Commit a1c510d0 authored by Ard Biesheuvel's avatar Ard Biesheuvel

ARM: implement support for vmap'ed stacks

Wire up the generic support for managing task stack allocations via vmalloc,
and implement the entry code that detects whether we faulted because of a
stack overrun (or future stack overrun caused by pushing the pt_regs array)

While this adds a fair amount of tricky entry asm code, it should be
noted that it only adds a TST + branch to the svc_entry path. The code
implementing the non-trivial handling of the overflow stack is emitted
out-of-line into the .text section.

Since on ARM, we rely on do_translation_fault() to keep PMD level page
table entries that cover the vmalloc region up to date, we need to
ensure that we don't hit such a stale PMD entry when accessing the
stack. So we do a dummy read from the new stack while still running from
the old one on the context switch path, and bump the vmalloc_seq counter
when PMD level entries in the vmalloc range are modified, so that the MM
switch fetches the latest version of the entries.

Note that we need to increase the per-mode stack by 1 word, to gain some
space to stash a GPR until we know it is safe to touch the stack.
However, due to the cacheline alignment of the struct, this does not
actually increase the memory footprint of the struct stack array at all.
Signed-off-by: default avatarArd Biesheuvel <ardb@kernel.org>
Tested-by: default avatarKeith Packard <keithpac@amazon.com>
Tested-by: default avatarMarc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
parent ae5cc07d
...@@ -127,6 +127,7 @@ config ARM ...@@ -127,6 +127,7 @@ config ARM
select RTC_LIB select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION select SYS_SUPPORTS_APM_EMULATION
select THREAD_INFO_IN_TASK if CURRENT_POINTER_IN_TPIDRURO select THREAD_INFO_IN_TASK if CURRENT_POINTER_IN_TPIDRURO
select HAVE_ARCH_VMAP_STACK if MMU && THREAD_INFO_IN_TASK && (!LD_IS_LLD || LLD_VERSION >= 140000)
select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
# Above selects are sorted alphabetically; please add new ones # Above selects are sorted alphabetically; please add new ones
# according to that. Thanks. # according to that. Thanks.
......
...@@ -149,6 +149,10 @@ extern void copy_page(void *to, const void *from); ...@@ -149,6 +149,10 @@ extern void copy_page(void *to, const void *from);
#include <asm/pgtable-2level-types.h> #include <asm/pgtable-2level-types.h>
#endif #endif
#ifdef CONFIG_VMAP_STACK
#define ARCH_PAGE_TABLE_SYNC_MASK PGTBL_PMD_MODIFIED
#endif
#endif /* CONFIG_MMU */ #endif /* CONFIG_MMU */
typedef struct page *pgtable_t; typedef struct page *pgtable_t;
......
...@@ -25,6 +25,14 @@ ...@@ -25,6 +25,14 @@
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
#define THREAD_START_SP (THREAD_SIZE - 8) #define THREAD_START_SP (THREAD_SIZE - 8)
#ifdef CONFIG_VMAP_STACK
#define THREAD_ALIGN (2 * THREAD_SIZE)
#else
#define THREAD_ALIGN THREAD_SIZE
#endif
#define OVERFLOW_STACK_SIZE SZ_4K
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
struct task_struct; struct task_struct;
......
...@@ -57,6 +57,10 @@ UNWIND( .setfp fpreg, sp ) ...@@ -57,6 +57,10 @@ UNWIND( .setfp fpreg, sp )
@ @
subs r2, sp, r0 @ SP above bottom of IRQ stack? subs r2, sp, r0 @ SP above bottom of IRQ stack?
rsbscs r2, r2, #THREAD_SIZE @ ... and below the top? rsbscs r2, r2, #THREAD_SIZE @ ... and below the top?
#ifdef CONFIG_VMAP_STACK
ldr_l r2, high_memory, cc @ End of the linear region
cmpcc r2, r0 @ Stack pointer was below it?
#endif
movcs sp, r0 @ If so, revert to incoming SP movcs sp, r0 @ If so, revert to incoming SP
#ifndef CONFIG_UNWINDER_ARM #ifndef CONFIG_UNWINDER_ARM
...@@ -188,13 +192,18 @@ ENDPROC(__und_invalid) ...@@ -188,13 +192,18 @@ ENDPROC(__und_invalid)
#define SPFIX(code...) #define SPFIX(code...)
#endif #endif
.macro svc_entry, stack_hole=0, trace=1, uaccess=1 .macro svc_entry, stack_hole=0, trace=1, uaccess=1, overflow_check=1
UNWIND(.fnstart ) UNWIND(.fnstart )
UNWIND(.save {r0 - pc} )
sub sp, sp, #(SVC_REGS_SIZE + \stack_hole) sub sp, sp, #(SVC_REGS_SIZE + \stack_hole)
THUMB( add sp, r1 ) @ get SP in a GPR without
THUMB( sub r1, sp, r1 ) @ using a temp register
.if \overflow_check
UNWIND(.save {r0 - pc} )
do_overflow_check (SVC_REGS_SIZE + \stack_hole)
.endif
#ifdef CONFIG_THUMB2_KERNEL #ifdef CONFIG_THUMB2_KERNEL
add sp, r1 @ get SP in a GPR without
sub r1, sp, r1 @ using a temp register
tst r1, #4 @ test stack pointer alignment tst r1, #4 @ test stack pointer alignment
sub r1, sp, r1 @ restore original R1 sub r1, sp, r1 @ restore original R1
sub sp, r1 @ restore original SP sub sp, r1 @ restore original SP
...@@ -827,12 +836,20 @@ ENTRY(__switch_to) ...@@ -827,12 +836,20 @@ ENTRY(__switch_to)
str r7, [r8] str r7, [r8]
#endif #endif
mov r0, r5 mov r0, r5
#if !defined(CONFIG_THUMB2_KERNEL) #if !defined(CONFIG_THUMB2_KERNEL) && !defined(CONFIG_VMAP_STACK)
set_current r7 set_current r7
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
#else #else
mov r1, r7 mov r1, r7
ldmia r4, {r4 - sl, fp, ip, lr} @ Load all regs saved previously ldmia r4, {r4 - sl, fp, ip, lr} @ Load all regs saved previously
#ifdef CONFIG_VMAP_STACK
@
@ Do a dummy read from the new stack while running from the old one so
@ that we can rely on do_translation_fault() to fix up any stale PMD
@ entries covering the vmalloc region.
@
ldr r2, [ip]
#endif
@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what @ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
@ effectuates the task switch, as that is what causes the observable @ effectuates the task switch, as that is what causes the observable
...@@ -849,6 +866,76 @@ ENTRY(__switch_to) ...@@ -849,6 +866,76 @@ ENTRY(__switch_to)
UNWIND(.fnend ) UNWIND(.fnend )
ENDPROC(__switch_to) ENDPROC(__switch_to)
#ifdef CONFIG_VMAP_STACK
.text
.align 2
__bad_stack:
@
@ We've just detected an overflow. We need to load the address of this
@ CPU's overflow stack into the stack pointer register. We have only one
@ scratch register so let's use a sequence of ADDs including one
@ involving the PC, and decorate them with PC-relative group
@ relocations. As these are ARM only, switch to ARM mode first.
@
@ We enter here with IP clobbered and its value stashed on the mode
@ stack.
@
THUMB( bx pc )
THUMB( nop )
THUMB( .arm )
mrc p15, 0, ip, c13, c0, 4 @ Get per-CPU offset
.globl overflow_stack_ptr
.reloc 0f, R_ARM_ALU_PC_G0_NC, overflow_stack_ptr
.reloc 1f, R_ARM_ALU_PC_G1_NC, overflow_stack_ptr
.reloc 2f, R_ARM_LDR_PC_G2, overflow_stack_ptr
add ip, ip, pc
0: add ip, ip, #-4
1: add ip, ip, #0
2: ldr ip, [ip, #4]
str sp, [ip, #-4]! @ Preserve original SP value
mov sp, ip @ Switch to overflow stack
pop {ip} @ Original SP in IP
#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
mov ip, ip @ mov expected by unwinder
push {fp, ip, lr, pc} @ GCC flavor frame record
#else
str ip, [sp, #-8]! @ store original SP
push {fpreg, lr} @ Clang flavor frame record
#endif
UNWIND( ldr ip, [r0, #4] ) @ load exception LR
UNWIND( str ip, [sp, #12] ) @ store in the frame record
ldr ip, [r0, #12] @ reload IP
@ Store the original GPRs to the new stack.
svc_entry uaccess=0, overflow_check=0
UNWIND( .save {sp, pc} )
UNWIND( .save {fpreg, lr} )
UNWIND( .setfp fpreg, sp )
ldr fpreg, [sp, #S_SP] @ Add our frame record
@ to the linked list
#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
ldr r1, [fp, #4] @ reload SP at entry
add fp, fp, #12
#else
ldr r1, [fpreg, #8]
#endif
str r1, [sp, #S_SP] @ store in pt_regs
@ Stash the regs for handle_bad_stack
mov r0, sp
@ Time to die
bl handle_bad_stack
nop
UNWIND( .fnend )
ENDPROC(__bad_stack)
#endif
__INIT __INIT
/* /*
......
...@@ -423,3 +423,40 @@ scno .req r7 @ syscall number ...@@ -423,3 +423,40 @@ scno .req r7 @ syscall number
tbl .req r8 @ syscall table pointer tbl .req r8 @ syscall table pointer
why .req r8 @ Linux syscall (!= 0) why .req r8 @ Linux syscall (!= 0)
tsk .req r9 @ current thread_info tsk .req r9 @ current thread_info
.macro do_overflow_check, frame_size:req
#ifdef CONFIG_VMAP_STACK
@
@ Test whether the SP has overflowed. Task and IRQ stacks are aligned
@ so that SP & BIT(THREAD_SIZE_ORDER + PAGE_SHIFT) should always be
@ zero.
@
ARM( tst sp, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT) )
THUMB( tst r1, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT) )
THUMB( it ne )
bne .Lstack_overflow_check\@
.pushsection .text
.Lstack_overflow_check\@:
@
@ The stack pointer is not pointing to a valid vmap'ed stack, but it
@ may be pointing into the linear map instead, which may happen if we
@ are already running from the overflow stack. We cannot detect overflow
@ in such cases so just carry on.
@
str ip, [r0, #12] @ Stash IP on the mode stack
ldr_l ip, high_memory @ Start of VMALLOC space
ARM( cmp sp, ip ) @ SP in vmalloc space?
THUMB( cmp r1, ip )
THUMB( itt lo )
ldrlo ip, [r0, #12] @ Restore IP
blo .Lout\@ @ Carry on
THUMB( sub r1, sp, r1 ) @ Restore original R1
THUMB( sub sp, r1 ) @ Restore original SP
add sp, sp, #\frame_size @ Undo svc_entry's SP change
b __bad_stack @ Handle VMAP stack overflow
.popsection
.Lout\@:
#endif
.endm
...@@ -56,7 +56,14 @@ static void __init init_irq_stacks(void) ...@@ -56,7 +56,14 @@ static void __init init_irq_stacks(void)
int cpu; int cpu;
for_each_possible_cpu(cpu) { for_each_possible_cpu(cpu) {
stack = (u8 *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER); if (!IS_ENABLED(CONFIG_VMAP_STACK))
stack = (u8 *)__get_free_pages(GFP_KERNEL,
THREAD_SIZE_ORDER);
else
stack = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN,
THREADINFO_GFP, NUMA_NO_NODE,
__builtin_return_address(0));
if (WARN_ON(!stack)) if (WARN_ON(!stack))
break; break;
per_cpu(irq_stack_ptr, cpu) = &stack[THREAD_SIZE]; per_cpu(irq_stack_ptr, cpu) = &stack[THREAD_SIZE];
......
...@@ -141,10 +141,10 @@ EXPORT_SYMBOL(outer_cache); ...@@ -141,10 +141,10 @@ EXPORT_SYMBOL(outer_cache);
int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN; int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN;
struct stack { struct stack {
u32 irq[3]; u32 irq[4];
u32 abt[3]; u32 abt[4];
u32 und[3]; u32 und[4];
u32 fiq[3]; u32 fiq[4];
} ____cacheline_aligned; } ____cacheline_aligned;
#ifndef CONFIG_CPU_V7M #ifndef CONFIG_CPU_V7M
......
...@@ -67,6 +67,14 @@ ENTRY(__cpu_suspend) ...@@ -67,6 +67,14 @@ ENTRY(__cpu_suspend)
ldr r4, =cpu_suspend_size ldr r4, =cpu_suspend_size
#endif #endif
mov r5, sp @ current virtual SP mov r5, sp @ current virtual SP
#ifdef CONFIG_VMAP_STACK
@ Run the suspend code from the overflow stack so we don't have to rely
@ on vmalloc-to-phys conversions anywhere in the arch suspend code.
@ The original SP value captured in R5 will be restored on the way out.
mov_l r6, overflow_stack_ptr @ Base pointer
mrc p15, 0, r7, c13, c0, 4 @ Get per-CPU offset
ldr sp, [r6, r7] @ Address of this CPU's overflow stack
#endif
add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn
sub sp, sp, r4 @ allocate CPU state on stack sub sp, sp, r4 @ allocate CPU state on stack
ldr r3, =sleep_save_sp ldr r3, =sleep_save_sp
......
...@@ -121,7 +121,8 @@ void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl) ...@@ -121,7 +121,8 @@ void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl)
static int verify_stack(unsigned long sp) static int verify_stack(unsigned long sp)
{ {
if (sp < PAGE_OFFSET || if (sp < PAGE_OFFSET ||
(sp > (unsigned long)high_memory && high_memory != NULL)) (!IS_ENABLED(CONFIG_VMAP_STACK) &&
sp > (unsigned long)high_memory && high_memory != NULL))
return -EFAULT; return -EFAULT;
return 0; return 0;
...@@ -291,7 +292,8 @@ static int __die(const char *str, int err, struct pt_regs *regs) ...@@ -291,7 +292,8 @@ static int __die(const char *str, int err, struct pt_regs *regs)
if (!user_mode(regs) || in_interrupt()) { if (!user_mode(regs) || in_interrupt()) {
dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp, dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
ALIGN(regs->ARM_sp, THREAD_SIZE)); ALIGN(regs->ARM_sp - THREAD_SIZE, THREAD_ALIGN)
+ THREAD_SIZE);
dump_backtrace(regs, tsk, KERN_EMERG); dump_backtrace(regs, tsk, KERN_EMERG);
dump_instr(KERN_EMERG, regs); dump_instr(KERN_EMERG, regs);
} }
...@@ -838,3 +840,77 @@ void __init early_trap_init(void *vectors_base) ...@@ -838,3 +840,77 @@ void __init early_trap_init(void *vectors_base)
*/ */
#endif #endif
} }
#ifdef CONFIG_VMAP_STACK
DECLARE_PER_CPU(u8 *, irq_stack_ptr);
asmlinkage DEFINE_PER_CPU(u8 *, overflow_stack_ptr);
static int __init allocate_overflow_stacks(void)
{
u8 *stack;
int cpu;
for_each_possible_cpu(cpu) {
stack = (u8 *)__get_free_page(GFP_KERNEL);
if (WARN_ON(!stack))
return -ENOMEM;
per_cpu(overflow_stack_ptr, cpu) = &stack[OVERFLOW_STACK_SIZE];
}
return 0;
}
early_initcall(allocate_overflow_stacks);
asmlinkage void handle_bad_stack(struct pt_regs *regs)
{
unsigned long tsk_stk = (unsigned long)current->stack;
unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
unsigned long ovf_stk = (unsigned long)this_cpu_read(overflow_stack_ptr);
console_verbose();
pr_emerg("Insufficient stack space to handle exception!");
pr_emerg("Task stack: [0x%08lx..0x%08lx]\n",
tsk_stk, tsk_stk + THREAD_SIZE);
pr_emerg("IRQ stack: [0x%08lx..0x%08lx]\n",
irq_stk - THREAD_SIZE, irq_stk);
pr_emerg("Overflow stack: [0x%08lx..0x%08lx]\n",
ovf_stk - OVERFLOW_STACK_SIZE, ovf_stk);
die("kernel stack overflow", regs, 0);
}
/*
* Normally, we rely on the logic in do_translation_fault() to update stale PMD
* entries covering the vmalloc space in a task's page tables when it first
* accesses the region in question. Unfortunately, this is not sufficient when
* the task stack resides in the vmalloc region, as do_translation_fault() is a
* C function that needs a stack to run.
*
* So we need to ensure that these PMD entries are up to date *before* the MM
* switch. As we already have some logic in the MM switch path that takes care
* of this, let's trigger it by bumping the counter every time the core vmalloc
* code modifies a PMD entry in the vmalloc region.
*/
void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
{
if (start > VMALLOC_END || end < VMALLOC_START)
return;
/*
* This hooks into the core vmalloc code to receive notifications of
* any PMD level changes that have been made to the kernel page tables.
* This means it should only be triggered once for every MiB worth of
* vmalloc space, given that we don't support huge vmalloc/vmap on ARM,
* and that kernel PMD level table entries are rarely (if ever)
* updated.
*
* This means that the counter is going to max out at ~250 for the
* typical case. If it overflows, something entirely unexpected has
* occurred so let's throw a warning if that happens.
*/
WARN_ON(++init_mm.context.vmalloc_seq == UINT_MAX);
}
#endif
...@@ -389,7 +389,8 @@ int unwind_frame(struct stackframe *frame) ...@@ -389,7 +389,8 @@ int unwind_frame(struct stackframe *frame)
/* store the highest address on the stack to avoid crossing it*/ /* store the highest address on the stack to avoid crossing it*/
ctrl.sp_low = frame->sp; ctrl.sp_low = frame->sp;
ctrl.sp_high = ALIGN(ctrl.sp_low, THREAD_SIZE); ctrl.sp_high = ALIGN(ctrl.sp_low - THREAD_SIZE, THREAD_ALIGN)
+ THREAD_SIZE;
pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__, pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
frame->pc, frame->lr, frame->sp); frame->pc, frame->lr, frame->sp);
......
...@@ -138,12 +138,12 @@ SECTIONS ...@@ -138,12 +138,12 @@ SECTIONS
#ifdef CONFIG_STRICT_KERNEL_RWX #ifdef CONFIG_STRICT_KERNEL_RWX
. = ALIGN(1<<SECTION_SHIFT); . = ALIGN(1<<SECTION_SHIFT);
#else #else
. = ALIGN(THREAD_SIZE); . = ALIGN(THREAD_ALIGN);
#endif #endif
__init_end = .; __init_end = .;
_sdata = .; _sdata = .;
RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
_edata = .; _edata = .;
BSS_SECTION(0, 0, 0) BSS_SECTION(0, 0, 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment