drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code

Include DPLL0 in the managed dplls for SKL/KBL. While it has to be kept
enabled because of it driving CDCLK, it is better to special case that
inside the DPLL code than in the higher level.

v2: Use INTEL_DPLL_ALWAYS_ON flag. (Ander)

v3: Remove extremely paranoid WARN_ONs. (Maarten)
    Handle DPLL0 in skylake_get_ddi_pll() properly. (Ander)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-14-git-send-email-ander.conselvan.de.oliveira@intel.com

drivers/gpu/drm/i915/intel_ddi.c

@@ -1008,9 +1008,6 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
 {
 	struct intel_shared_dpll *pll;
 
-	if (intel_encoder->type == INTEL_OUTPUT_EDP)
-		return true;
-
 	pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder);
 	if (pll == NULL) {
 		DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
@@ -1570,24 +1567,6 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,
 		uint32_t dpll = pipe_config->ddi_pll_sel;
 		uint32_t val;
 
-		/*
-		 * DPLL0 is used for eDP and is the only "private" DPLL (as
-		 * opposed to shared) on SKL
-		 */
-		if (encoder->type == INTEL_OUTPUT_EDP) {
-			WARN_ON(dpll != SKL_DPLL0);
-
-			val = I915_READ(DPLL_CTRL1);
-
-			val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) |
-				 DPLL_CTRL1_SSC(dpll) |
-				 DPLL_CTRL1_LINK_RATE_MASK(dpll));
-			val |= pipe_config->dpll_hw_state.ctrl1 << (dpll * 6);
-
-			I915_WRITE(DPLL_CTRL1, val);
-			POSTING_READ(DPLL_CTRL1);
-		}
-
 		/* DDI -> PLL mapping  */
 		val = I915_READ(DPLL_CTRL2);
 

drivers/gpu/drm/i915/intel_display.c

@@ -9771,21 +9771,15 @@ static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
 				struct intel_crtc_state *pipe_config)
 {
 	enum intel_dpll_id id;
-	u32 temp, dpll_ctl1;
+	u32 temp;
 
 	temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
 	pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
 
 	switch (pipe_config->ddi_pll_sel) {
 	case SKL_DPLL0:
-		/*
-		 * On SKL the eDP DPLL (DPLL0 as we don't use SSC) is not part
-		 * of the shared DPLL framework and thus needs to be read out
-		 * separately
-		 */
-		dpll_ctl1 = I915_READ(DPLL_CTRL1);
-		pipe_config->dpll_hw_state.ctrl1 = dpll_ctl1 & 0x3f;
-		return;
+		id = DPLL_ID_SKL_DPLL0;
+		break;
 	case SKL_DPLL1:
 		id = DPLL_ID_SKL_DPLL1;
 		break;

drivers/gpu/drm/i915/intel_dp.c

@@ -1237,52 +1237,6 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
 	intel_connector_unregister(intel_connector);
 }
 
-static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
-{
-	u32 ctrl1;
-
-	memset(&pipe_config->dpll_hw_state, 0,
-	       sizeof(pipe_config->dpll_hw_state));
-
-	pipe_config->ddi_pll_sel = SKL_DPLL0;
-	pipe_config->dpll_hw_state.cfgcr1 = 0;
-	pipe_config->dpll_hw_state.cfgcr2 = 0;
-
-	ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
-	switch (pipe_config->port_clock / 2) {
-	case 81000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
-					      SKL_DPLL0);
-		break;
-	case 135000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350,
-					      SKL_DPLL0);
-		break;
-	case 270000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700,
-					      SKL_DPLL0);
-		break;
-	case 162000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620,
-					      SKL_DPLL0);
-		break;
-	/* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
-	results in CDCLK change. Need to handle the change of CDCLK by
-	disabling pipes and re-enabling them */
-	case 108000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
-					      SKL_DPLL0);
-		break;
-	case 216000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160,
-					      SKL_DPLL0);
-		break;
-
-	}
-	pipe_config->dpll_hw_state.ctrl1 = ctrl1;
-}
-
 static int
 intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
 {
@@ -1640,11 +1594,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 				&pipe_config->dp_m2_n2);
 	}
 
-	if ((IS_SKYLAKE(dev)  || IS_KABYLAKE(dev)) && is_edp(intel_dp))
-		skl_edp_set_pll_config(pipe_config);
-	else if (IS_BROXTON(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev))
-		/* handled in ddi */;
-	else
+	if (!HAS_DDI(dev))
 		intel_dp_set_clock(encoder, pipe_config);
 
 	return true;

drivers/gpu/drm/i915/intel_dpll_mgr.c

@@ -785,7 +785,12 @@ struct skl_dpll_regs {
 };
 
 /* this array is indexed by the *shared* pll id */
-static const struct skl_dpll_regs skl_dpll_regs[3] = {
+static const struct skl_dpll_regs skl_dpll_regs[4] = {
+	{
+		/* DPLL 0 */
+		.ctl = LCPLL1_CTL,
+		/* DPLL 0 doesn't support HDMI mode */
+	},
 	{
 		/* DPLL 1 */
 		.ctl = LCPLL2_CTL,
@@ -806,24 +811,27 @@ static const struct skl_dpll_regs skl_dpll_regs[3] = {
 	},
 };
 
-static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
-			       struct intel_shared_dpll *pll)
+static void skl_ddi_pll_write_ctrl1(struct drm_i915_private *dev_priv,
+				    struct intel_shared_dpll *pll)
 {
 	uint32_t val;
-	unsigned int dpll;
-	const struct skl_dpll_regs *regs = skl_dpll_regs;
-
-	/* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */
-	dpll = pll->id + 1;
 
 	val = I915_READ(DPLL_CTRL1);
 
-	val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | DPLL_CTRL1_SSC(dpll) |
-		 DPLL_CTRL1_LINK_RATE_MASK(dpll));
-	val |= pll->config.hw_state.ctrl1 << (dpll * 6);
+	val &= ~(DPLL_CTRL1_HDMI_MODE(pll->id) | DPLL_CTRL1_SSC(pll->id) |
+		 DPLL_CTRL1_LINK_RATE_MASK(pll->id));
+	val |= pll->config.hw_state.ctrl1 << (pll->id * 6);
 
 	I915_WRITE(DPLL_CTRL1, val);
 	POSTING_READ(DPLL_CTRL1);
+}
+
+static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
+			       struct intel_shared_dpll *pll)
+{
+	const struct skl_dpll_regs *regs = skl_dpll_regs;
+
+	skl_ddi_pll_write_ctrl1(dev_priv, pll);
 
 	I915_WRITE(regs[pll->id].cfgcr1, pll->config.hw_state.cfgcr1);
 	I915_WRITE(regs[pll->id].cfgcr2, pll->config.hw_state.cfgcr2);
@@ -834,8 +842,14 @@ static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv,
 	I915_WRITE(regs[pll->id].ctl,
 		   I915_READ(regs[pll->id].ctl) | LCPLL_PLL_ENABLE);
 
-	if (wait_for(I915_READ(DPLL_STATUS) & DPLL_LOCK(dpll), 5))
-		DRM_ERROR("DPLL %d not locked\n", dpll);
+	if (wait_for(I915_READ(DPLL_STATUS) & DPLL_LOCK(pll->id), 5))
+		DRM_ERROR("DPLL %d not locked\n", pll->id);
+}
+
+static void skl_ddi_dpll0_enable(struct drm_i915_private *dev_priv,
+				 struct intel_shared_dpll *pll)
+{
+	skl_ddi_pll_write_ctrl1(dev_priv, pll);
 }
 
 static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv,
@@ -849,12 +863,16 @@ static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv,
 	POSTING_READ(regs[pll->id].ctl);
 }
 
+static void skl_ddi_dpll0_disable(struct drm_i915_private *dev_priv,
+				  struct intel_shared_dpll *pll)
+{
+}
+
 static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 				     struct intel_shared_dpll *pll,
 				     struct intel_dpll_hw_state *hw_state)
 {
 	uint32_t val;
-	unsigned int dpll;
 	const struct skl_dpll_regs *regs = skl_dpll_regs;
 	bool ret;
 
@@ -863,18 +881,15 @@ static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 
 	ret = false;
 
-	/* DPLL0 is not part of the shared DPLLs, so pll->id is 0 for DPLL1 */
-	dpll = pll->id + 1;
-
 	val = I915_READ(regs[pll->id].ctl);
 	if (!(val & LCPLL_PLL_ENABLE))
 		goto out;
 
 	val = I915_READ(DPLL_CTRL1);
-	hw_state->ctrl1 = (val >> (dpll * 6)) & 0x3f;
+	hw_state->ctrl1 = (val >> (pll->id * 6)) & 0x3f;
 
 	/* avoid reading back stale values if HDMI mode is not enabled */
-	if (val & DPLL_CTRL1_HDMI_MODE(dpll)) {
+	if (val & DPLL_CTRL1_HDMI_MODE(pll->id)) {
 		hw_state->cfgcr1 = I915_READ(regs[pll->id].cfgcr1);
 		hw_state->cfgcr2 = I915_READ(regs[pll->id].cfgcr2);
 	}
@@ -886,6 +901,35 @@ static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
+static bool skl_ddi_dpll0_get_hw_state(struct drm_i915_private *dev_priv,
+				       struct intel_shared_dpll *pll,
+				       struct intel_dpll_hw_state *hw_state)
+{
+	uint32_t val;
+	const struct skl_dpll_regs *regs = skl_dpll_regs;
+	bool ret;
+
+	if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS))
+		return false;
+
+	ret = false;
+
+	/* DPLL0 is always enabled since it drives CDCLK */
+	val = I915_READ(regs[pll->id].ctl);
+	if (WARN_ON(!(val & LCPLL_PLL_ENABLE)))
+		goto out;
+
+	val = I915_READ(DPLL_CTRL1);
+	hw_state->ctrl1 = (val >> (pll->id * 6)) & 0x3f;
+
+	ret = true;
+
+out:
+	intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
+
+	return ret;
+}
+
 struct skl_wrpll_context {
 	uint64_t min_deviation;		/* current minimal deviation */
 	uint64_t central_freq;		/* chosen central freq */
@@ -1165,7 +1209,8 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
 			 DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
 			 wrpll_params.central_freq;
 	} else if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
-		   encoder->type == INTEL_OUTPUT_DP_MST) {
+		   encoder->type == INTEL_OUTPUT_DP_MST ||
+		   encoder->type == INTEL_OUTPUT_EDP) {
 		switch (crtc_state->port_clock / 2) {
 		case 81000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
@@ -1176,6 +1221,19 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
 		case 270000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
 			break;
+		/* eDP 1.4 rates */
+		case 162000:
+			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, 0);
+			break;
+		/* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
+		results in CDCLK change. Need to handle the change of CDCLK by
+		disabling pipes and re-enabling them */
+		case 108000:
+			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, 0);
+			break;
+		case 216000:
+			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, 0);
+			break;
 		}
 
 		cfgcr1 = cfgcr2 = 0;
@@ -1190,13 +1248,18 @@ skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
 	crtc_state->dpll_hw_state.cfgcr1 = cfgcr1;
 	crtc_state->dpll_hw_state.cfgcr2 = cfgcr2;
 
-	pll = intel_find_shared_dpll(crtc, crtc_state,
-				     DPLL_ID_SKL_DPLL1, DPLL_ID_SKL_DPLL3);
+	if (encoder->type == INTEL_OUTPUT_EDP)
+		pll = intel_find_shared_dpll(crtc, crtc_state,
+					     DPLL_ID_SKL_DPLL0,
+					     DPLL_ID_SKL_DPLL0);
+	else
+		pll = intel_find_shared_dpll(crtc, crtc_state,
+					     DPLL_ID_SKL_DPLL1,
+					     DPLL_ID_SKL_DPLL3);
 	if (!pll)
 		return NULL;
 
-	/* shared DPLL id 0 is DPLL 1 */
-	crtc_state->ddi_pll_sel = pll->id + 1;
+	crtc_state->ddi_pll_sel = pll->id;
 
 	intel_reference_shared_dpll(pll, crtc_state);
 
@@ -1209,6 +1272,12 @@ static const struct intel_shared_dpll_funcs skl_ddi_pll_funcs = {
 	.get_hw_state = skl_ddi_pll_get_hw_state,
 };
 
+static const struct intel_shared_dpll_funcs skl_ddi_dpll0_funcs = {
+	.enable = skl_ddi_dpll0_enable,
+	.disable = skl_ddi_dpll0_disable,
+	.get_hw_state = skl_ddi_dpll0_get_hw_state,
+};
+
 static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
 				struct intel_shared_dpll *pll)
 {
@@ -1624,9 +1693,10 @@ static const struct intel_dpll_mgr hsw_pll_mgr = {
 };
 
 static const struct dpll_info skl_plls[] = {
-	{ "DPPL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs, 0 },
-	{ "DPPL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs, 0 },
-	{ "DPPL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs, 0 },
+	{ "DPLL 0", DPLL_ID_SKL_DPLL0, &skl_ddi_dpll0_funcs, INTEL_DPLL_ALWAYS_ON },
+	{ "DPPL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs,   0 },
+	{ "DPPL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs,   0 },
+	{ "DPPL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs,   0 },
 	{ NULL, -1, NULL, },
 };
 

drivers/gpu/drm/i915/intel_dpll_mgr.h

@@ -54,9 +54,10 @@ enum intel_dpll_id {
 	DPLL_ID_LCPLL_2700 = 5,
 
 	/* skl */
-	DPLL_ID_SKL_DPLL1 = 0,
-	DPLL_ID_SKL_DPLL2 = 1,
-	DPLL_ID_SKL_DPLL3 = 2,
+	DPLL_ID_SKL_DPLL0 = 0,
+	DPLL_ID_SKL_DPLL1 = 1,
+	DPLL_ID_SKL_DPLL2 = 2,
+	DPLL_ID_SKL_DPLL3 = 3,
 };
 #define I915_NUM_PLLS 6