Commit a190a1ce authored by Ivan T. Ivanov's avatar Ivan T. Ivanov Committed by Kumar Gala

arm64: dts: qcom: Add initial set of PMIC and SoC pins for APQ8016 SBC board

Add initial device configuration nodes for APQ8016 and PM8916 GPIO's.
Signed-off-by: default avatarIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
parent 366655c9
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
&pm8916_gpios {
pinctrl-names = "default";
pinctrl-0 = <&pm8916_gpios_default>;
pm8916_gpios_default: default {
usb_hub_reset_pm {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm {
pins = "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
};
usr_led_3_ctrl {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usr_led_4_ctrl {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
};
#include <dt-bindings/gpio/gpio.h>
&msmgpio {
pinctrl-names = "default";
pinctrl-0 = <&soc_gpios_default>;
soc_gpios_default: default {
usr_led_1_ctrl_default: usr_led_1_ctrl_default {
pins = "gpio21";
function = "gpio";
output-low;
};
usr_led_2_ctrl_default: usr_led_2_ctrl_default {
pins = "gpio120";
function = "gpio";
output-low;
};
};
};
...@@ -13,6 +13,8 @@ ...@@ -13,6 +13,8 @@
#include "msm8916.dtsi" #include "msm8916.dtsi"
#include "pm8916.dtsi" #include "pm8916.dtsi"
#include "apq8016-sbc-soc-pins.dtsi"
#include "apq8016-sbc-pmic-pins.dtsi"
/ { / {
aliases { aliases {
......
...@@ -82,7 +82,7 @@ restart@4ab000 { ...@@ -82,7 +82,7 @@ restart@4ab000 {
reg = <0x4ab000 0x4>; reg = <0x4ab000 0x4>;
}; };
pinctrl@1000000 { msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl"; compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>; reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment