	/* A stub instruction fault handler.  Just add 4 to the
+	   pc and continue.  */
+	"	ldq	$16, 8($sp)\n"
+	"	addq	$16, 4, $16\n"
+	"	stq	$16, 8($sp)\n"
+	"	call_pal %[rti]\n"
+	/* Install the instruction fault handler.  */
+	"1:	lda	$17, 3\n"
+	"	call_pal %[wrent]\n"
+	/* With that in place, the fault from the round-to-minf fp
+	   insn will arrive either at the "lda 4" insn (bad) or one
+	   past that (good).  This places the correct fixup in %0.  */
+	"	lda %[fix], 0\n"
 	"	cvttq/svm $f31,$f31\n"
-		: "=&r"(test_pc), "=m"(opDEC_test_pc)
-		: );
+	"	lda %[fix], 4"
+	: [fix] "=r" (opDEC_fix)
+	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
+	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
 
-	opDEC_testing = 0;
-	opDEC_checked = 1;
-	unlock_kernel();
+	if (opDEC_fix)
+		printk("opDEC fixup enabled.\n");
 }
 
 void
@@ -244,7 +247,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 	siginfo_t info;
 	int signo, code;
 
-	if (!opDEC_testing || type != 4) {
+	if (regs->ps == 0) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -359,14 +362,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			   fault during the boot sequence and testing if
 			   we get the correct PC.  If not, we set a flag
 			   to correct it every time through.  */
-			if (opDEC_testing) {
-				if (regs->pc == opDEC_test_pc) {
-					opDEC_fix = 4;
-					regs->pc += 4;
-					printk("opDEC fixup enabled.\n");
-				}
-				return;
-			}
 			regs->pc += opDEC_fix; 
 			
 			/* EV4 does not implement anything except normal
@@ -1083,22 +1078,22 @@ do_entUnaUser(void * va, unsigned long opcode,
 	return;
 }
 
-void
+void __init
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */
 	register unsigned long gptr __asm__("$29");
 	wrkgp(gptr);
 
+	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
+	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
+	if (implver() == IMPLVER_EV4)
+		opDEC_check();
+
 	wrent(entArith, 1);
 	wrent(entMM, 2);
 	wrent(entIF, 3);
 	wrent(entUna, 4);
 	wrent(entSys, 5);
 	wrent(entDbg, 6);
-
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
 }

arch/x86_64/kernel/acpi/boot.c

@@ -366,6 +366,17 @@ __setup("acpi_pic_sci=", acpi_pic_sci_setup);
 
 #endif /* CONFIG_ACPI_BUS */
 
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (use_pci_vector() && !platform_legacy_irq(gsi))
+ 		*irq = IO_APIC_VECTOR(gsi);
+	else
+#endif
+		*irq = gsi;
+	return 0;
+}
+
 static unsigned long __init
 acpi_scan_rsdp (
 	unsigned long		start,

arch/x86_64/kernel/entry.S

@@ -402,9 +402,9 @@ ENTRY(stub_rt_sigreturn)
 /* 0(%rsp): interrupt number */ 
 	.macro interrupt func
 	CFI_STARTPROC	simple
-	CFI_DEF_CFA	rsp,(SS-ORIG_RAX)
-	CFI_OFFSET	rsp,(RSP-SS)
-	CFI_OFFSET	rip,(RIP-SS)
+	CFI_DEF_CFA	rsp,(SS-RDI)
+	CFI_REL_OFFSET	rsp,(RSP-ORIG_RAX)
+	CFI_REL_OFFSET	rip,(RIP-ORIG_RAX)
 	cld
 #ifdef CONFIG_DEBUG_INFO
 	SAVE_ALL	
@@ -805,6 +805,8 @@ ENTRY(debug)
 	paranoidentry do_debug
 	/* switch back to process stack to restore the state ptrace touched */
 	movq %rax,%rsp	
+	testl $3,CS(%rsp)
+	jnz   paranoid_userspace	
 	jmp paranoid_exit
 	CFI_ENDPROC
 
@@ -816,8 +818,6 @@ ENTRY(nmi)
 	paranoidentry do_nmi
 	/* ebx:	no swapgs flag */
 paranoid_exit:
-	testl $3,CS(%rsp)
-	jnz   paranoid_userspace	
 	testl %ebx,%ebx				/* swapgs needed? */
 	jnz paranoid_restore
 paranoid_swapgs:	
@@ -870,6 +870,8 @@ ENTRY(double_fault)
 	CFI_STARTPROC
 	paranoidentry do_double_fault
 	movq %rax,%rsp
+	testl $3,CS(%rsp)
+	jnz paranoid_userspace		
 	jmp paranoid_exit
 	CFI_ENDPROC
 
@@ -884,6 +886,8 @@ ENTRY(stack_segment)
 	CFI_STARTPROC
 	paranoidentry do_stack_segment
 	movq %rax,%rsp
+	testl $3,CS(%rsp)
+	jnz paranoid_userspace
 	jmp paranoid_exit
 	CFI_ENDPROC
 

arch/x86_64/kernel/mce.c

@@ -22,12 +22,13 @@
 #include <asm/uaccess.h>
 
 #define MISC_MCELOG_MINOR 227
+#define NR_BANKS 5
 
 static int mce_disabled __initdata;
 /* 0: always panic, 1: panic if deadlock possible, 2: try to avoid panic */ 
 static int tolerant = 2;
 static int banks;
-static unsigned long disabled_banks;
+static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
 
 /*
  * Lockless MCE logging infrastructure.
@@ -144,7 +145,7 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 	mb();
 
 	for (i = 0; i < banks; i++) {
-		if (test_bit(i, &disabled_banks))
+		if (!bank[i])
 			continue;
 
 		rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
@@ -179,7 +180,7 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 		   confused it's normally not necessary to panic, unless you are 
 		   paranoid (tolerant == 0) */ 
 		if (!user_space && (panic_on_oops || tolerant < 2))
-			mce_panic("Uncorrected machine check in kernel", &m, mcestart);
+			mce_panic("Uncorrected machine check", &m, mcestart);
 
 		/* do_exit takes an awful lot of locks and has as slight risk 
 		   of deadlocking. If you don't want that don't set tolerant >= 2 */
@@ -238,17 +239,31 @@ static void mce_init(void *dummy)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 
 	banks = cap & 0xff;
+	if (banks > NR_BANKS) { 
+		printk(KERN_INFO "MCE: warning: using only %d banks\n", banks);
+		banks = NR_BANKS; 
+	}
 
 	mce_clear_all(); 
 	for (i = 0; i < banks; i++) {
-		u64 val = test_bit(i, &disabled_banks) ? 0 : ~0UL;
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, val);
+		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
 		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
 	}	
 
 	set_in_cr4(X86_CR4_MCE);
 }
 
+/* Add per CPU specific workarounds here */
+static void __init mce_cpu_quirks(struct cpuinfo_x86 *c) 
+{ 
+	/* This should be disabled by the BIOS, but isn't always */
+	if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) {
+		/* disable GART TBL walk error reporting, which trips off 
+		   incorrectly with the IOMMU & 3ware & Cerberus. */
+		clear_bit(10, &bank[4]);
+	}
+}			
+
 /* 
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off. 
@@ -257,6 +272,8 @@ void __init mcheck_init(struct cpuinfo_x86 *c)
 {
 	static unsigned long mce_cpus __initdata = 0;
 
+	mce_cpu_quirks(c); 
+
 	if (test_and_set_bit(smp_processor_id(), &mce_cpus) || !mce_available(c))
 		return;
 
@@ -343,23 +360,9 @@ static int mce_ioctl(struct inode *i, struct file *f,unsigned int cmd, unsigned
 	} 
 }
 
-#if 0 /* for testing */
-static ssize_t mce_write(struct file *f, const char __user *buf, size_t sz, loff_t *off)
-{
-	struct mce m;
-	if (sz != sizeof(struct mce))
-		return -EINVAL;
-	copy_from_user(&m, buf, sizeof(struct mce));
-	m.finished = 0;
-	mce_log(&m);
-	return sizeof(struct mce);
-}
-#endif
-
 static struct file_operations mce_chrdev_ops = {
 	.read = mce_read,
 	.ioctl = mce_ioctl,
-	//.write = mce_write
 };
 
 static struct miscdevice mce_log_device = {
@@ -425,23 +428,27 @@ static struct sys_device device_mce = {
 };
 
 /* Why are there no generic functions for this? */
-#define ACCESSOR(name, start) \
+#define ACCESSOR(name, var, start) \
 	static ssize_t show_ ## name(struct sys_device *s, char *buf) { 	   	   \
-		return sprintf(buf, "%lu\n", (unsigned long)name);		   \
+		return sprintf(buf, "%lu\n", (unsigned long)var);		   \
 	} 									   \
 	static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
 		char *end; 							   \
 		unsigned long new = simple_strtoul(buf, &end, 0); 		   \
 		if (end == buf) return -EINVAL;					   \
-		name = new;							   \
+		var = new;							   \
 		start; 								   \
 		return end-buf;		     					   \
 	}									   \
 	static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
 
-ACCESSOR(disabled_banks,mce_restart())
-ACCESSOR(tolerant,)
-ACCESSOR(check_interval,mce_restart())
+ACCESSOR(bank0ctl,bank[0],mce_restart())
+ACCESSOR(bank1ctl,bank[1],mce_restart())
+ACCESSOR(bank2ctl,bank[2],mce_restart())
+ACCESSOR(bank3ctl,bank[3],mce_restart())
+ACCESSOR(bank4ctl,bank[4],mce_restart())
+ACCESSOR(tolerant,tolerant,)
+ACCESSOR(check_interval,check_interval,mce_restart())
 
 static __init int mce_init_device(void)
 {
@@ -453,7 +460,11 @@ static __init int mce_init_device(void)
 		err = sysdev_register(&device_mce);
 	if (!err) { 
 		/* could create per CPU objects, but is not worth it. */
-		sysdev_create_file(&device_mce, &attr_disabled_banks); 
+		sysdev_create_file(&device_mce, &attr_bank0ctl); 
+		sysdev_create_file(&device_mce, &attr_bank1ctl); 
+		sysdev_create_file(&device_mce, &attr_bank2ctl); 
+		sysdev_create_file(&device_mce, &attr_bank3ctl); 
+		sysdev_create_file(&device_mce, &attr_bank4ctl); 
 		sysdev_create_file(&device_mce, &attr_tolerant); 
 		sysdev_create_file(&device_mce, &attr_check_interval);
 	} 

arch/x86_64/kernel/mpparse.c

@@ -9,7 +9,7 @@
  *		Erich Boleyn	:	MP v1.4 and additional changes.
  *		Alan Cox	:	Added EBDA scanning
  *		Ingo Molnar	:	various cleanups and rewrites
- *	Maciej W. Rozycki	:	Bits for default MP configurations
+ *		Maciej W. Rozycki:	Bits for default MP configurations
  *		Paul Diefenbaugh:	Added full ACPI support
  */
 
@@ -690,25 +690,25 @@ void __init mp_register_lapic (
 
 struct mp_ioapic_routing {
 	int			apic_id;
-	int			irq_start;
-	int			irq_end;
+	int			gsi_start;
+	int			gsi_end;
 	u32			pin_programmed[4];
 } mp_ioapic_routing[MAX_IO_APICS];
 
 
 static int __init mp_find_ioapic (
-	int			irq)
+	int			gsi)
 {
 	int			i = 0;
 
-	/* Find the IOAPIC that manages this IRQ. */
+	/* Find the IOAPIC that manages this GSI. */
 	for (i = 0; i < nr_ioapics; i++) {
-		if ((irq >= mp_ioapic_routing[i].irq_start)
-			&& (irq <= mp_ioapic_routing[i].irq_end))
+		if ((gsi >= mp_ioapic_routing[i].gsi_start)
+			&& (gsi <= mp_ioapic_routing[i].gsi_end))
 			return i;
 	}
 
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for IRQ %d\n", irq);
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
 
 	return -1;
 }
@@ -717,7 +717,7 @@ static int __init mp_find_ioapic (
 void __init mp_register_ioapic (
 	u8			id, 
 	u32			address,
-	u32			irq_base)
+	u32			gsi_base)
 {
 	int			idx = 0;
 
@@ -743,19 +743,19 @@ void __init mp_register_ioapic (
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 	
 	/* 
-	 * Build basic IRQ lookup table to facilitate irq->io_apic lookups
+	 * Build basic IRQ lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI IRQs).
 	 */
 	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].irq_start = irq_base;
-	mp_ioapic_routing[idx].irq_end = irq_base + 
+	mp_ioapic_routing[idx].gsi_start = gsi_base;
+	mp_ioapic_routing[idx].gsi_end = gsi_base + 
 		io_apic_get_redir_entries(idx);
 
 	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-		"IRQ %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
+		"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
 		mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
-		mp_ioapic_routing[idx].irq_start,
-		mp_ioapic_routing[idx].irq_end);
+		mp_ioapic_routing[idx].gsi_start,
+		mp_ioapic_routing[idx].gsi_end);
 
 	return;
 }
@@ -765,7 +765,7 @@ void __init mp_override_legacy_irq (
 	u8			bus_irq,
 	u8			polarity, 
 	u8			trigger, 
-	u32			global_irq)
+	u32			gsi)
 {
 	struct mpc_config_intsrc intsrc;
 	int			i = 0;
@@ -774,12 +774,12 @@ void __init mp_override_legacy_irq (
 	int			pin = -1;
 
 	/* 
-	 * Convert 'global_irq' to 'ioapic.pin'.
+	 * Convert 'gsi' to 'ioapic.pin'.
 	 */
-	ioapic = mp_find_ioapic(global_irq);
+	ioapic = mp_find_ioapic(gsi);
 	if (ioapic < 0)
 		return;
-	pin = global_irq - mp_ioapic_routing[ioapic].irq_start;
+	pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
 
 	/*
 	 * TBD: This check is for faulty timer entries, where the override
@@ -804,7 +804,7 @@ void __init mp_override_legacy_irq (
 
 	/* 
 	 * If an existing [IOAPIC.PIN -> IRQ] routing entry exists we override it.
-	 * Otherwise create a new entry (e.g. global_irq == 2).
+	 * Otherwise create a new entry (e.g. gsi == 2).
 	 */
 	for (i = 0; i < mp_irq_entries; i++) {
 		if ((mp_irqs[i].mpc_srcbus == intsrc.mpc_srcbus) 
@@ -878,7 +878,7 @@ void __init mp_config_acpi_legacy_irqs (void)
 
 extern FADT_DESCRIPTOR acpi_fadt;
 
-void __init mp_config_ioapic_for_sci(int irq)
+void __init mp_config_ioapic_for_sci(u32 gsi)
 {
 #ifdef CONFIG_ACPI_INTERPRETER
 	int ioapic;
@@ -926,11 +926,11 @@ void __init mp_config_ioapic_for_sci(int irq)
 	 */
 	flags = entry->flags;
 	acpi_fadt.sci_int = entry->global_irq;
-	irq = entry->global_irq;
+	gsi = entry->global_irq;
 
-	ioapic = mp_find_ioapic(irq);
+	ioapic = mp_find_ioapic(gsi);
 
-	ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;
+	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
 
 	/*
 	 * MPS INTI flags:
@@ -938,7 +938,7 @@ void __init mp_config_ioapic_for_sci(int irq)
 	 *  polarity: 0=default, 1=high, 3=low
 	 * Per ACPI spec, default for SCI means level/low.
 	 */
-	io_apic_set_pci_routing(ioapic, ioapic_pin, irq, 
+	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, 
 		(flags.trigger == 1 ? 0 : 1), (flags.polarity == 1 ? 0 : 1));
 #endif
 }
@@ -951,7 +951,7 @@ void __init mp_parse_prt (void)
 	struct acpi_prt_entry	*entry = NULL;
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
-	int			irq = 0;
+	int			gsi = 0;
 	int			idx, bit = 0;
 	int			edge_level = 0;
 	int			active_high_low = 0;
@@ -963,30 +963,30 @@ void __init mp_parse_prt (void)
 	list_for_each(node, &acpi_prt.entries) {
 		entry = list_entry(node, struct acpi_prt_entry, node);
 
-		/* Need to get irq for dynamic entry */
+		/* Need to get gsi for dynamic entry */
 		if (entry->link.handle) {
-			irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
-			if (!irq)
+			gsi = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
+			if (!gsi)
 				continue;
 		} else {
-			/* Hardwired IRQ. Assume PCI standard settings */
-			irq = entry->link.index;
+			/* Hardwired GSI. Assume PCI standard settings */
+			gsi = entry->link.index;
 			edge_level = 1;
 			active_high_low = 1;
 		}
 
 		/* Don't set up the ACPI SCI because it's already set up */
-		if (acpi_fadt.sci_int == irq)
+		if (acpi_fadt.sci_int == gsi)
 			continue;
 
-		ioapic = mp_find_ioapic(irq);
+		ioapic = mp_find_ioapic(gsi);
 		if (ioapic < 0)
 			continue;
-		ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;
+		ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
 
 		/* 
 		 * Avoid pin reprogramming.  PRTs typically include entries  
-		 * with redundant pin->irq mappings (but unique PCI devices);
+		 * with redundant pin->gsi mappings (but unique PCI devices);
 		 * we only only program the IOAPIC on the first.
 		 */
 		bit = ioapic_pin % 32;
@@ -1000,20 +1000,16 @@ void __init mp_parse_prt (void)
 		if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
 			Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
 				mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- 			if (use_pci_vector() && !platform_legacy_irq(irq))
- 				irq = IO_APIC_VECTOR(irq);
-			entry->irq = irq;
+			acpi_gsi_to_irq(gsi, &entry->irq);
 			continue;
 		}
 
 		mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-		if (!io_apic_set_pci_routing(ioapic, ioapic_pin, irq, edge_level, active_high_low)) {
- 			if (use_pci_vector() && !platform_legacy_irq(irq))
- 				irq = IO_APIC_VECTOR(irq);
-			entry->irq = irq;
+		if (!io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, edge_level, active_high_low)) {
+			acpi_gsi_to_irq(gsi, &entry->irq);
  		}
-		printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> %d-%d"
-			" -> IRQ %d\n", entry->id.segment, entry->id.bus, 
+		printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> %d-%d -> IRQ %d\n",
+			entry->id.segment, entry->id.bus,
 			entry->id.device, ('A' + entry->pin), 
 			mp_ioapic_routing[ioapic].apic_id, ioapic_pin,
 			entry->irq);

arch/x86_64/kernel/pci-gart.c

@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/topology.h>
+#include <linux/interrupt.h>
 #include <asm/atomic.h>
 #include <asm/io.h>
 #include <asm/mtrr.h>
@@ -31,6 +32,12 @@
 #include <asm/kdebug.h>
 #include <asm/proto.h>
 
+#ifdef CONFIG_PREEMPT
+#define preempt_atomic() in_atomic()
+#else
+#define preempt_atomic() 1
+#endif
+
 dma_addr_t bad_dma_address;
 
 unsigned long iommu_bus_base;	/* GART remapping area (physical) */
@@ -96,6 +103,8 @@ AGPEXTERN __u32 *agp_gatt_table;
 
 static unsigned long next_bit;  /* protected by iommu_bitmap_lock */
 static int need_flush; 		/* global flush state. set for each gart wrap */
+static dma_addr_t pci_map_area(struct pci_dev *dev, unsigned long phys_mem, 
+			       size_t size, int dir);
 
 static unsigned long alloc_iommu(int size) 
 { 	
@@ -169,43 +178,44 @@ static void flush_gart(struct pci_dev *dev)
 
 /* 
  * Allocate memory for a consistent mapping.
- * All mappings are consistent here, so this is just a wrapper around
- * pci_map_single.
  */
 void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
 			   dma_addr_t *dma_handle)
 {
 	void *memory;
-	int gfp = GFP_ATOMIC;
-	unsigned long dma_mask;
+	int gfp = preempt_atomic() ? GFP_ATOMIC : GFP_KERNEL; 
+	unsigned long dma_mask = 0;
+	u64 bus;
 
-	if (hwdev == NULL) {
-		gfp |= GFP_DMA; 
-		dma_mask = 0xffffffff; 
-	} else {
+	if (hwdev) 
 		dma_mask = hwdev->dev.coherent_dma_mask;
-	}
-
 	if (dma_mask == 0) 
 		dma_mask = 0xffffffff; 
-	if (dma_mask < 0xffffffff || no_iommu)
-		gfp |= GFP_DMA;
 
 	/* Kludge to make it bug-to-bug compatible with i386. i386
 	   uses the normal dma_mask for alloc_consistent. */
 	dma_mask &= hwdev->dma_mask;
 
+ again:
 	memory = (void *)__get_free_pages(gfp, get_order(size));
-	if (memory == NULL) {
+	if (memory == NULL)
 		return NULL; 
-	} else {
+
+	{
 		int high, mmu;
-	        high = ((unsigned long)virt_to_bus(memory) + size) >= dma_mask;
+		bus = virt_to_bus(memory);
+	        high = (bus + size) >= dma_mask;
 		mmu = high;
 		if (force_iommu && !(gfp & GFP_DMA)) 
 			mmu = 1;
-		if (no_iommu) { 
-			if (high) goto error;
+		if (no_iommu || dma_mask < 0xffffffffUL) { 
+			if (high) {
+				if (!(gfp & GFP_DMA)) { 
+					gfp |= GFP_DMA; 
+					goto again;
+				}
+				goto free;
+			}
 			mmu = 0; 
 		} 	
 		memset(memory, 0, size); 
@@ -215,15 +225,16 @@ void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
 		}
 	} 
 
-	*dma_handle = pci_map_single(hwdev, memory, size, 0);
+	*dma_handle = pci_map_area(hwdev, bus, size, PCI_DMA_BIDIRECTIONAL);
 	if (*dma_handle == bad_dma_address)
 		goto error; 
-
+	flush_gart(hwdev);	
 	return memory; 
 	
 error:
 	if (panic_on_overflow)
-		panic("pci_map_single: overflow %lu bytes\n", size); 
+		panic("pci_alloc_consistent: overflow %lu bytes\n", size); 
+free:
 	free_pages((unsigned long)memory, get_order(size)); 
 	return NULL; 
 }
@@ -608,6 +619,7 @@ EXPORT_SYMBOL(pci_unmap_single);
 EXPORT_SYMBOL(pci_dma_supported);
 EXPORT_SYMBOL(no_iommu);
 EXPORT_SYMBOL(force_iommu); 
+EXPORT_SYMBOL(bad_dma_address);
 
 static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size)
 { 
@@ -733,7 +745,7 @@ static int __init pci_iommu_init(void)
 
 	if (swiotlb) { 
 		no_iommu = 1;
-		printk(KERN_INFO "PCI-DMA: Using SWIOTLB :-(\n"); 
+		printk(KERN_INFO "PCI-DMA: Using software bounce buffering for  IO (SWIOTLB)\n"); 
 		return -1; 
 	} 
 	
@@ -837,6 +849,7 @@ fs_initcall(pci_iommu_init);
    forcesac For SAC mode for masks <40bits  (experimental)
    fullflush Flush IOMMU on each allocation (default) 
    nofullflush Don't use IOMMU fullflush
+   soft	 Use software bounce buffering (default for Intel machines)
 */
 __init int iommu_setup(char *opt) 
 { 
@@ -876,6 +889,8 @@ __init int iommu_setup(char *opt)
 		    iommu_fullflush = 1;
 	    if (!memcmp(p, "nofullflush", 11))
 		    iommu_fullflush = 0;
+	    if (!memcmp(p, "soft", 4))
+		    swiotlb = 1;
 #ifdef CONFIG_IOMMU_LEAK
 	    if (!memcmp(p,"leak", 4)) { 
 		    leak_trace = 1;

arch/x86_64/kernel/process.c

@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/ptrace.h>
+#include <linux/version.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -205,7 +206,8 @@ void __show_regs(struct pt_regs * regs)
 
 	printk("\n");
 	print_modules();
-	printk("Pid: %d, comm: %.20s %s\n", current->pid, current->comm, print_tainted());
+	printk("Pid: %d, comm: %.20s %s %s\n", 
+	       current->pid, current->comm, print_tainted(), UTS_RELEASE);
 	printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip);
 	printk_address(regs->rip); 
 	printk("\nRSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss, regs->rsp, regs->eflags);

arch/x86_64/kernel/setup.c

@@ -232,7 +232,7 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 		if (!memcmp(from, "noapic", 6)) 
 			skip_ioapic_setup = 1;
 
-		if (!memcmp(from, "apic", 6)) { 
+		if (!memcmp(from, "apic", 4)) { 
 			skip_ioapic_setup = 0;
 			ioapic_force = 1;
 		}
@@ -453,9 +453,7 @@ void __init setup_arch(char **cmdline_p)
 	paging_init();
 
 #ifndef CONFIG_SMP
-	/* Temporary hack: disable the IO-APIC for UP Nvidia and 
-	   This is until we sort out the ACPI problems. */
-	if (!acpi_disabled) 
+	/* Temporary hack: disable the IO-APIC for UP Nvidia and VIA. */
 		check_ioapic();
 #endif
 #ifdef CONFIG_ACPI_BOOT

arch/x86_64/mm/init.c

@@ -405,10 +405,10 @@ void __init mem_init(void)
 	int tmp;
 
 #ifdef CONFIG_SWIOTLB
-       if (!iommu_aperture && end_pfn >= 0xffffffff>>PAGE_SHIFT) { 
-	       swiotlb_init();
+	if (!iommu_aperture && end_pfn >= 0xffffffff>>PAGE_SHIFT)
 	       swiotlb = 1;
-       }
+	if (swiotlb)
+		swiotlb_init();	
 #endif
 
 	/* How many end-of-memory variables you have, grandma! */

arch/x86_64/pci/mmconfig.c

@@ -88,7 +88,7 @@ static int __init pci_mmcfg_init(void)
 		return 0;
 	}	
 
-	printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n", pci_mmcfg_base_addr);
+	printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_base_addr);
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
 

drivers/char/rtc.c

@@ -110,6 +110,8 @@ static int rtc_has_irq = 1;
 #define hpet_rtc_timer_init() 			do { } while (0)
 #define hpet_rtc_dropped_irq() 			0
 static inline irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) {return 0;}
+#else
+extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 #endif
 
 /*

drivers/char/vt.c

@@ -2481,19 +2481,18 @@ static int con_open(struct tty_struct *tty, struct file * filp)
 	return 0;
 }
 
-static void con_close(struct tty_struct *tty, struct file * filp)
+static void con_close(struct tty_struct *tty, struct file *filp)
 {
+	acquire_console_sem();
+	if (tty && tty->count == 1) {
 		struct vt_struct *vt;
 
-	if (!tty || tty->count != 1)
-		return;
-
 		vcs_remove_devfs(tty);
-	acquire_console_sem();
-	vt = (struct vt_struct*)tty->driver_data;
+		vt = tty->driver_data;
 		if (vt)
 			vc_cons[vt->vc_num].d->vc_tty = NULL;
 		tty->driver_data = 0;
+	}
 	release_console_sem();
 }
 

drivers/macintosh/Kconfig

@@ -175,8 +175,8 @@ config THERM_WINDTUNNEL
 	  This driver provides some thermostat and fan control for the desktop
 	  G4 "Windtunnel"
 
-config THERM_ADT7467
-	tristate "Support for thermal mgmnt on laptops with ADT 7467 chipset"
+config THERM_ADT746X
+	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the

drivers/macintosh/Makefile

@@ -25,4 +25,4 @@ obj-$(CONFIG_ADB_MACIO)		+= macio-adb.o
 
 obj-$(CONFIG_THERM_PM72)	+= therm_pm72.o
 obj-$(CONFIG_THERM_WINDTUNNEL)	+= therm_windtunnel.o
-obj-$(CONFIG_THERM_ADT7467)	+= therm_adt7467.o
+obj-$(CONFIG_THERM_ADT746X)	+= therm_adt746x.o

drivers/macintosh/therm_adt7467.c → drivers/macintosh/therm_adt746x.c

@@ -49,7 +49,7 @@ static int limit_adjust = 0;
 static int fan_speed = -1;
 
 MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
-MODULE_DESCRIPTION("Driver for ADT7467 thermostat in iBook G4");
+MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and Powerbook G4 Alu");
 MODULE_LICENSE("GPL");
 
 MODULE_PARM(limit_adjust,"i");
@@ -161,7 +161,7 @@ detach_thermostat(struct i2c_adapter *adapter)
 }
 
 static struct i2c_driver thermostat_driver = {  
-	.name		="Apple Thermostat ADT7467",
+	.name		="Apple Thermostat ADT746x",
 	.id		=0xDEAD7467,
 	.flags		=I2C_DF_NOTIFY,
 	.attach_adapter	=&attach_thermostat,
@@ -494,9 +494,6 @@ thermostat_init(void)
 	struct device_node* np;
 	u32 *prop;
 	
-	/* Currently, we only deal with the iBook G4, we will support
-	 * all "2003" powerbooks later on
-	 */
 	np = of_find_node_by_name(NULL, "fan");
 	if (!np)
 		return -ENODEV;

drivers/scsi/scsi_transport_spi.c

@@ -33,7 +33,7 @@
 #include <scsi/scsi_transport.h>
 #include <scsi/scsi_transport_spi.h>
 
-#define SPI_PRINTK(x, l, f, a...)	printk(l "scsi(%d:%d:%d:%d): " f, (x)->host->host_no, (x)->channel, (x)->id, (x)->lun, ##a)
+#define SPI_PRINTK(x, l, f, a...)	printk(l "scsi(%d:%d:%d:%d): " f, (x)->host->host_no, (x)->channel, (x)->id, (x)->lun , ##a)
 
 static void transport_class_release(struct class_device *class_dev);
 

include/asm-x86_64/acpi.h

@@ -109,6 +109,8 @@ extern int acpi_strict;
 /* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
 #define FIX_ACPI_PAGES 4
 
+extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
+
 #else	/* !CONFIG_ACPI_BOOT */
 #define acpi_lapic 0
 #define acpi_ioapic 0

include/asm-x86_64/calling.h

@@ -35,28 +35,28 @@
 	subq  $9*8+\addskip,%rsp
 	CFI_ADJUST_CFA_OFFSET	9*8+\addskip
 	movq  %rdi,8*8(%rsp) 
-	CFI_OFFSET	rdi,8*8-(9*8+\addskip)
+	CFI_REL_OFFSET	rdi,8*8
 	movq  %rsi,7*8(%rsp) 
-	CFI_OFFSET	rsi,7*8-(9*8+\addskip)
+	CFI_REL_OFFSET	rsi,7*8
 	movq  %rdx,6*8(%rsp)
-	CFI_OFFSET	rdx,6*8-(9*8+\addskip)
+	CFI_REL_OFFSET	rdx,6*8
 	.if \norcx
 	.else
 	movq  %rcx,5*8(%rsp)
-	CFI_OFFSET	rcx,5*8-(9*8+\addskip)
+	CFI_REL_OFFSET	rcx,5*8
 	.endif
 	movq  %rax,4*8(%rsp) 
-	CFI_OFFSET	rax,4*8-(9*8+\addskip)
+	CFI_REL_OFFSET	rax,4*8
 	.if \nor891011
 	.else
 	movq  %r8,3*8(%rsp) 
-	CFI_OFFSET	r8,3*8-(9*8+\addskip)
+	CFI_REL_OFFSET	r8,3*8
 	movq  %r9,2*8(%rsp) 
-	CFI_OFFSET	r9,2*8-(9*8+\addskip)
+	CFI_REL_OFFSET	r9,2*8
 	movq  %r10,1*8(%rsp) 
-	CFI_OFFSET	r10,1*8-(9*8+\addskip)
+	CFI_REL_OFFSET	r10,1*8
 	movq  %r11,(%rsp) 
-	CFI_OFFSET	r11,-(9*8+\addskip)
+	CFI_OFFSET	r11
 	.endif
 	.endm
 
@@ -109,17 +109,17 @@
 	subq $REST_SKIP,%rsp
 	CFI_ADJUST_CFA_OFFSET	REST_SKIP
 	movq %rbx,5*8(%rsp) 
-	CFI_OFFSET	rbx,5*8-(REST_SKIP)
+	CFI_REL_OFFSET	rbx,5*8
 	movq %rbp,4*8(%rsp) 
-	CFI_OFFSET	rbp,4*8-(REST_SKIP)
+	CFI_REL_OFFSET	rbp,4*8
 	movq %r12,3*8(%rsp) 
-	CFI_OFFSET	r12,3*8-(REST_SKIP)
+	CFI_REL_OFFSET	r12,3*8
 	movq %r13,2*8(%rsp) 
-	CFI_OFFSET	r13,2*8-(REST_SKIP)
+	CFI_REL_OFFSET	r13,2*8
 	movq %r14,1*8(%rsp) 
-	CFI_OFFSET	r14,1*8-(REST_SKIP)
+	CFI_REL_OFFSET	r14,1*8
 	movq %r15,(%rsp) 
-	CFI_OFFSET	r15,0*8-(REST_SKIP)
+	CFI_REL_OFFSET	r15,0*8
 	.endm		
 
 	.macro RESTORE_REST

include/asm-x86_64/hardirq.h

@@ -78,6 +78,7 @@
 
 
 #ifdef CONFIG_PREEMPT
+# include <linux/smp_lock.h>
 # define in_atomic()   ((preempt_count() & ~PREEMPT_ACTIVE) != kernel_locked())
 # define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1)
 #else

include/asm-x86_64/hpet.h

 #ifndef _ASM_X8664_HPET_H
 #define _ASM_X8664_HPET_H 1
 
-#include <linux/interrupt.h>
-
 /*
  * Documentation on HPET can be found at:
  *      http://www.intel.com/ial/home/sp/pcmmspec.htm
@@ -53,7 +51,6 @@ extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned ch
 extern int hpet_set_periodic_freq(unsigned long freq);
 extern int hpet_rtc_dropped_irq(void);
 extern int hpet_rtc_timer_init(void);
-extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 #endif /* CONFIG_HPET_EMULATE_RTC */
 
 #endif

include/asm-x86_64/mpspec.h

@@ -186,14 +186,14 @@ extern void mp_register_lapic (u8 id, u8 enabled);
 extern void mp_register_lapic_address (u64 address);
 
 #ifdef CONFIG_X86_IO_APIC
-extern void mp_register_ioapic (u8 id, u32 address, u32 irq_base);
-extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 global_irq);
+extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
+extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
 extern void mp_config_acpi_legacy_irqs (void);
 extern void mp_parse_prt (void);
 #endif /*CONFIG_X86_IO_APIC*/
 #endif
 
-extern void mp_config_ioapic_for_sci(int irq);
+extern void mp_config_ioapic_for_sci(u32 gsi);
 
 extern int using_apic_timer;