ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring

Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:

  arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
  arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-10-krzk@kernel.org

arch/arm/boot/dts/exynos5250-spring.dts

@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
@@ -141,7 +142,7 @@ s5m8767-pmic@66 {
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>;
 
-		clocks {
+		s5m8767_osc: clocks {
 			compatible = "samsung,s5m8767-clk";
 			#clock-cells = <1>;
 			clock-output-names = "en32khz_ap",
@@ -522,6 +523,12 @@ hsic_reset: hsic-reset {
 	};
 };
 
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sd1_bus4 {
 	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };