docs/hw-vuln: Update desc of best effort mode

Moves the description of the best effort mitigation mode to the table of
the possible values in the mds and tsx_async_abort docs, and adds the
same one to the mmio_stale_data doc.
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230901082959.28310-1-itazur@amazon.com

Documentation/admin-guide/hw-vuln/mds.rst

@@ -102,9 +102,19 @@ The possible values in this file are:
      * - 'Vulnerable'
        - The processor is vulnerable, but no mitigation enabled
      * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
-       - The processor is vulnerable but microcode is not updated.
-
-         The mitigation is enabled on a best effort basis. See :ref:`vmwerv`
+       - The processor is vulnerable but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+
+         If the processor is vulnerable but the availability of the microcode
+         based mitigation mechanism is not advertised via CPUID, the kernel
+         selects a best effort mitigation mode. This mode invokes the mitigation
+         instructions without a guarantee that they clear the CPU buffers.
+
+         This is done to address virtualization scenarios where the host has the
+         microcode update applied, but the hypervisor is not yet updated to
+         expose the CPUID to the guest. If the host has updated microcode the
+         protection takes effect; otherwise a few CPU cycles are wasted
+         pointlessly.
      * - 'Mitigation: Clear CPU buffers'
        - The processor is vulnerable and the CPU buffer clearing mitigation is
          enabled.
@@ -119,24 +129,6 @@ to the above information:
     'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
     ========================  ============================================
 
-.. _vmwerv:
-
-Best effort mitigation mode
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-  If the processor is vulnerable, but the availability of the microcode based
-  mitigation mechanism is not advertised via CPUID the kernel selects a best
-  effort mitigation mode.  This mode invokes the mitigation instructions
-  without a guarantee that they clear the CPU buffers.
-
-  This is done to address virtualization scenarios where the host has the
-  microcode update applied, but the hypervisor is not yet updated to expose
-  the CPUID to the guest. If the host has updated microcode the protection
-  takes effect otherwise a few cpu cycles are wasted pointlessly.
-
-  The state in the mds sysfs file reflects this situation accordingly.
-
-
 Mitigation mechanism
 -------------------------
 

Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst

@@ -225,8 +225,19 @@ The possible values in this file are:
      * - 'Vulnerable'
        - The processor is vulnerable, but no mitigation enabled
      * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
-       - The processor is vulnerable, but microcode is not updated. The
+       - The processor is vulnerable but microcode is not updated. The
          mitigation is enabled on a best effort basis.
+
+         If the processor is vulnerable but the availability of the microcode
+         based mitigation mechanism is not advertised via CPUID, the kernel
+         selects a best effort mitigation mode. This mode invokes the mitigation
+         instructions without a guarantee that they clear the CPU buffers.
+
+         This is done to address virtualization scenarios where the host has the
+         microcode update applied, but the hypervisor is not yet updated to
+         expose the CPUID to the guest. If the host has updated microcode the
+         protection takes effect; otherwise a few CPU cycles are wasted
+         pointlessly.
      * - 'Mitigation: Clear CPU buffers'
        - The processor is vulnerable and the CPU buffer clearing mitigation is
          enabled.

Documentation/admin-guide/hw-vuln/tsx_async_abort.rst

@@ -98,7 +98,19 @@ The possible values in this file are:
    * - 'Vulnerable'
      - The CPU is affected by this vulnerability and the microcode and kernel mitigation are not applied.
    * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
-     - The system tries to clear the buffers but the microcode might not support the operation.
+     - The processor is vulnerable but microcode is not updated. The
+       mitigation is enabled on a best effort basis.
+
+       If the processor is vulnerable but the availability of the microcode
+       based mitigation mechanism is not advertised via CPUID, the kernel
+       selects a best effort mitigation mode. This mode invokes the mitigation
+       instructions without a guarantee that they clear the CPU buffers.
+
+       This is done to address virtualization scenarios where the host has the
+       microcode update applied, but the hypervisor is not yet updated to
+       expose the CPUID to the guest. If the host has updated microcode the
+       protection takes effect; otherwise a few CPU cycles are wasted
+       pointlessly.
    * - 'Mitigation: Clear CPU buffers'
      - The microcode has been updated to clear the buffers. TSX is still enabled.
    * - 'Mitigation: TSX disabled'
@@ -106,25 +118,6 @@ The possible values in this file are:
    * - 'Not affected'
      - The CPU is not affected by this issue.
 
-.. _ucode_needed:
-
-Best effort mitigation mode
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-If the processor is vulnerable, but the availability of the microcode-based
-mitigation mechanism is not advertised via CPUID the kernel selects a best
-effort mitigation mode.  This mode invokes the mitigation instructions
-without a guarantee that they clear the CPU buffers.
-
-This is done to address virtualization scenarios where the host has the
-microcode update applied, but the hypervisor is not yet updated to expose the
-CPUID to the guest. If the host has updated microcode the protection takes
-effect; otherwise a few CPU cycles are wasted pointlessly.
-
-The state in the tsx_async_abort sysfs file reflects this situation
-accordingly.
-
-
 Mitigation mechanism
 --------------------