Commit a118df07 authored by Tony Lindgren's avatar Tony Lindgren Committed by Greg Kroah-Hartman

usb: musb: Don't set d+ high before enable for 2430 glue layer

At least 2430 glue layer pulls d+ high on start up even if there are
no gadgets configured. This is bad at least for anything using a separate
battery charger chip as it can confuse the charger detection.

Let's fix the issue by removing the bogus glue layer code tinkering
with the SESSION bit. As pointed out Bin Liu <b-liu@ti.com> and
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, the SESSION
bit just starts host mode if ID pin is grounded, and starts the
srp is ID pin is floating. So without the ID pin changing, it's
unable to force musb mode to anything. And just for starting a
host mode, things work fine without this code.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarBin Liu <b-liu@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 4dc2fe7a
...@@ -122,16 +122,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) ...@@ -122,16 +122,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
musb_readb(musb->mregs, MUSB_DEVCTL)); musb_readb(musb->mregs, MUSB_DEVCTL));
} }
static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
{
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
return 0;
}
static inline void omap2430_low_level_exit(struct musb *musb) static inline void omap2430_low_level_exit(struct musb *musb)
{ {
u32 l; u32 l;
...@@ -472,7 +462,6 @@ static const struct musb_platform_ops omap2430_ops = { ...@@ -472,7 +462,6 @@ static const struct musb_platform_ops omap2430_ops = {
.init = omap2430_musb_init, .init = omap2430_musb_init,
.exit = omap2430_musb_exit, .exit = omap2430_musb_exit,
.set_mode = omap2430_musb_set_mode,
.set_vbus = omap2430_musb_set_vbus, .set_vbus = omap2430_musb_set_vbus,
.enable = omap2430_musb_enable, .enable = omap2430_musb_enable,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment