Commit a5119818 authored by Tobias Schramm's avatar Tobias Schramm Committed by Sam Ravnborg

drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simple

This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple
driver. The panel is used by the pine64 Pinebook Pro.
Signed-off-by: default avatarTobias Schramm <t.schramm@manjaro.org>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109112952.2620-2-t.schramm@manjaro.org
parent 4cee2f8e
...@@ -1037,6 +1037,38 @@ static const struct panel_desc boe_nv101wxmn51 = { ...@@ -1037,6 +1037,38 @@ static const struct panel_desc boe_nv101wxmn51 = {
}, },
}; };
static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
{
.clock = 148500,
.hdisplay = 1920,
.hsync_start = 1920 + 48,
.hsync_end = 1920 + 48 + 32,
.htotal = 2200,
.vdisplay = 1080,
.vsync_start = 1080 + 3,
.vsync_end = 1080 + 3 + 5,
.vtotal = 1125,
.vrefresh = 60,
},
};
static const struct panel_desc boe_nv140fhmn49 = {
.modes = boe_nv140fhmn49_modes,
.num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes),
.bpc = 6,
.size = {
.width = 309,
.height = 174,
},
.delay = {
.prepare = 210,
.enable = 50,
.unprepare = 160,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.connector_type = DRM_MODE_CONNECTOR_eDP,
};
static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = { static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = {
.clock = 9000, .clock = 9000,
.hdisplay = 480, .hdisplay = 480,
...@@ -3199,6 +3231,9 @@ static const struct of_device_id platform_of_match[] = { ...@@ -3199,6 +3231,9 @@ static const struct of_device_id platform_of_match[] = {
}, { }, {
.compatible = "boe,nv101wxmn51", .compatible = "boe,nv101wxmn51",
.data = &boe_nv101wxmn51, .data = &boe_nv101wxmn51,
}, {
.compatible = "boe,nv140fhmn49",
.data = &boe_nv140fhmn49,
}, { }, {
.compatible = "cdtech,s043wq26h-ct7", .compatible = "cdtech,s043wq26h-ct7",
.data = &cdtech_s043wq26h_ct7, .data = &cdtech_s043wq26h_ct7,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment