ARM: dts: exynos: Add sound support to Midas

Update the never-mainlined "samsung,trats2-audio" binding and instead
use the new "samsung,midas-audio" binding.
Signed-off-by: Simon Shields <simon@lineageos.org>
[s.nawrocki: fixed DAPM routing entries for MICBIAS1/2, adjusted to
 new cpu/codec binding, corrected the regulator nodes indexing]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi

@@ -33,7 +33,7 @@ flash-led {
 		};
 	};
 
-	lcd_vdd3_reg: voltage-regulator-7 {
+	lcd_vdd3_reg: voltage-regulator-10 {
 		compatible = "regulator-fixed";
 		regulator-name = "LCD_VDD_2.2V";
 		regulator-min-microvolt = <2200000>;
@@ -42,7 +42,7 @@ lcd_vdd3_reg: voltage-regulator-7 {
 		enable-active-high;
 	};
 
-	ps_als_reg: voltage-regulator-8 {
+	ps_als_reg: voltage-regulator-11 {
 		compatible = "regulator-fixed";
 		regulator-name = "LED_A_3.0V";
 		regulator-min-microvolt = <3000000>;
@@ -171,6 +171,44 @@ &s5c73m3 {
 	status = "okay";
 };
 
+&sound {
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+
+		"SPK", "SPKOUTLN",
+		"SPK", "SPKOUTLP",
+		"SPK", "SPKOUTRN",
+		"SPK", "SPKOUTRP",
+
+		"RCV", "HPOUT2N",
+		"RCV", "HPOUT2P",
+
+		"HDMI", "LINEOUT1N",
+		"HDMI", "LINEOUT1P",
+
+		"LINE", "LINEOUT2N",
+		"LINE", "LINEOUT2P",
+
+		"IN1LP", "MICBIAS1",
+		"IN1LN", "MICBIAS1",
+		"Main Mic", "MICBIAS1",
+
+		"IN1RP", "Sub Mic",
+		"IN1RN", "Sub Mic",
+
+		"IN2LP:VXRN", "MICBIAS2",
+		"Headset Mic", "MICBIAS2",
+
+		"IN2RN", "FM In",
+		"IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+	gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
+
 &touchkey_reg {
 	gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";

arch/arm/boot/dts/exynos4412-i9300.dts

@@ -20,3 +20,7 @@ memory@40000000 {
 		reg =  <0x40000000 0x40000000>;
 	};
 };
+
+&sound {
+	fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/exynos4412-midas.dtsi

@@ -102,6 +102,30 @@ touchkey_reg: voltage-regulator-6 {
 		status = "disabled";
 	};
 
+	vbatt_reg: voltage-regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBATT";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	mic_bias_reg: voltage-regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	submic_bias_reg: voltage-regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "SUB_MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -266,16 +290,18 @@ wlan_pwrseq: sdhci3-pwrseq {
 		clock-names = "ext_clock";
 	};
 
-	sound {
-		compatible = "samsung,trats2-audio";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,model = "Trats2";
-		samsung,audio-codec = <&wm1811>;
-		samsung,audio-routing =
-			"SPK", "SPKOUTLN",
-			"SPK", "SPKOUTLP",
-			"SPK", "SPKOUTRN",
-			"SPK", "SPKOUTRP";
+	sound: sound {
+		compatible = "samsung,midas-audio";
+		model = "Midas";
+		mic-bias-supply = <&mic_bias_reg>;
+		submic-bias-supply = <&submic_bias_reg>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+		codec {
+			sound-dai = <&wm1811>;
+		};
 	};
 
 	thermistor-ap {
@@ -597,11 +623,37 @@ &i2c_4 {
 	wm1811: wm1811@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
-		DCVDD-supply = <&ldo3_reg>;
+		clocks = <&pmu_system_controller 0>,
+			<&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "MCLK1", "MCLK2";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		#sound-dai-cells = <0>;
+
+		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
+			0x0 0x8000 0x0 0x0 0x0>;
+		wlf,micbias-cfg = <0x2f 0x2b>;
+
+		wlf,lineout1-feedback;
+		wlf,lineout1-se;
+		wlf,lineout2-se;
+		wlf,ldoena-always-driven;
+
+		AVDD2-supply = <&vbatt_reg>;
 		DBVDD1-supply = <&ldo3_reg>;
+		DBVDD2-supply = <&vbatt_reg>;
+		DBVDD3-supply = <&vbatt_reg>;
+		DCVDD-supply = <&ldo3_reg>;
+		CPVDD-supply = <&vbatt_reg>;
+		SPKVDD1-supply = <&vbatt_reg>;
+		SPKVDD2-supply = <&vbatt_reg>;
 		wlf,ldo1ena = <&gpj0 4 0>;
+		wlf,ldo2ena = <&gpj0 4 0>;
 	};
 };
 

arch/arm/boot/dts/exynos4412-n710x.dts

@@ -13,7 +13,7 @@ memory@40000000 {
 
 	/* bootargs are passed in by bootloader */
 
-	cam_vdda_reg: voltage-regulator-7 {
+	cam_vdda_reg: voltage-regulator-10 {
 		compatible = "regulator-fixed";
 		regulator-name = "CAM_SENSOR_CORE_1.2V";
 		regulator-min-microvolt = <1200000>;
@@ -74,6 +74,41 @@ &s5c73m3 {
 	status = "okay";
 };
 
+&sound {
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+
+		"SPK", "SPKOUTLN",
+		"SPK", "SPKOUTLP",
+
+		"RCV", "HPOUT2N",
+		"RCV", "HPOUT2P",
+
+		"HDMI", "LINEOUT1N",
+		"HDMI", "LINEOUT1P",
+
+		"LINE", "LINEOUT2N",
+		"LINE", "LINEOUT2P",
+
+		"IN1LP", "MICBIAS2",
+		"IN1LN", "MICBIAS2",
+		"Headset Mic", "MICBIAS2",
+
+		"IN1RP", "Sub Mic",
+		"IN1RN", "Sub Mic",
+
+		"IN2LP:VXRN", "Main Mic",
+		"IN2LN", "Main Mic",
+
+		"IN2RN", "FM In",
+		"IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+	regulator-always-on;
+};
+
 &touchkey_reg {
 	gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";