media: atomisp: Drop atomisp-ov5693 sensor driver

After recent improvements to atomisp driver, the atomisp driver
now works fine with the standard ov5693 driver.

Drop the no longer necessary atomisp specific atomisp-ov5693
sensor driver.

Link: https://lore.kernel.org/r/20230813152645.45834-2-hdegoede@redhat.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

drivers/staging/media/atomisp/i2c/Kconfig

@@ -57,18 +57,6 @@ config VIDEO_ATOMISP_GC0310
 	  This is a Video4Linux2 sensor-level driver for the Galaxycore
 	  GC0310 0.3MP sensor.
 
-config VIDEO_ATOMISP_OV5693
-	tristate "Omnivision ov5693 sensor support"
-	depends on ACPI
-	depends on I2C && VIDEO_DEV
-	help
-	  This is a Video4Linux2 sensor-level driver for the Micron
-	  ov5693 5 Mpixel camera.
-
-	  ov5693 is video camera sensor.
-
-	  It currently only works with the atomisp driver.
-
 #
 # Kconfig for flash drivers
 #

drivers/staging/media/atomisp/i2c/Makefile

@@ -3,7 +3,6 @@
 # Makefile for sensor drivers
 #
 
-obj-$(CONFIG_VIDEO_ATOMISP_OV5693)     += ov5693/
 obj-$(CONFIG_VIDEO_ATOMISP_MT9M114)    += atomisp-mt9m114.o
 obj-$(CONFIG_VIDEO_ATOMISP_GC2235)     += atomisp-gc2235.o
 obj-$(CONFIG_VIDEO_ATOMISP_OV2722)     += atomisp-ov2722.o

drivers/staging/media/atomisp/i2c/ov5693/Makefile

-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_VIDEO_ATOMISP_OV5693) += atomisp-ov5693.o

drivers/staging/media/atomisp/i2c/ov5693/ad5823.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Support for AD5823 VCM.
- *
- * Copyright (c) 2013 Intel Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#ifndef __AD5823_H__
-#define __AD5823_H__
-
-#include <linux/types.h>
-
-#define AD5823_VCM_ADDR	0x0c
-
-#define AD5823_REG_RESET		0x01
-#define AD5823_REG_MODE			0x02
-#define AD5823_REG_VCM_MOVE_TIME	0x03
-#define AD5823_REG_VCM_CODE_MSB		0x04
-#define AD5823_REG_VCM_CODE_LSB		0x05
-#define AD5823_REG_VCM_THRESHOLD_MSB	0x06
-#define AD5823_REG_VCM_THRESHOLD_LSB	0x07
-
-#define AD5823_REG_LENGTH		0x1
-
-#define AD5823_RING_CTRL_ENABLE		0x04
-#define AD5823_RING_CTRL_DISABLE	0x00
-
-#define AD5823_RESONANCE_PERIOD		100000
-#define AD5823_RESONANCE_COEF		512
-#define AD5823_HIGH_FREQ_RANGE		0x80
-
-#define VCM_CODE_MSB_MASK		0xfc
-#define AD5823_INIT_FOCUS_POS           350
-
-enum ad5823_tok_type {
-	AD5823_8BIT  = 0x1,
-	AD5823_16BIT = 0x2,
-};
-
-enum ad5823_vcm_mode {
-	AD5823_ARC_RES0 = 0x0,	/* Actuator response control RES1 */
-	AD5823_ARC_RES1 = 0x1,	/* Actuator response control RES0.5 */
-	AD5823_ARC_RES2 = 0x2,	/* Actuator response control RES2 */
-	AD5823_ESRC = 0x3,	/* Enhanced slew rate control */
-	AD5823_DIRECT = 0x4,	/* Direct control */
-};
-
-#define AD5823_INVALID_CONFIG	0xffffffff
-#define AD5823_MAX_FOCUS_POS	1023
-#define DELAY_PER_STEP_NS	1000000
-#define DELAY_MAX_PER_STEP_NS	(1000000 * 1023)
-#endif