Commit a4e92ce8 authored by Mahesh Salgaonkar's avatar Mahesh Salgaonkar Committed by Michael Ellerman

powerpc/fadump: Reservationless firmware assisted dump

One of the primary issues with Firmware Assisted Dump (fadump) on Power
is that it needs a large amount of memory to be reserved. On large
systems with TeraBytes of memory, this reservation can be quite
significant.

In some cases, fadump fails if the memory reserved is insufficient, or
if the reserved memory was DLPAR hot-removed.

In the normal case, post reboot, the preserved memory is filtered to
extract only relevant areas of interest using the makedumpfile tool.
While the tool provides flexibility to determine what needs to be part
of the dump and what memory to filter out, all supported distributions
default this to "Capture only kernel data and nothing else".

We take advantage of this default and the Linux kernel's Contiguous
Memory Allocator (CMA) to fundamentally change the memory reservation
model for fadump.

Instead of setting aside a significant chunk of memory nobody can use,
this patch uses CMA instead, to reserve a significant chunk of memory
that the kernel is prevented from using (due to MIGRATE_CMA), but
applications are free to use it. With this fadump will still be able
to capture all of the kernel memory and most of the user space memory
except the user pages that were present in CMA region.

Essentially, on a P9 LPAR with 2 cores, 8GB RAM and current upstream:
[root@zzxx-yy10 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           7557         193        6822          12         541        6725
Swap:          4095           0        4095

With this patch:
[root@zzxx-yy10 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           8133         194        7464          12         475        7338
Swap:          4095           0        4095

Changes made here are completely transparent to how fadump has
traditionally worked.

Thanks to Aneesh Kumar and Anshuman Khandual for helping us understand
CMA and its usage.

TODO:
- Handle case where CMA reservation spans nodes.
Signed-off-by: default avatarAnanth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: default avatarHari Bathini <hbathini@linux.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 08fb726d
......@@ -113,7 +113,15 @@ header, is usually reserved at an offset greater than boot memory
size (see Fig. 1). This area is *not* released: this region will
be kept permanently reserved, so that it can act as a receptacle
for a copy of the boot memory content in addition to CPU state
and HPTE region, in the case a crash does occur.
and HPTE region, in the case a crash does occur. Since this reserved
memory area is used only after the system crash, there is no point in
blocking this significant chunk of memory from production kernel.
Hence, the implementation uses the Linux kernel's Contiguous Memory
Allocator (CMA) for memory reservation if CMA is configured for kernel.
With CMA reservation this memory will be available for applications to
use it, while kernel is prevented from using it. With this fadump will
still be able to capture all of the kernel memory and most of the user
space memory except the user pages that were present in CMA region.
o Memory Reservation during first kernel
......@@ -162,6 +170,9 @@ How to enable firmware-assisted dump (fadump):
1. Set config option CONFIG_FA_DUMP=y and build kernel.
2. Boot into linux kernel with 'fadump=on' kernel cmdline option.
By default, fadump reserved memory will be initialized as CMA area.
Alternatively, user can boot linux kernel with 'fadump=nocma' to
prevent fadump to use CMA.
3. Optionally, user can also set 'crashkernel=' kernel cmdline
to specify size of the memory to reserve for boot memory dump
preservation.
......@@ -172,6 +183,10 @@ NOTE: 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
2. If firmware-assisted dump fails to reserve memory then it
will fallback to existing kdump mechanism if 'crashkernel='
option is set at kernel cmdline.
3. if user wants to capture all of user space memory and ok with
reserved memory not available to production system, then
'fadump=nocma' kernel parameter can be used to fallback to
old behaviour.
Sysfs/debugfs files:
------------
......
......@@ -48,6 +48,10 @@
#define memblock_num_regions(memblock_type) (memblock.memblock_type.cnt)
/* Alignement per CMA requirement. */
#define FADUMP_CMA_ALIGNMENT (PAGE_SIZE << \
max_t(unsigned long, MAX_ORDER - 1, pageblock_order))
/* Firmware provided dump sections */
#define FADUMP_CPU_STATE_DATA 0x0001
#define FADUMP_HPTE_REGION 0x0002
......@@ -141,6 +145,7 @@ struct fw_dump {
unsigned long fadump_supported:1;
unsigned long dump_active:1;
unsigned long dump_registered:1;
unsigned long nocma:1;
};
/*
......
......@@ -35,6 +35,7 @@
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
#include <linux/cma.h>
#include <asm/debugfs.h>
#include <asm/page.h>
......@@ -46,6 +47,9 @@
static struct fw_dump fw_dump;
static struct fadump_mem_struct fdm;
static const struct fadump_mem_struct *fdm_active;
#ifdef CONFIG_CMA
static struct cma *fadump_cma;
#endif
static DEFINE_MUTEX(fadump_mutex);
struct fad_crash_memory_ranges *crash_memory_ranges;
......@@ -53,6 +57,67 @@ int crash_memory_ranges_size;
int crash_mem_ranges;
int max_crash_mem_ranges;
#ifdef CONFIG_CMA
/*
* fadump_cma_init() - Initialize CMA area from a fadump reserved memory
*
* This function initializes CMA area from fadump reserved memory.
* The total size of fadump reserved memory covers for boot memory size
* + cpu data size + hpte size and metadata.
* Initialize only the area equivalent to boot memory size for CMA use.
* The reamining portion of fadump reserved memory will be not given
* to CMA and pages for thoes will stay reserved. boot memory size is
* aligned per CMA requirement to satisy cma_init_reserved_mem() call.
* But for some reason even if it fails we still have the memory reservation
* with us and we can still continue doing fadump.
*/
int __init fadump_cma_init(void)
{
unsigned long long base, size;
int rc;
if (!fw_dump.fadump_enabled)
return 0;
/*
* Do not use CMA if user has provided fadump=nocma kernel parameter.
* Return 1 to continue with fadump old behaviour.
*/
if (fw_dump.nocma)
return 1;
base = fw_dump.reserve_dump_area_start;
size = fw_dump.boot_memory_size;
if (!size)
return 0;
rc = cma_init_reserved_mem(base, size, 0, "fadump_cma", &fadump_cma);
if (rc) {
pr_err("Failed to init cma area for firmware-assisted dump,%d\n", rc);
/*
* Though the CMA init has failed we still have memory
* reservation with us. The reserved memory will be
* blocked from production system usage. Hence return 1,
* so that we can continue with fadump.
*/
return 1;
}
/*
* So we now have successfully initialized cma area for fadump.
*/
pr_info("Initialized 0x%lx bytes cma area at %ldMB from 0x%lx "
"bytes of memory reserved for firmware-assisted dump\n",
cma_get_size(fadump_cma),
(unsigned long)cma_get_base(fadump_cma) >> 20,
fw_dump.reserve_dump_area_size);
return 1;
}
#else
static int __init fadump_cma_init(void) { return 1; }
#endif /* CONFIG_CMA */
/* Scan the Firmware Assisted dump configuration details. */
int __init early_init_dt_scan_fw_dump(unsigned long node,
const char *uname, int depth, void *data)
......@@ -378,8 +443,15 @@ int __init fadump_reserve_mem(void)
*/
if (fdm_active)
fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
else {
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
#ifdef CONFIG_CMA
if (!fw_dump.nocma)
fw_dump.boot_memory_size =
ALIGN(fw_dump.boot_memory_size,
FADUMP_CMA_ALIGNMENT);
#endif
}
/*
* Calculate the memory boundary.
......@@ -426,8 +498,9 @@ int __init fadump_reserve_mem(void)
fw_dump.fadumphdr_addr =
be64_to_cpu(fdm_active->rmr_region.destination_address) +
be64_to_cpu(fdm_active->rmr_region.source_len);
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
pr_debug("fadumphdr_addr = %pa\n", &fw_dump.fadumphdr_addr);
fw_dump.reserve_dump_area_start = base;
fw_dump.reserve_dump_area_size = size;
} else {
size = get_fadump_area_size();
......@@ -455,10 +528,11 @@ int __init fadump_reserve_mem(void)
(unsigned long)(size >> 20),
(unsigned long)(base >> 20),
(unsigned long)(memblock_phys_mem_size() >> 20));
}
fw_dump.reserve_dump_area_start = base;
fw_dump.reserve_dump_area_size = size;
fw_dump.reserve_dump_area_start = base;
fw_dump.reserve_dump_area_size = size;
return fadump_cma_init();
}
return 1;
}
......@@ -477,6 +551,10 @@ static int __init early_fadump_param(char *p)
fw_dump.fadump_enabled = 1;
else if (strncmp(p, "off", 3) == 0)
fw_dump.fadump_enabled = 0;
else if (strncmp(p, "nocma", 5) == 0) {
fw_dump.fadump_enabled = 1;
fw_dump.nocma = 1;
}
return 0;
}
......@@ -1229,7 +1307,7 @@ static int fadump_unregister_dump(struct fadump_mem_struct *fdm)
return 0;
}
static int fadump_invalidate_dump(struct fadump_mem_struct *fdm)
static int fadump_invalidate_dump(const struct fadump_mem_struct *fdm)
{
int rc = 0;
unsigned int wait_time;
......@@ -1260,9 +1338,8 @@ void fadump_cleanup(void)
{
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
/* pass the same memory dump structure provided by platform */
fadump_invalidate_dump(fdm_active);
} else if (fw_dump.dump_registered) {
/* Un-register Firmware-assisted dump if it was registered. */
fadump_unregister_dump(&fdm);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment