ARM: dts: st: spear: split interrupts per cells

Each interrupt should be in its own cell.  This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/st/spear1340.dtsi

@@ -63,8 +63,8 @@ i2s-play@b2400000 {
 			compatible = "snps,designware-i2s";
 			reg = <0xb2400000 0x10000>;
 			interrupt-names = "play_irq";
-			interrupts = <0 98 0x4
-				      0 99 0x4>;
+			interrupts = <0 98 0x4>,
+				     <0 99 0x4>;
 			play;
 			channel = <8>;
 			status = "disabled";
@@ -74,8 +74,8 @@ i2s-rec@b2000000 {
 			compatible = "snps,designware-i2s";
 			reg = <0xb2000000 0x10000>;
 			interrupt-names = "record_irq";
-			interrupts = <0 100  0x4
-				      0 101 0x4>;
+			interrupts = <0 100 0x4>,
+				     <0 101 0x4>;
 			record;
 			channel = <8>;
 			status = "disabled";

arch/arm/boot/dts/st/spear13xx.dtsi

@@ -39,8 +39,8 @@ gic: interrupt-controller@ec801000 {
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 6 0x04
-			      0 7 0x04>;
+		interrupts = <0 6 0x04>,
+			     <0 7 0x04>;
 	};
 
 	L2: cache-controller {
@@ -141,10 +141,10 @@ fsmc: flash@b0000000 {
 			       0xb0820000 0x0010	/* NAND Base ADDR */
 			       0xb0810000 0x0010>;	/* NAND Base CMD */
 			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			interrupts = <0 20 0x4
-				      0 21 0x4
-				      0 22 0x4
-				      0 23 0x4>;
+			interrupts = <0 20 0x4>,
+				     <0 21 0x4>,
+				     <0 22 0x4>,
+				     <0 23 0x4>;
 			st,mode = <2>;
 			status = "disabled";
 		};
@@ -152,8 +152,8 @@ fsmc: flash@b0000000 {
 		gmac0: eth@e2000000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe2000000 0x8000>;
-			interrupts = <0 33 0x4
-				      0 34 0x4>;
+			interrupts = <0 33 0x4>,
+				     <0 34 0x4>;
 			interrupt-names = "macirq", "eth_wake_irq";
 			status = "disabled";
 		};
@@ -263,8 +263,8 @@ i2s@e0180000 {
 				compatible = "st,designware-i2s";
 				reg = <0xe0180000 0x1000>;
 				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 10 0x4
-					      0 11 0x4 >;
+				interrupts = <0 10 0x4>,
+					     <0 11 0x4>;
 				status = "disabled";
 			};
 
@@ -272,8 +272,8 @@ i2s@e0200000 {
 				compatible = "st,designware-i2s";
 				reg = <0xe0200000 0x1000>;
 				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 26 0x4
-					      0 53 0x4>;
+				interrupts = <0 26 0x4>,
+					     <0 53 0x4>;
 				status = "disabled";
 			};