Commit a2f13890 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

bnx2: Add ack parameter to bnx2_fw_sync().

ack=1 means wait for firmware acknowledgement, and ack=0
means don't wait.  All current callers will set it to 1.

In the next patch, new calls will set ack=0.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7bb0a04f
......@@ -1491,7 +1491,7 @@ bnx2_phy_get_pause_adv(struct bnx2 *bp)
return adv;
}
static int bnx2_fw_sync(struct bnx2 *, u32, int);
static int bnx2_fw_sync(struct bnx2 *, u32, int, int);
static int
bnx2_setup_remote_phy(struct bnx2 *bp, u8 port)
......@@ -1544,7 +1544,7 @@ bnx2_setup_remote_phy(struct bnx2 *bp, u8 port)
bnx2_shmem_wr(bp, BNX2_DRV_MB_ARG0, speed_arg);
spin_unlock_bh(&bp->phy_lock);
bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_CMD_SET_LINK, 0);
bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_CMD_SET_LINK, 1, 0);
spin_lock_bh(&bp->phy_lock);
return 0;
......@@ -2262,7 +2262,7 @@ bnx2_set_phy_loopback(struct bnx2 *bp)
}
static int
bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent)
bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
{
int i;
u32 val;
......@@ -2272,6 +2272,9 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int silent)
bnx2_shmem_wr(bp, BNX2_DRV_MB, msg_data);
if (!ack)
return 0;
/* wait for an acknowledgement. */
for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) {
msleep(10);
......@@ -3610,7 +3613,8 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state)
}
if (!(bp->flags & BNX2_FLAG_NO_WOL))
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 0);
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg,
1, 0);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
......@@ -4309,7 +4313,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
udelay(5);
/* Wait for the firmware to tell us it is ok to issue a reset. */
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1);
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1);
/* Deposit a driver reset signature so the firmware knows that
* this is a soft reset. */
......@@ -4370,7 +4374,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
}
/* Wait for the firmware to finish its initialization. */
rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code, 0);
rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code, 1, 0);
if (rc)
return rc;
......@@ -4596,7 +4600,7 @@ bnx2_init_chip(struct bnx2 *bp)
REG_WR(bp, BNX2_MISC_NEW_CORE_CTL, val);
}
rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
0);
1, 0);
REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, BNX2_MISC_ENABLE_DEFAULT);
REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment