vgaarb: Select a default VGA device even if there's no legacy VGA

Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter
never selects it as the default, which means Xorg auto-detection doesn't
work.

VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g.,
[mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are
not configurable by BARs.  Consequently, multiple VGA devices can conflict
with each other.  The VGA arbiter avoids conflicts by ensuring that those
legacy resources are only routed to one VGA device at a time.

The arbiter identifies the "default VGA" device, i.e., a legacy VGA device
that was used by boot firmware.  It selects the first device that:

  - is of PCI_CLASS_DISPLAY_VGA,
  - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and
  - has PCI_BRIDGE_CTL_VGA set in all upstream bridges.

Some systems don't have such a device.  For example, if a host bridge
doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any
devices below it.  Or, as on the HiSilicon D05, the VGA device may be
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the
legacy VGA resources will never reach the device.

This patch extends the arbiter so that if it doesn't find a device that
meets all the above criteria, it selects the first device that:

  - is of PCI_CLASS_DISPLAY_VGA and
  - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled

If it doesn't find even that, it selects the first device that:

  - is of class PCI_CLASS_DISPLAY_VGA.

Such a device may not be able to use the legacy VGA resources, but most
drivers can operate the device without those.  Setting it as the default
device means its "boot_vga" sysfs file will contain "1", which Xorg (via
libpciaccess) uses to help select its default output device.

This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in
particular; see the link below).

It also replaces the powerpc fixup_vga() quirk, albeit with slightly
different semantics: the quirk selected the first VGA device we found, and
overrode that selection with any enabled VGA device we found.  If there
were several enabled VGA devices, the *last* one we found would become the
default.

The code here instead selects the *first* enabled VGA device we find, and
if none are enabled, the first VGA device we find.

Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net
Tested-by: Daniel Axtens <dja@axtens.net>       # arm64, ppc64-qemu-tcg
Tested-by: Zhou Wang <wangzhou1@hisilicon.com>  # D05 Hisi Hip07, Hip08
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013034721.14630.65913.stgit@bhelgaas-glaptop.roam.corp.google.com

arch/powerpc/kernel/pci-common.c

@@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
-
-static void fixup_vga(struct pci_dev *pdev)
-{
-	u16 cmd;
-
-	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-	if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device())
-		vga_set_default_device(pdev);
-
-}
-DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
-			      PCI_CLASS_DISPLAY_VGA, 8, fixup_vga);

drivers/gpu/vga/vgaarb.c

@@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void)
 			vgaarb_info(dev, "no bridge control possible\n");
 	}
 
+	if (!vga_default_device()) {
+		list_for_each_entry(vgadev, &vga_list, list) {
+			struct device *dev = &vgadev->pdev->dev;
+			u16 cmd;
+
+			pdev = vgadev->pdev;
+			pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+			if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+				vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n");
+				vga_set_default_device(pdev);
+				break;
+			}
+		}
+	}
+
+	if (!vga_default_device()) {
+		vgadev = list_first_entry_or_null(&vga_list,
+						  struct vga_device, list);
+		if (vgadev) {
+			struct device *dev = &vgadev->pdev->dev;
+			vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n");
+			vga_set_default_device(vgadev->pdev);
+		}
+	}
+
 	pr_info("loaded\n");
 	return rc;
 }