Commit a131bfc6 authored by Oliver O'Halloran's avatar Oliver O'Halloran Committed by Michael Ellerman

powerpc/eeh: Move PE tree setup into the platform

The EEH core has a concept of a "PE tree" to support PowerNV. The PE tree
follows the PCI bus structures because a reset asserted on an upstream
bridge will be propagated to the downstream bridges. On pseries there's a
1-1 correspondence between what the guest sees are a PHB and a PE so the
"tree" is really just a single node.

Current the EEH core is reponsible for setting up this PE tree which it
does by traversing the pci_dn tree. The structure of the pci_dn tree
matches the bus tree on PowerNV which leads to the PE tree being "correct"
this setup method doesn't make a whole lot of sense and it's actively
confusing for the pseries case where it doesn't really do anything.

We want to remove the dependence on pci_dn anyway so this patch move
choosing where to insert a new PE into the platform code rather than
being part of the generic EEH code. For PowerNV this simplifies the
tree building logic and removes the use of pci_dn. For pseries we
keep the existing logic. I'm not really convinced it does anything
due to the 1-1 PE-to-PHB correspondence so every device under that
PHB should be in the same PE, but I'd rather not remove it entirely
until we've had a chance to look at it more deeply.
Signed-off-by: default avatarOliver O'Halloran <oohall@gmail.com>
Reviewed-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200725081231.39076-14-oohall@gmail.com
parent 31595ae5
......@@ -283,7 +283,7 @@ struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
struct eeh_pe *eeh_pe_next(struct eeh_pe *pe, struct eeh_pe *root);
struct eeh_pe *eeh_pe_get(struct pci_controller *phb,
int pe_no, int config_addr);
int eeh_pe_tree_insert(struct eeh_dev *edev);
int eeh_pe_tree_insert(struct eeh_dev *edev, struct eeh_pe *new_pe_parent);
int eeh_pe_tree_remove(struct eeh_dev *edev);
void eeh_pe_update_time_stamp(struct eeh_pe *pe);
void *eeh_pe_traverse(struct eeh_pe *root,
......
......@@ -318,53 +318,20 @@ struct eeh_pe *eeh_pe_get(struct pci_controller *phb,
return pe;
}
/**
* eeh_pe_get_parent - Retrieve the parent PE
* @edev: EEH device
*
* The whole PEs existing in the system are organized as hierarchy
* tree. The function is used to retrieve the parent PE according
* to the parent EEH device.
*/
static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
{
struct eeh_dev *parent;
struct pci_dn *pdn = eeh_dev_to_pdn(edev);
/*
* It might have the case for the indirect parent
* EEH device already having associated PE, but
* the direct parent EEH device doesn't have yet.
*/
if (edev->physfn)
pdn = pci_get_pdn(edev->physfn);
else
pdn = pdn ? pdn->parent : NULL;
while (pdn) {
/* We're poking out of PCI territory */
parent = pdn_to_eeh_dev(pdn);
if (!parent)
return NULL;
if (parent->pe)
return parent->pe;
pdn = pdn->parent;
}
return NULL;
}
/**
* eeh_pe_tree_insert - Add EEH device to parent PE
* @edev: EEH device
* @new_pe_parent: PE to create additional PEs under
*
* Add EEH device to the parent PE. If the parent PE already
* exists, the PE type will be changed to EEH_PE_BUS. Otherwise,
* we have to create new PE to hold the EEH device and the new
* PE will be linked to its parent PE as well.
* Add EEH device to the PE in edev->pe_config_addr. If a PE already
* exists with that address then @edev is added to that PE. Otherwise
* a new PE is created and inserted into the PE tree as a child of
* @new_pe_parent.
*
* If @new_pe_parent is NULL then the new PE will be inserted under
* directly under the the PHB.
*/
int eeh_pe_tree_insert(struct eeh_dev *edev)
int eeh_pe_tree_insert(struct eeh_dev *edev, struct eeh_pe *new_pe_parent)
{
struct pci_controller *hose = edev->controller;
struct eeh_pe *pe, *parent;
......@@ -398,8 +365,7 @@ int eeh_pe_tree_insert(struct eeh_dev *edev)
parent = parent->parent;
}
eeh_edev_dbg(edev,
"Added to device PE (parent: PE#%x)\n",
eeh_edev_dbg(edev, "Added to existing PE (parent: PE#%x)\n",
pe->parent->addr);
} else {
/* Mark the PE as type of PCI bus */
......@@ -431,10 +397,9 @@ int eeh_pe_tree_insert(struct eeh_dev *edev)
* to PHB directly. Otherwise, we have to associate the
* PE with its parent.
*/
parent = eeh_pe_get_parent(edev);
if (!parent) {
parent = eeh_phb_pe_get(hose);
if (!parent) {
if (!new_pe_parent) {
new_pe_parent = eeh_phb_pe_get(hose);
if (!new_pe_parent) {
pr_err("%s: No PHB PE is found (PHB Domain=%d)\n",
__func__, hose->global_number);
edev->pe = NULL;
......@@ -442,17 +407,19 @@ int eeh_pe_tree_insert(struct eeh_dev *edev)
return -EEXIST;
}
}
pe->parent = parent;
/* link new PE into the tree */
pe->parent = new_pe_parent;
list_add_tail(&pe->child, &new_pe_parent->child_list);
/*
* Put the newly created PE into the child list and
* link the EEH device accordingly.
*/
list_add_tail(&pe->child, &parent->child_list);
list_add_tail(&edev->entry, &pe->edevs);
edev->pe = pe;
eeh_edev_dbg(edev, "Added to device PE (parent: PE#%x)\n",
pe->parent->addr);
eeh_edev_dbg(edev, "Added to new (parent: PE#%x)\n",
new_pe_parent->addr);
return 0;
}
......
......@@ -338,6 +338,28 @@ static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
return 0;
}
static struct eeh_pe *pnv_eeh_get_upstream_pe(struct pci_dev *pdev)
{
struct pci_controller *hose = pdev->bus->sysdata;
struct pnv_phb *phb = hose->private_data;
struct pci_dev *parent = pdev->bus->self;
#ifdef CONFIG_PCI_IOV
/* for VFs we use the PF's PE as the upstream PE */
if (pdev->is_virtfn)
parent = pdev->physfn;
#endif
/* otherwise use the PE of our parent bridge */
if (parent) {
struct pnv_ioda_pe *ioda_pe = pnv_ioda_get_pe(parent);
return eeh_pe_get(phb->hose, ioda_pe->pe_number, 0);
}
return NULL;
}
/**
* pnv_eeh_probe - Do probe on PCI device
* @pdev: pci_dev to probe
......@@ -350,6 +372,7 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
struct pci_controller *hose = pdn->phb;
struct pnv_phb *phb = hose->private_data;
struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
struct eeh_pe *upstream_pe;
uint32_t pcie_flags;
int ret;
int config_addr = (pdn->busno << 8) | (pdn->devfn);
......@@ -398,8 +421,10 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
edev->pe_config_addr = phb->ioda.pe_rmap[config_addr];
upstream_pe = pnv_eeh_get_upstream_pe(pdev);
/* Create PE */
ret = eeh_pe_tree_insert(edev);
ret = eeh_pe_tree_insert(edev, upstream_pe);
if (ret) {
eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret);
return NULL;
......
......@@ -69,11 +69,16 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
pseries_eeh_init_edev(pdn);
#ifdef CONFIG_PCI_IOV
if (pdev->is_virtfn) {
/*
* FIXME: This really should be handled by choosing the right
* parent PE in in pseries_eeh_init_edev().
*/
struct eeh_pe *physfn_pe = pci_dev_to_eeh_dev(pdev->physfn)->pe;
struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
edev->pe_config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
eeh_pe_tree_remove(edev); /* Remove as it is adding to bus pe */
eeh_pe_tree_insert(edev); /* Add as VF PE type */
eeh_pe_tree_insert(edev, physfn_pe); /* Add as VF PE type */
}
#endif
eeh_probe_device(pdev);
......@@ -385,6 +390,43 @@ static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap)
return 0;
}
/**
* pseries_eeh_pe_get_parent - Retrieve the parent PE
* @edev: EEH device
*
* The whole PEs existing in the system are organized as hierarchy
* tree. The function is used to retrieve the parent PE according
* to the parent EEH device.
*/
static struct eeh_pe *pseries_eeh_pe_get_parent(struct eeh_dev *edev)
{
struct eeh_dev *parent;
struct pci_dn *pdn = eeh_dev_to_pdn(edev);
/*
* It might have the case for the indirect parent
* EEH device already having associated PE, but
* the direct parent EEH device doesn't have yet.
*/
if (edev->physfn)
pdn = pci_get_pdn(edev->physfn);
else
pdn = pdn ? pdn->parent : NULL;
while (pdn) {
/* We're poking out of PCI territory */
parent = pdn_to_eeh_dev(pdn);
if (!parent)
return NULL;
if (parent->pe)
return parent->pe;
pdn = pdn->parent;
}
return NULL;
}
/**
* pseries_eeh_init_edev - initialise the eeh_dev and eeh_pe for a pci_dn
*
......@@ -468,6 +510,8 @@ void pseries_eeh_init_edev(struct pci_dn *pdn)
if (ret) {
eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
} else {
struct eeh_pe *parent;
/* Retrieve PE address */
edev->pe_config_addr = pseries_eeh_get_pe_addr(pdn);
pe.addr = edev->pe_config_addr;
......@@ -480,16 +524,19 @@ void pseries_eeh_init_edev(struct pci_dn *pdn)
if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
enable = 1;
if (enable) {
/*
* This device doesn't support EEH, but it may have an
* EEH parent. In this case any error on the device will
* freeze the PE of it's upstream bridge, so added it to
* the upstream PE.
*/
parent = pseries_eeh_pe_get_parent(edev);
if (parent && !enable)
edev->pe_config_addr = parent->addr;
if (enable || parent) {
eeh_add_flag(EEH_ENABLED);
eeh_pe_tree_insert(edev);
} else if (pdn->parent && pdn_to_eeh_dev(pdn->parent) &&
(pdn_to_eeh_dev(pdn->parent))->pe) {
/* This device doesn't support EEH, but it may have an
* EEH parent, in which case we mark it as supported.
*/
edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
eeh_pe_tree_insert(edev);
eeh_pe_tree_insert(edev, parent);
}
eeh_edev_dbg(edev, "EEH is %s on device (code %d)\n",
(enable ? "enabled" : "unsupported"), ret);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment