Commit a54769f5 authored by Sathya Perla's avatar Sathya Perla Committed by David S. Miller

be2net: add vlan/rx-mode/flow-control config to be_setup()

When a card is reset due to EEH error recovery or due to a suspend,
rx-mode config (promisc/mc) is not being sent to the FW. be_setup() is
called in these flows and is the best place for such config/re-config
cmds. Hence include rx-mode, vlan and flow-control config in
be_setup().
Signed-off-by: default avatarSathya Perla <sathya.perla@emulex.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 859c2012
......@@ -796,7 +796,7 @@ static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
be_vid_config(adapter, false, 0);
}
static void be_set_multicast_list(struct net_device *netdev)
static void be_set_rx_mode(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
......@@ -2352,17 +2352,6 @@ static int be_open(struct net_device *netdev)
/* Now that interrupts are on we can process async mcc */
be_async_mcc_enable(adapter);
if (be_physfn(adapter)) {
status = be_vid_config(adapter, false, 0);
if (status)
goto err;
status = be_cmd_set_flow_control(adapter,
adapter->tx_fc, adapter->rx_fc);
if (status)
goto err;
}
return 0;
err:
be_close(adapter->netdev);
......@@ -2450,10 +2439,40 @@ static inline void be_vf_eth_addr_rem(struct be_adapter *adapter)
}
}
static int be_clear(struct be_adapter *adapter)
{
int vf;
if (be_physfn(adapter) && adapter->sriov_enabled)
be_vf_eth_addr_rem(adapter);
be_mcc_queues_destroy(adapter);
be_rx_queues_destroy(adapter);
be_tx_queues_destroy(adapter);
adapter->eq_next_idx = 0;
if (be_physfn(adapter) && adapter->sriov_enabled)
for (vf = 0; vf < num_vfs; vf++)
if (adapter->vf_cfg[vf].vf_if_handle)
be_cmd_if_destroy(adapter,
adapter->vf_cfg[vf].vf_if_handle,
vf + 1);
be_cmd_if_destroy(adapter, adapter->if_handle, 0);
adapter->be3_native = false;
adapter->promiscuous = false;
/* tell fw we're done with firing cmds */
be_cmd_fw_clean(adapter);
return 0;
}
static int be_setup(struct be_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
u32 cap_flags, en_flags, vf = 0;
u32 tx_fc, rx_fc;
int status;
u8 mac[ETH_ALEN];
......@@ -2479,7 +2498,7 @@ static int be_setup(struct be_adapter *adapter)
netdev->dev_addr, false/* pmac_invalid */,
&adapter->if_handle, &adapter->pmac_id, 0);
if (status != 0)
goto do_none;
goto err;
if (be_physfn(adapter)) {
if (adapter->sriov_enabled) {
......@@ -2494,7 +2513,7 @@ static int be_setup(struct be_adapter *adapter)
dev_err(&adapter->pdev->dev,
"Interface Create failed for VF %d\n",
vf);
goto if_destroy;
goto err;
}
adapter->vf_cfg[vf].vf_pmac_id =
BE_INVALID_PMAC_ID;
......@@ -2512,70 +2531,46 @@ static int be_setup(struct be_adapter *adapter)
status = be_tx_queues_create(adapter);
if (status != 0)
goto if_destroy;
goto err;
status = be_rx_queues_create(adapter);
if (status != 0)
goto tx_qs_destroy;
goto err;
/* Allow all priorities by default. A GRP5 evt may modify this */
adapter->vlan_prio_bmap = 0xff;
status = be_mcc_queues_create(adapter);
if (status != 0)
goto rx_qs_destroy;
goto err;
adapter->link_speed = -1;
be_cmd_get_fw_ver(adapter, adapter->fw_ver, NULL);
pcie_set_readrq(adapter->pdev, 4096);
return 0;
rx_qs_destroy:
be_rx_queues_destroy(adapter);
tx_qs_destroy:
be_tx_queues_destroy(adapter);
if_destroy:
if (be_physfn(adapter) && adapter->sriov_enabled)
for (vf = 0; vf < num_vfs; vf++)
if (adapter->vf_cfg[vf].vf_if_handle)
be_cmd_if_destroy(adapter,
adapter->vf_cfg[vf].vf_if_handle,
vf + 1);
be_cmd_if_destroy(adapter, adapter->if_handle, 0);
do_none:
return status;
}
static int be_clear(struct be_adapter *adapter)
{
int vf;
if (be_physfn(adapter) && adapter->sriov_enabled)
be_vf_eth_addr_rem(adapter);
be_mcc_queues_destroy(adapter);
be_rx_queues_destroy(adapter);
be_tx_queues_destroy(adapter);
adapter->eq_next_idx = 0;
if (be_physfn(adapter) && adapter->sriov_enabled)
for (vf = 0; vf < num_vfs; vf++)
if (adapter->vf_cfg[vf].vf_if_handle)
be_cmd_if_destroy(adapter,
adapter->vf_cfg[vf].vf_if_handle,
vf + 1);
status = be_vid_config(adapter, false, 0);
if (status)
goto err;
be_cmd_if_destroy(adapter, adapter->if_handle, 0);
be_set_rx_mode(adapter->netdev);
adapter->be3_native = 0;
status = be_cmd_get_flow_control(adapter, &tx_fc, &rx_fc);
if (status)
goto err;
if (rx_fc != adapter->rx_fc || tx_fc != adapter->tx_fc) {
status = be_cmd_set_flow_control(adapter, adapter->tx_fc,
adapter->rx_fc);
if (status)
goto err;
}
/* tell fw we're done with firing cmds */
be_cmd_fw_clean(adapter);
pcie_set_readrq(adapter->pdev, 4096);
return 0;
}
err:
be_clear(adapter);
return status;
}
#define FW_FILE_HDR_SIGN "ServerEngines Corp. "
static bool be_flash_redboot(struct be_adapter *adapter,
......@@ -2915,7 +2910,7 @@ static struct net_device_ops be_netdev_ops = {
.ndo_open = be_open,
.ndo_stop = be_close,
.ndo_start_xmit = be_xmit,
.ndo_set_rx_mode = be_set_multicast_list,
.ndo_set_rx_mode = be_set_rx_mode,
.ndo_set_mac_address = be_mac_addr_set,
.ndo_change_mtu = be_change_mtu,
.ndo_get_stats64 = be_get_stats64,
......@@ -2948,10 +2943,6 @@ static void be_netdev_init(struct net_device *netdev)
netdev->flags |= IFF_MULTICAST;
/* Default settings for Rx and Tx flow control */
adapter->rx_fc = true;
adapter->tx_fc = true;
netif_set_gso_max_size(netdev, 65535);
BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
......@@ -3373,6 +3364,7 @@ static int __devinit be_probe(struct pci_dev *pdev,
be_msix_enable(adapter);
INIT_DELAYED_WORK(&adapter->work, be_worker);
adapter->rx_fc = adapter->tx_fc = true;
status = be_setup(adapter);
if (status)
......@@ -3448,7 +3440,6 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state)
be_close(netdev);
rtnl_unlock();
}
be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc);
be_clear(adapter);
be_msix_disable(adapter);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment