sh: __addr_ok() and other misc nommu fixups.

A few more outstanding nommu fixups..
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boot/compressed/Makefile

@@ -22,9 +22,9 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START     ?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
 
-IMAGE_OFFSET	:= $(shell printf "0x%8x" $$[$(CONFIG_PAGE_OFFSET)  + \
-					     $(CONFIG_MEMORY_START) + \
-					     $(CONFIG_BOOT_LINK_OFFSET)])
+IMAGE_OFFSET	:= $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET)  + \
+					      $(CONFIG_MEMORY_START) + \
+					      $(CONFIG_BOOT_LINK_OFFSET)])
 
 LIBGCC	:= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
 

arch/sh/kernel/process.c

@@ -302,9 +302,11 @@ ubc_set_tracing(int asid, unsigned long pc)
 {
 	ctrl_outl(pc, UBC_BARA);
 
+#ifdef CONFIG_MMU
 	/* We don't have any ASID settings for the SH-2! */
 	if (cpu_data->type != CPU_SH7604)
 		ctrl_outb(asid, UBC_BASRA);
+#endif
 
 	ctrl_outl(0, UBC_BAMRA);
 
@@ -347,6 +349,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne
 	}
 #endif
 
+#ifdef CONFIG_MMU
 	/*
 	 * Restore the kernel mode register
 	 *   	k7 (r7_bank1)
@@ -354,19 +357,21 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne
 	asm volatile("ldc	%0, r7_bank"
 		     : /* no output */
 		     : "r" (task_thread_info(next)));
+#endif
 
-#ifdef CONFIG_MMU
 	/* If no tasks are using the UBC, we're done */
 	if (ubc_usercnt == 0)
 		/* If no tasks are using the UBC, we're done */;
 	else if (next->thread.ubc_pc && next->mm) {
-		ubc_set_tracing(next->mm->context & MMU_CONTEXT_ASID_MASK,
-				next->thread.ubc_pc);
+		int asid = 0;
+#ifdef CONFIG_MMU
+		asid |= next->mm->context & MMU_CONTEXT_ASID_MASK;
+#endif
+		ubc_set_tracing(asid, next->thread.ubc_pc);
 	} else {
 		ctrl_outw(0, UBC_BBRA);
 		ctrl_outw(0, UBC_BBRB);
 	}
-#endif
 
 	return prev;
 }

arch/sh/kernel/sh_ksyms.c

@@ -79,20 +79,18 @@ EXPORT_SYMBOL(strcpy);
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
+#endif
 
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
 /* needed by some modules */
 EXPORT_SYMBOL(flush_cache_all);
 EXPORT_SYMBOL(flush_cache_range);
 EXPORT_SYMBOL(flush_dcache_page);
 EXPORT_SYMBOL(__flush_purge_region);
-EXPORT_SYMBOL(clear_user_page);
 #endif
 
-#if defined(CONFIG_SH7705_CACHE_32KB)
-EXPORT_SYMBOL(flush_cache_all);
-EXPORT_SYMBOL(flush_cache_range);
-EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(__flush_purge_region);
+#ifdef CONFIG_MMU
+EXPORT_SYMBOL(clear_user_page);
 #endif
 
 EXPORT_SYMBOL(flush_tlb_page);

arch/sh/kernel/sys_sh.c

@@ -44,7 +44,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	return error;
 }
 
-#if defined(HAVE_ARCH_UNMAPPED_AREA)
+#if defined(HAVE_ARCH_UNMAPPED_AREA) && defined(CONFIG_MMU)
 /*
  * To avoid cache alias, we map the shard page with same color.
  */

arch/sh/mm/Kconfig

@@ -194,7 +194,7 @@ config MEMORY_SIZE
 
 config 32BIT
 	bool "Support 32-bit physical addressing through PMB"
-	depends on CPU_SH4A
+	depends on CPU_SH4A && MMU
 	default y
 	help
 	  If you say Y here, physical addressing will be extended to

arch/sh/mm/Makefile

@@ -6,7 +6,7 @@ obj-y			:= init.o extable.o consistent.o
 
 obj-$(CONFIG_CPU_SH2)	+= cache-sh2.o
 obj-$(CONFIG_CPU_SH3)	+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o pg-sh4.o
+obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o
 
 obj-$(CONFIG_DMA_PAGE_OPS)	+= pg-dma.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
@@ -19,7 +19,7 @@ obj-y			+= $(mmu-y)
 
 ifdef CONFIG_MMU
 obj-$(CONFIG_CPU_SH3)		+= tlb-sh3.o
-obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o
+obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o pg-sh4.o
 obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
 endif
 

include/asm-sh/addrspace.h

@@ -14,7 +14,7 @@
 #include <asm/cpu/addrspace.h>
 
 /* Memory segments (32bit Privileged mode addresses)  */
-#ifdef CONFIG_MMU
+#ifndef CONFIG_CPU_SH2A
 #define P0SEG		0x00000000
 #define P1SEG		0x80000000
 #define P2SEG		0xa0000000
@@ -24,7 +24,7 @@
 #define P0SEG		0x00000000
 #define P1SEG		0x00000000
 #define P2SEG		0x20000000
-#define P3SEG		0x40000000
+#define P3SEG		0x00000000
 #define P4SEG 		0x80000000
 #endif
 

include/asm-sh/io.h

@@ -216,6 +216,7 @@ static inline void ctrl_delay(void)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
+#ifdef CONFIG_MMU
 /*
  * Change virtual addresses to physical addresses and vv.
  * These are trivial on the 1:1 Linux/SuperH mapping
@@ -229,6 +230,10 @@ static inline void *phys_to_virt(unsigned long address)
 {
 	return (void *)P1SEGADDR(address);
 }
+#else
+#define phys_to_virt(address)	((void *)(address))
+#define virt_to_phys(address)	((unsigned long)(address))
+#endif
 
 #define virt_to_bus virt_to_phys
 #define bus_to_virt phys_to_virt

include/asm-sh/uaccess.h

@@ -34,12 +34,12 @@
 
 #define segment_eq(a,b)	((a).seg == (b).seg)
 
-#define __addr_ok(addr) \
-	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
 #define get_ds()	(KERNEL_DS)
 
 #if !defined(CONFIG_MMU)
+/* NOMMU is always true */
+#define __addr_ok(addr) (1)
+
 static inline mm_segment_t get_fs(void)
 {
 	return USER_DS;
@@ -66,6 +66,9 @@ static inline int __access_ok(unsigned long addr, unsigned long size)
 	return ((addr >= memory_start) && ((addr + size) < memory_end));
 }
 #else /* CONFIG_MMU */
+#define __addr_ok(addr) \
+	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
 #define get_fs()	(current_thread_info()->addr_limit)
 #define set_fs(x)	(current_thread_info()->addr_limit = (x))