arm64: dts: renesas: r8a7795: salvator-xs: Sort nodes

Sort nodes.

If node address is present
   * Sort by node address, grouping all nodes with the same compat string
     and sorting the group alphabetically.
Else
   * Sort alphabetically

This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts

@@ -57,17 +57,6 @@ &ehci3 {
 	status = "okay";
 };
 
-&hsusb3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&sound_card {
-	dais = <&rsnd_port0	/* ak4613 */
-		&rsnd_port1	/* HDMI0  */
-		&rsnd_port2>;	/* HDMI1  */
-};
-
 &hdmi0 {
 	status = "okay";
 
@@ -114,6 +103,11 @@ &hdmi1_con {
 	remote-endpoint = <&rcar_dw_hdmi1_out>;
 };
 
+&hsusb3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &ohci2 {
 	status = "okay";
 };
@@ -123,36 +117,6 @@ &ohci3 {
 	status = "okay";
 };
 
-&rcar_sound {
-	ports {
-		/* rsnd_port0 is on salvator-common */
-		rsnd_port1: port@1 {
-			reg = <1>;
-			rsnd_endpoint1: endpoint {
-				remote-endpoint = <&dw_hdmi0_snd_in>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_endpoint1>;
-				frame-master = <&rsnd_endpoint1>;
-
-				playback = <&ssi2>;
-			};
-		};
-		rsnd_port2: port@2 {
-			reg = <2>;
-			rsnd_endpoint2: endpoint {
-				remote-endpoint = <&dw_hdmi1_snd_in>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_endpoint2>;
-				frame-master = <&rsnd_endpoint2>;
-
-				playback = <&ssi3>;
-			};
-		};
-	};
-};
-
 &pca9654 {
 	pcie_sata_switch {
 		gpio-hog;
@@ -186,11 +150,47 @@ usb2_ch3_pins: usb2_ch3 {
 	};
 };
 
+&rcar_sound {
+	ports {
+		/* rsnd_port0 is on salvator-common */
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_endpoint2: endpoint {
+				remote-endpoint = <&dw_hdmi1_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint2>;
+				frame-master = <&rsnd_endpoint2>;
+
+				playback = <&ssi3>;
+			};
+		};
+	};
+};
+
 /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
 &sata {
 	status = "okay";
 };
 
+&sound_card {
+	dais = <&rsnd_port0	/* ak4613 */
+		&rsnd_port1	/* HDMI0  */
+		&rsnd_port2>;	/* HDMI1  */
+};
+
 &usb2_phy2 {
 	pinctrl-0 = <&usb2_pins>;
 	pinctrl-names = "default";