net/mlx5e: Allow to match on ICMP parameters

Support matching on ICMPv4/6 type and code parameters using misc3
section of match parameters.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -1961,6 +1961,10 @@ static int __parse_cls_flower(struct mlx5e_priv *priv,
 				    misc_parameters);
 	void *misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
 				    misc_parameters);
+	void *misc_c_3 = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+				    misc_parameters_3);
+	void *misc_v_3 = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+				    misc_parameters_3);
 	struct flow_rule *rule = flow_cls_offload_flow_rule(f);
 	struct flow_dissector *dissector = rule->match.dissector;
 	u16 addr_type = 0;
@@ -1990,6 +1994,7 @@ static int __parse_cls_flower(struct mlx5e_priv *priv,
 	      BIT(FLOW_DISSECTOR_KEY_CT) |
 	      BIT(FLOW_DISSECTOR_KEY_ENC_IP) |
 	      BIT(FLOW_DISSECTOR_KEY_ENC_OPTS) |
+	      BIT(FLOW_DISSECTOR_KEY_ICMP) |
 	      BIT(FLOW_DISSECTOR_KEY_MPLS))) {
 		NL_SET_ERR_MSG_MOD(extack, "Unsupported key");
 		netdev_dbg(priv->netdev, "Unsupported key used: 0x%x\n",
@@ -2309,7 +2314,49 @@ static int __parse_cls_flower(struct mlx5e_priv *priv,
 		if (match.mask->flags)
 			*match_level = MLX5_MATCH_L4;
 	}
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ICMP)) {
+		struct flow_match_icmp match;
 
+		flow_rule_match_icmp(rule, &match);
+		switch (ip_proto) {
+		case IPPROTO_ICMP:
+			if (!(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) &
+			      MLX5_FLEX_PROTO_ICMP))
+				return -EOPNOTSUPP;
+			MLX5_SET(fte_match_set_misc3, misc_c_3, icmp_type,
+				 match.mask->type);
+			MLX5_SET(fte_match_set_misc3, misc_v_3, icmp_type,
+				 match.key->type);
+			MLX5_SET(fte_match_set_misc3, misc_c_3, icmp_code,
+				 match.mask->code);
+			MLX5_SET(fte_match_set_misc3, misc_v_3, icmp_code,
+				 match.key->code);
+			break;
+		case IPPROTO_ICMPV6:
+			if (!(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) &
+			      MLX5_FLEX_PROTO_ICMPV6))
+				return -EOPNOTSUPP;
+			MLX5_SET(fte_match_set_misc3, misc_c_3, icmpv6_type,
+				 match.mask->type);
+			MLX5_SET(fte_match_set_misc3, misc_v_3, icmpv6_type,
+				 match.key->type);
+			MLX5_SET(fte_match_set_misc3, misc_c_3, icmpv6_code,
+				 match.mask->code);
+			MLX5_SET(fte_match_set_misc3, misc_v_3, icmpv6_code,
+				 match.key->code);
+			break;
+		default:
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Code and type matching only with ICMP and ICMPv6");
+			netdev_err(priv->netdev,
+				   "Code and type matching only with ICMP and ICMPv6\n");
+			return -EINVAL;
+		}
+		if (match.mask->code || match.mask->type) {
+			*match_level = MLX5_MATCH_L4;
+			spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS_3;
+		}
+	}
 	return 0;
 }
 

include/linux/mlx5/device.h

@@ -1142,6 +1142,8 @@ enum mlx5_flex_parser_protos {
 	MLX5_FLEX_PROTO_GENEVE	      = 1 << 3,
 	MLX5_FLEX_PROTO_CW_MPLS_GRE   = 1 << 4,
 	MLX5_FLEX_PROTO_CW_MPLS_UDP   = 1 << 5,
+	MLX5_FLEX_PROTO_ICMP	      = 1 << 8,
+	MLX5_FLEX_PROTO_ICMPV6	      = 1 << 9,
 };
 
 /* MLX5 DEV CAPs */