Commit a29ae860 authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Jerome Brunet

clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers

Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers.
In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when
booting Linux the PLL fails to lock.
The initialization sequence from u-boot is:
- put the PLL into reset
- write 0x59C88000 to HHI_GP_PLL_CNTL2
- write 0xCA463823 to HHI_GP_PLL_CNTL3
- write 0x0286A027 to HHI_GP_PLL_CNTL4
- write 0x00003000 to HHI_GP_PLL_CNTL5
- set M, N, OD and the enable bit
- take the PLL out of reset
- check if it has locked
- disable the PLL

In Linux we already initialize M, N, OD, the enable and the reset bits.
Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the
exact meaning is unknown) so the PLL can lock when the vendor u-boot did
not initialize these registers yet.

Fixes: b882964b ("clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2")
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200501215717.735393-1-martin.blumenstingl@googlemail.com
parent 16afd70a
......@@ -1918,6 +1918,13 @@ static struct clk_regmap meson8b_mali = {
},
};
static const struct reg_sequence meson8m2_gp_pll_init_regs[] = {
{ .reg = HHI_GP_PLL_CNTL2, .def = 0x59c88000 },
{ .reg = HHI_GP_PLL_CNTL3, .def = 0xca463823 },
{ .reg = HHI_GP_PLL_CNTL4, .def = 0x0286a027 },
{ .reg = HHI_GP_PLL_CNTL5, .def = 0x00003000 },
};
static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
PLL_PARAMS(182, 3),
{ /* sentinel */ },
......@@ -1951,6 +1958,8 @@ static struct clk_regmap meson8m2_gp_pll_dco = {
.width = 1,
},
.table = meson8m2_gp_pll_params_table,
.init_regs = meson8m2_gp_pll_init_regs,
.init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs),
},
.hw.init = &(struct clk_init_data){
.name = "gp_pll_dco",
......
......@@ -20,6 +20,10 @@
* [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
*/
#define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */
#define HHI_GP_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */
#define HHI_GP_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */
#define HHI_GP_PLL_CNTL4 0x4C /* 0x13 offset in data sheet */
#define HHI_GP_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */
#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment