Merge branch 'ethtool-eeprom'

Ido Schimmel says:

====================
ethtool: Module EEPROM API improvements

This patchset contains various improvements to recently introduced
module EEPROM netlink API. Noticed these while adding module EEPROM
write support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/ethtool-netlink.rst

@@ -1363,8 +1363,8 @@ in an implementation specific way.
 ``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP
 module parameters. This does not mean autonegotiation.
 
-MODULE_EEPROM
-=============
+MODULE_EEPROM_GET
+=================
 
 Fetch module EEPROM data dump.
 This interface is designed to allow dumps of at most 1/2 page at once. This
@@ -1383,12 +1383,14 @@ Request contents:
   ``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS``  u8      page I2C address
   =======================================  ======  ==========================
 
+If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed.
+
 Kernel response contents:
 
  +---------------------------------------------+--------+---------------------+
  | ``ETHTOOL_A_MODULE_EEPROM_HEADER``          | nested | reply header        |
  +---------------------------------------------+--------+---------------------+
- | ``ETHTOOL_A_MODULE_EEPROM_DATA``            | nested | array of bytes from |
+ | ``ETHTOOL_A_MODULE_EEPROM_DATA``            | binary | array of bytes from |
  |                                             |        | module EEPROM       |
  +---------------------------------------------+--------+---------------------+
 

include/linux/ethtool.h

@@ -401,12 +401,12 @@ struct ethtool_rmon_stats {
  * required information to the driver.
  */
 struct ethtool_module_eeprom {
-	__u32	offset;
-	__u32	length;
-	__u8	page;
-	__u8	bank;
-	__u8	i2c_address;
-	__u8	*data;
+	u32	offset;
+	u32	length;
+	u8	page;
+	u8	bank;
+	u8	i2c_address;
+	u8	*data;
 };
 
 /**

include/uapi/linux/ethtool_netlink.h

@@ -675,7 +675,7 @@ enum {
 	ETHTOOL_A_MODULE_EEPROM_PAGE,			/* u8 */
 	ETHTOOL_A_MODULE_EEPROM_BANK,			/* u8 */
 	ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS,		/* u8 */
-	ETHTOOL_A_MODULE_EEPROM_DATA,			/* nested */
+	ETHTOOL_A_MODULE_EEPROM_DATA,			/* binary */
 
 	__ETHTOOL_A_MODULE_EEPROM_CNT,
 	ETHTOOL_A_MODULE_EEPROM_MAX = (__ETHTOOL_A_MODULE_EEPROM_CNT - 1)

net/ethtool/eeprom.c

@@ -159,9 +159,6 @@ static int eeprom_parse_request(struct ethnl_req_info *req_info, struct nlattr *
 	request->offset = nla_get_u32(tb[ETHTOOL_A_MODULE_EEPROM_OFFSET]);
 	request->length = nla_get_u32(tb[ETHTOOL_A_MODULE_EEPROM_LENGTH]);
 
-	if (!request->length)
-		return -EINVAL;
-
 	/* The following set of conditions limit the API to only dump 1/2
 	 * EEPROM page without crossing low page boundary located at offset 128.
 	 * This means user may only request dumps of length limited to 128 from
@@ -180,10 +177,6 @@ static int eeprom_parse_request(struct ethnl_req_info *req_info, struct nlattr *
 		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_LENGTH],
 				    "reading cross half page boundary is illegal");
 		return -EINVAL;
-	} else if (request->offset >= ETH_MODULE_EEPROM_PAGE_LEN * 2) {
-		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_OFFSET],
-				    "offset is out of bounds");
-		return -EINVAL;
 	} else if (request->offset + request->length > ETH_MODULE_EEPROM_PAGE_LEN * 2) {
 		NL_SET_ERR_MSG_ATTR(extack, tb[ETHTOOL_A_MODULE_EEPROM_LENGTH],
 				    "reading cross page boundary is illegal");
@@ -236,8 +229,10 @@ const struct ethnl_request_ops ethnl_module_eeprom_request_ops = {
 
 const struct nla_policy ethnl_module_eeprom_get_policy[] = {
 	[ETHTOOL_A_MODULE_EEPROM_HEADER]	= NLA_POLICY_NESTED(ethnl_header_policy),
-	[ETHTOOL_A_MODULE_EEPROM_OFFSET]	= { .type = NLA_U32 },
-	[ETHTOOL_A_MODULE_EEPROM_LENGTH]	= { .type = NLA_U32 },
+	[ETHTOOL_A_MODULE_EEPROM_OFFSET]	=
+		NLA_POLICY_MAX(NLA_U32, ETH_MODULE_EEPROM_PAGE_LEN * 2 - 1),
+	[ETHTOOL_A_MODULE_EEPROM_LENGTH]	=
+		NLA_POLICY_RANGE(NLA_U32, 1, ETH_MODULE_EEPROM_PAGE_LEN),
 	[ETHTOOL_A_MODULE_EEPROM_PAGE]		= { .type = NLA_U8 },
 	[ETHTOOL_A_MODULE_EEPROM_BANK]		= { .type = NLA_U8 },
 	[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS]	=

net/ethtool/netlink.h

@@ -380,7 +380,7 @@ extern const struct nla_policy ethnl_cable_test_tdr_act_policy[ETHTOOL_A_CABLE_T
 extern const struct nla_policy ethnl_tunnel_info_get_policy[ETHTOOL_A_TUNNEL_INFO_HEADER + 1];
 extern const struct nla_policy ethnl_fec_get_policy[ETHTOOL_A_FEC_HEADER + 1];
 extern const struct nla_policy ethnl_fec_set_policy[ETHTOOL_A_FEC_AUTO + 1];
-extern const struct nla_policy ethnl_module_eeprom_get_policy[ETHTOOL_A_MODULE_EEPROM_DATA + 1];
+extern const struct nla_policy ethnl_module_eeprom_get_policy[ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS + 1];
 extern const struct nla_policy ethnl_stats_get_policy[ETHTOOL_A_STATS_GROUPS + 1];
 
 int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);