Merge tag 'irqchip-4.20' of...

Merge tag 'irqchip-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates from Marc Zyngier:

 - kexec/kdump support for EFI-based GICv3 platforms
 - Marvell SEI support
 - QC PDC fixes
 - GIC cleanups and optimizations
 - DT updates

[ tglx: Dropped the madera driver as it breaks the build ]

Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt

@@ -5,6 +5,8 @@ The Marvell ICU (Interrupt Consolidation Unit) controller is
 responsible for collecting all wired-interrupt sources in the CP and
 communicating them to the GIC in the AP, the unit translates interrupt
 requests on input wires to MSG memory mapped transactions to the GIC.
+These messages will access a different GIC memory area depending on
+their type (NSR, SR, SEI, REI, etc).
 
 Required properties:
 
@@ -12,20 +14,23 @@ Required properties:
 
 - reg: Should contain ICU registers location and length.
 
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 3.
+Subnodes: Each group of interrupt is declared as a subnode of the ICU,
+with their own compatible.
+
+Required properties for the icu_nsr/icu_sei subnodes:
 
-  The 1st cell is the group type of the ICU interrupt. Possible group
-  types are:
+- compatible: Should be one of:
+              * "marvell,cp110-icu-nsr"
+	      * "marvell,cp110-icu-sr"
+	      * "marvell,cp110-icu-sei"
+	      * "marvell,cp110-icu-rei"
 
-   ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
-   ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
-   ICU_GRP_SEI (0x4) : System error interrupt
-   ICU_GRP_REI (0x5) : RAM error interrupt
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 2.
 
-  The 2nd cell is the index of the interrupt in the ICU unit.
+  The 1st cell is the index of the interrupt in the ICU unit.
 
-  The 3rd cell is the type of the interrupt. See arm,gic.txt for
+  The 2nd cell is the type of the interrupt. See arm,gic.txt for
   details.
 
 - interrupt-controller: Identifies the node as an interrupt
@@ -35,17 +40,73 @@ Required properties:
   that allows to trigger interrupts using MSG memory mapped
   transactions.
 
+Note: each 'interrupts' property referring to any 'icu_xxx' node shall
+      have a different number within [0:206].
+
 Example:
 
 icu: interrupt-controller@1e0000 {
 	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x10>;
+	reg = <0x1e0000 0x440>;
+
+	CP110_LABEL(icu_nsr): interrupt-controller@10 {
+		compatible = "marvell,cp110-icu-nsr";
+		reg = <0x10 0x20>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		msi-parent = <&gicp>;
+	};
+
+	CP110_LABEL(icu_sei): interrupt-controller@50 {
+		compatible = "marvell,cp110-icu-sei";
+		reg = <0x50 0x10>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		msi-parent = <&sei>;
+	};
+};
+
+node1 {
+	interrupt-parent = <&icu_nsr>;
+	interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+node2 {
+	interrupt-parent = <&icu_sei>;
+	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Would not work with the above nodes */
+node3 {
+	interrupt-parent = <&icu_nsr>;
+	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+The legacy bindings were different in this way:
+
+- #interrupt-cells: The value was 3.
+	The 1st cell was the group type of the ICU interrupt. Possible
+	group types were:
+	ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
+	ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
+	ICU_GRP_SEI (0x4) : System error interrupt
+	ICU_GRP_REI (0x5) : RAM error interrupt
+	The 2nd cell was the index of the interrupt in the ICU unit.
+	The 3rd cell was the type of the interrupt. See arm,gic.txt for
+	details.
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+	compatible = "marvell,cp110-icu";
+	reg = <0x1e0000 0x440>;
+
 	#interrupt-cells = <3>;
 	interrupt-controller;
 	msi-parent = <&gicp>;
 };
 
-usb3h0: usb3@500000 {
+node1 {
 	interrupt-parent = <&icu>;
 	interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
 };

Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt

+Marvell SEI (System Error Interrupt) Controller
+-----------------------------------------------
+
+Marvell SEI (System Error Interrupt) controller is an interrupt
+aggregator. It receives interrupts from several sources and aggregates
+them to a single interrupt line (an SPI) on the parent interrupt
+controller.
+
+This interrupt controller can handle up to 64 SEIs, a set comes from the
+AP and is wired while a second set comes from the CPs by the mean of
+MSIs.
+
+Required properties:
+
+- compatible: should be one of:
+              * "marvell,ap806-sei"
+- reg: SEI registers location and length.
+- interrupts: identifies the parent IRQ that will be triggered.
+- #interrupt-cells: number of cells to define an SEI wired interrupt
+                    coming from the AP, should be 1. The cell is the IRQ
+                    number.
+- interrupt-controller: identifies the node as an interrupt controller
+                        for AP interrupts.
+- msi-controller: identifies the node as an MSI controller for the CPs
+                  interrupts.
+
+Example:
+
+        sei: interrupt-controller@3f0200 {
+                compatible = "marvell,ap806-sei";
+                reg = <0x3f0200 0x40>;
+                interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
+                msi-controller;
+        };

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

@@ -2,10 +2,12 @@ DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
 
 Required properties:
 
-- compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback.
+- compatible: must be "renesas,irqc-<soctype>" or "renesas,intc-ex-<soctype>",
+	      and "renesas,irqc" as fallback.
   Examples with soctypes are:
     - "renesas,irqc-r8a73a4" (R-Mobile APE6)
     - "renesas,irqc-r8a7743" (RZ/G1M)
+    - "renesas,irqc-r8a7744" (RZ/G1N)
     - "renesas,irqc-r8a7745" (RZ/G1E)
     - "renesas,irqc-r8a77470" (RZ/G1C)
     - "renesas,irqc-r8a7790" (R-Car H2)
@@ -19,6 +21,7 @@ Required properties:
     - "renesas,intc-ex-r8a77965" (R-Car M3-N)
     - "renesas,intc-ex-r8a77970" (R-Car V3M)
     - "renesas,intc-ex-r8a77980" (R-Car V3H)
+    - "renesas,intc-ex-r8a77990" (R-Car E3)
     - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
   interrupts.txt in this directory

arch/arm64/Kconfig.platforms

@@ -128,6 +128,7 @@ config ARCH_MVEBU
 	select MVEBU_ICU
 	select MVEBU_ODMI
 	select MVEBU_PIC
+	select MVEBU_SEI
 	select OF_GPIO
 	select PINCTRL
 	select PINCTRL_ARMADA_37XX

drivers/base/platform-msi.c

@@ -321,11 +321,12 @@ void *platform_msi_get_host_data(struct irq_domain *domain)
  * Returns an irqdomain for @nvec interrupts
  */
 struct irq_domain *
-platform_msi_create_device_domain(struct device *dev,
-				  unsigned int nvec,
-				  irq_write_msi_msg_t write_msi_msg,
-				  const struct irq_domain_ops *ops,
-				  void *host_data)
+__platform_msi_create_device_domain(struct device *dev,
+				    unsigned int nvec,
+				    bool is_tree,
+				    irq_write_msi_msg_t write_msi_msg,
+				    const struct irq_domain_ops *ops,
+				    void *host_data)
 {
 	struct platform_msi_priv_data *data;
 	struct irq_domain *domain;
@@ -336,7 +337,8 @@ platform_msi_create_device_domain(struct device *dev,
 		return NULL;
 
 	data->host_data = host_data;
-	domain = irq_domain_create_hierarchy(dev->msi_domain, 0, nvec,
+	domain = irq_domain_create_hierarchy(dev->msi_domain, 0,
+					     is_tree ? 0 : nvec,
 					     dev->fwnode, ops, data);
 	if (!domain)
 		goto free_priv;

drivers/firmware/efi/efi.c

@@ -52,7 +52,8 @@ struct efi __read_mostly efi = {
 	.properties_table	= EFI_INVALID_TABLE_ADDR,
 	.mem_attr_table		= EFI_INVALID_TABLE_ADDR,
 	.rng_seed		= EFI_INVALID_TABLE_ADDR,
-	.tpm_log		= EFI_INVALID_TABLE_ADDR
+	.tpm_log		= EFI_INVALID_TABLE_ADDR,
+	.mem_reserve		= EFI_INVALID_TABLE_ADDR,
 };
 EXPORT_SYMBOL(efi);
 
@@ -484,6 +485,7 @@ static __initdata efi_config_table_type_t common_tables[] = {
 	{EFI_MEMORY_ATTRIBUTES_TABLE_GUID, "MEMATTR", &efi.mem_attr_table},
 	{LINUX_EFI_RANDOM_SEED_TABLE_GUID, "RNG", &efi.rng_seed},
 	{LINUX_EFI_TPM_EVENT_LOG_GUID, "TPMEventLog", &efi.tpm_log},
+	{LINUX_EFI_MEMRESERVE_TABLE_GUID, "MEMRESERVE", &efi.mem_reserve},
 	{NULL_GUID, NULL, NULL},
 };
 
@@ -591,6 +593,29 @@ int __init efi_config_parse_tables(void *config_tables, int count, int sz,
 		early_memunmap(tbl, sizeof(*tbl));
 	}
 
+	if (efi.mem_reserve != EFI_INVALID_TABLE_ADDR) {
+		unsigned long prsv = efi.mem_reserve;
+
+		while (prsv) {
+			struct linux_efi_memreserve *rsv;
+
+			/* reserve the entry itself */
+			memblock_reserve(prsv, sizeof(*rsv));
+
+			rsv = early_memremap(prsv, sizeof(*rsv));
+			if (rsv == NULL) {
+				pr_err("Could not map UEFI memreserve entry!\n");
+				return -ENOMEM;
+			}
+
+			if (rsv->size)
+				memblock_reserve(rsv->base, rsv->size);
+
+			prsv = rsv->next;
+			early_memunmap(rsv, sizeof(*rsv));
+		}
+	}
+
 	return 0;
 }
 
@@ -937,6 +962,38 @@ bool efi_is_table_address(unsigned long phys_addr)
 	return false;
 }
 
+static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
+
+int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
+{
+	struct linux_efi_memreserve *rsv, *parent;
+
+	if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
+		return -ENODEV;
+
+	rsv = kmalloc(sizeof(*rsv), GFP_KERNEL);
+	if (!rsv)
+		return -ENOMEM;
+
+	parent = memremap(efi.mem_reserve, sizeof(*rsv), MEMREMAP_WB);
+	if (!parent) {
+		kfree(rsv);
+		return -ENOMEM;
+	}
+
+	rsv->base = addr;
+	rsv->size = size;
+
+	spin_lock(&efi_mem_reserve_persistent_lock);
+	rsv->next = parent->next;
+	parent->next = __pa(rsv);
+	spin_unlock(&efi_mem_reserve_persistent_lock);
+
+	memunmap(parent);
+
+	return 0;
+}
+
 #ifdef CONFIG_KEXEC
 static int update_efi_random_seed(struct notifier_block *nb,
 				  unsigned long code, void *unused)

drivers/firmware/efi/libstub/arm-stub.c

@@ -69,6 +69,31 @@ static struct screen_info *setup_graphics(efi_system_table_t *sys_table_arg)
 	return si;
 }
 
+void install_memreserve_table(efi_system_table_t *sys_table_arg)
+{
+	struct linux_efi_memreserve *rsv;
+	efi_guid_t memreserve_table_guid = LINUX_EFI_MEMRESERVE_TABLE_GUID;
+	efi_status_t status;
+
+	status = efi_call_early(allocate_pool, EFI_LOADER_DATA, sizeof(*rsv),
+				(void **)&rsv);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err(sys_table_arg, "Failed to allocate memreserve entry!\n");
+		return;
+	}
+
+	rsv->next = 0;
+	rsv->base = 0;
+	rsv->size = 0;
+
+	status = efi_call_early(install_configuration_table,
+				&memreserve_table_guid,
+				rsv);
+	if (status != EFI_SUCCESS)
+		pr_efi_err(sys_table_arg, "Failed to install memreserve config table!\n");
+}
+
+
 /*
  * This function handles the architcture specific differences between arm and
  * arm64 regarding where the kernel image must be loaded and any memory that
@@ -235,6 +260,8 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table,
 		}
 	}
 
+	install_memreserve_table(sys_table);
+
 	new_fdt_addr = fdt_addr;
 	status = allocate_new_fdt_and_exit_boot(sys_table, handle,
 				&new_fdt_addr, efi_get_max_fdt_addr(dram_base),

drivers/irqchip/Kconfig

@@ -310,6 +310,9 @@ config MVEBU_ODMI
 config MVEBU_PIC
 	bool
 
+config MVEBU_SEI
+        bool
+
 config LS_SCFG_MSI
 	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
 	depends on PCI && PCI_MSI

drivers/irqchip/Makefile

@@ -76,6 +76,7 @@ obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
 obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
 obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
+obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o

drivers/irqchip/irq-gic-v3.c

@@ -348,48 +348,45 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs
 {
 	u32 irqnr;
 
-	do {
-		irqnr = gic_read_iar();
+	irqnr = gic_read_iar();
 
-		if (likely(irqnr > 15 && irqnr < 1020) || irqnr >= 8192) {
-			int err;
+	if (likely(irqnr > 15 && irqnr < 1020) || irqnr >= 8192) {
+		int err;
 
-			if (static_branch_likely(&supports_deactivate_key))
+		if (static_branch_likely(&supports_deactivate_key))
+			gic_write_eoir(irqnr);
+		else
+			isb();
+
+		err = handle_domain_irq(gic_data.domain, irqnr, regs);
+		if (err) {
+			WARN_ONCE(true, "Unexpected interrupt received!\n");
+			if (static_branch_likely(&supports_deactivate_key)) {
+				if (irqnr < 8192)
+					gic_write_dir(irqnr);
+			} else {
 				gic_write_eoir(irqnr);
-			else
-				isb();
-
-			err = handle_domain_irq(gic_data.domain, irqnr, regs);
-			if (err) {
-				WARN_ONCE(true, "Unexpected interrupt received!\n");
-				if (static_branch_likely(&supports_deactivate_key)) {
-					if (irqnr < 8192)
-						gic_write_dir(irqnr);
-				} else {
-					gic_write_eoir(irqnr);
-				}
 			}
-			continue;
 		}
-		if (irqnr < 16) {
-			gic_write_eoir(irqnr);
-			if (static_branch_likely(&supports_deactivate_key))
-				gic_write_dir(irqnr);
+		return;
+	}
+	if (irqnr < 16) {
+		gic_write_eoir(irqnr);
+		if (static_branch_likely(&supports_deactivate_key))
+			gic_write_dir(irqnr);
 #ifdef CONFIG_SMP
-			/*
-			 * Unlike GICv2, we don't need an smp_rmb() here.
-			 * The control dependency from gic_read_iar to
-			 * the ISB in gic_write_eoir is enough to ensure
-			 * that any shared data read by handle_IPI will
-			 * be read after the ACK.
-			 */
-			handle_IPI(irqnr, regs);
+		/*
+		 * Unlike GICv2, we don't need an smp_rmb() here.
+		 * The control dependency from gic_read_iar to
+		 * the ISB in gic_write_eoir is enough to ensure
+		 * that any shared data read by handle_IPI will
+		 * be read after the ACK.
+		 */
+		handle_IPI(irqnr, regs);
 #else
-			WARN_ONCE(true, "Unexpected SGI received!\n");
+		WARN_ONCE(true, "Unexpected SGI received!\n");
 #endif
-			continue;
-		}
-	} while (irqnr != ICC_IAR1_EL1_SPURIOUS);
+	}
 }
 
 static void __init gic_dist_init(void)
@@ -653,7 +650,9 @@ early_param("irqchip.gicv3_nolpi", gicv3_nolpi_cfg);
 
 static int gic_dist_supports_lpis(void)
 {
-	return !!(readl_relaxed(gic_data.dist_base + GICD_TYPER) & GICD_TYPER_LPIS) && !gicv3_nolpi;
+	return (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) &&
+		!!(readl_relaxed(gic_data.dist_base + GICD_TYPER) & GICD_TYPER_LPIS) &&
+		!gicv3_nolpi);
 }
 
 static void gic_cpu_init(void)
@@ -673,10 +672,6 @@ static void gic_cpu_init(void)
 
 	gic_cpu_config(rbase, gic_redist_wait_for_rwp);
 
-	/* Give LPIs a spin */
-	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis())
-		its_cpu_init();
-
 	/* initialise system registers */
 	gic_cpu_sys_reg_init();
 }
@@ -689,6 +684,10 @@ static void gic_cpu_init(void)
 static int gic_starting_cpu(unsigned int cpu)
 {
 	gic_cpu_init();
+
+	if (gic_dist_supports_lpis())
+		its_cpu_init();
+
 	return 0;
 }
 
@@ -1127,14 +1126,16 @@ static int __init gic_init_bases(void __iomem *dist_base,
 
 	gic_update_vlpi_properties();
 
-	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis())
-		its_init(handle, &gic_data.rdists, gic_data.domain);
-
 	gic_smp_init();
 	gic_dist_init();
 	gic_cpu_init();
 	gic_cpu_pm_init();
 
+	if (gic_dist_supports_lpis()) {
+		its_init(handle, &gic_data.rdists, gic_data.domain);
+		its_cpu_init();
+	}
+
 	return 0;
 
 out_free:

drivers/irqchip/qcom-pdc.c

@@ -124,6 +124,7 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
 		break;
 	case IRQ_TYPE_EDGE_BOTH:
 		pdc_type = PDC_EDGE_DUAL;
+		type = IRQ_TYPE_EDGE_RISING;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 		pdc_type = PDC_LEVEL_HIGH;

include/linux/efi.h

@@ -672,6 +672,7 @@ void efi_native_runtime_setup(void);
 #define LINUX_EFI_LOADER_ENTRY_GUID		EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf,  0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f)
 #define LINUX_EFI_RANDOM_SEED_TABLE_GUID	EFI_GUID(0x1ce1e5bc, 0x7ceb, 0x42f2,  0x81, 0xe5, 0x8a, 0xad, 0xf1, 0x80, 0xf5, 0x7b)
 #define LINUX_EFI_TPM_EVENT_LOG_GUID		EFI_GUID(0xb7799cb0, 0xeca2, 0x4943,  0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa)
+#define LINUX_EFI_MEMRESERVE_TABLE_GUID		EFI_GUID(0x888eb0c6, 0x8ede, 0x4ff5,  0xa8, 0xf0, 0x9a, 0xee, 0x5c, 0xb9, 0x77, 0xc2)
 
 typedef struct {
 	efi_guid_t guid;
@@ -957,6 +958,7 @@ extern struct efi {
 	unsigned long mem_attr_table;	/* memory attributes table */
 	unsigned long rng_seed;		/* UEFI firmware random seed */
 	unsigned long tpm_log;		/* TPM2 Event Log table */
+	unsigned long mem_reserve;	/* Linux EFI memreserve table */
 	efi_get_time_t *get_time;
 	efi_set_time_t *set_time;
 	efi_get_wakeup_time_t *get_wakeup_time;
@@ -1041,6 +1043,7 @@ extern int __init efi_uart_console_only (void);
 extern u64 efi_mem_desc_end(efi_memory_desc_t *md);
 extern int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md);
 extern void efi_mem_reserve(phys_addr_t addr, u64 size);
+extern int efi_mem_reserve_persistent(phys_addr_t addr, u64 size);
 extern void efi_initialize_iomem_resources(struct resource *code_resource,
 		struct resource *data_resource, struct resource *bss_resource);
 extern void efi_reserve_boot_services(void);
@@ -1662,4 +1665,10 @@ extern int efi_tpm_eventlog_init(void);
 /* Workqueue to queue EFI Runtime Services */
 extern struct workqueue_struct *efi_rts_wq;
 
+struct linux_efi_memreserve {
+	phys_addr_t	next;
+	phys_addr_t	base;
+	phys_addr_t	size;
+};
+
 #endif /* _LINUX_EFI_H */

include/linux/irqchip/arm-gic-common.h

@@ -13,6 +13,12 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 
+#define GICD_INT_DEF_PRI		0xa0
+#define GICD_INT_DEF_PRI_X4		((GICD_INT_DEF_PRI << 24) |\
+					(GICD_INT_DEF_PRI << 16) |\
+					(GICD_INT_DEF_PRI << 8) |\
+					GICD_INT_DEF_PRI)
+
 enum gic_type {
 	GIC_V2,
 	GIC_V3,

include/linux/irqchip/arm-gic-v3.h

@@ -585,8 +585,10 @@ struct rdists {
 		void __iomem	*rd_base;
 		struct page	*pend_page;
 		phys_addr_t	phys_base;
+		bool		lpi_enabled;
 	} __percpu		*rdist;
-	struct page		*prop_page;
+	phys_addr_t		prop_table_pa;
+	void			*prop_table_va;
 	u64			flags;
 	u32			gicd_typer;
 	bool			has_vlpis;

include/linux/irqchip/arm-gic.h

@@ -65,11 +65,6 @@
 #define GICD_INT_EN_CLR_X32		0xffffffff
 #define GICD_INT_EN_SET_SGI		0x0000ffff
 #define GICD_INT_EN_CLR_PPI		0xffff0000
-#define GICD_INT_DEF_PRI		0xa0
-#define GICD_INT_DEF_PRI_X4		((GICD_INT_DEF_PRI << 24) |\
-					(GICD_INT_DEF_PRI << 16) |\
-					(GICD_INT_DEF_PRI << 8) |\
-					GICD_INT_DEF_PRI)
 
 #define GICD_IIDR_IMPLEMENTER_SHIFT	0
 #define GICD_IIDR_IMPLEMENTER_MASK	(0xfff << GICD_IIDR_IMPLEMENTER_SHIFT)

include/linux/irqdomain.h

@@ -75,6 +75,7 @@ struct irq_fwspec {
 enum irq_domain_bus_token {
 	DOMAIN_BUS_ANY		= 0,
 	DOMAIN_BUS_WIRED,
+	DOMAIN_BUS_GENERIC_MSI,
 	DOMAIN_BUS_PCI_MSI,
 	DOMAIN_BUS_PLATFORM_MSI,
 	DOMAIN_BUS_NEXUS,

include/linux/msi.h

@@ -317,11 +317,18 @@ int msi_domain_prepare_irqs(struct irq_domain *domain, struct device *dev,
 int msi_domain_populate_irqs(struct irq_domain *domain, struct device *dev,
 			     int virq, int nvec, msi_alloc_info_t *args);
 struct irq_domain *
-platform_msi_create_device_domain(struct device *dev,
-				  unsigned int nvec,
-				  irq_write_msi_msg_t write_msi_msg,
-				  const struct irq_domain_ops *ops,
-				  void *host_data);
+__platform_msi_create_device_domain(struct device *dev,
+				    unsigned int nvec,
+				    bool is_tree,
+				    irq_write_msi_msg_t write_msi_msg,
+				    const struct irq_domain_ops *ops,
+				    void *host_data);
+
+#define platform_msi_create_device_domain(dev, nvec, write, ops, data)	\
+	__platform_msi_create_device_domain(dev, nvec, false, write, ops, data)
+#define platform_msi_create_device_tree_domain(dev, nvec, write, ops, data) \
+	__platform_msi_create_device_domain(dev, nvec, true, write, ops, data)
+
 int platform_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
 			      unsigned int nr_irqs);
 void platform_msi_domain_free(struct irq_domain *domain, unsigned int virq,