ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s5p6440/Makefile

@@ -13,6 +13,7 @@ obj-				:=
 # Core support for S5P6440 system
 
 obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
+obj-$(CONFIG_CPU_S5P6440)	+= setup-i2c0.o
 
 # machine support
 

arch/arm/plat-s5p/setup-i2c0.c → arch/arm/mach-s5p6440/setup-i2c0.c

-/* linux/arch/arm/plat-s5p/setup-i2c0.c
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/

arch/arm/mach-s5p6442/Makefile

@@ -13,6 +13,7 @@ obj-				:=
 # Core support for S5P6442 system
 
 obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_CPU_S5P6442)	+= setup-i2c0.o
 
 # machine support
 

arch/arm/mach-s5p6442/setup-i2c0.c

+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}

arch/arm/mach-s5pv210/Makefile

@@ -13,6 +13,7 @@ obj-				:=
 # Core support for S5PV210 system
 
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 
 # machine support
 

arch/arm/mach-s5pv210/setup-i2c0.c

+/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}

arch/arm/plat-s5p/Makefile

@@ -16,4 +16,3 @@ obj-y				+= dev-uart.o
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
-obj-y				+= setup-i2c0.o