Merge tag 'iio-fixes-for-6.0a' of...

Merge tag 'iio-fixes-for-6.0a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:
  "1st set of IIO fixes for 6.0-rc1

   adi,ad7292
    - Prevent duplicate disable of regulator in error path.

   bosch,bmg160
    - Correct dt-binding to allow for 2 interrupt pins.

   capella,cm3605
    - Fix missing error cleanup due to premature return.

   capella,cm32181
    - Fix missing static on local symbol.

   microchip,mcp33911
    - Correctly handle sign bit.
    - Fix mismatch between driver and DT binding, including fallback to old
      driver behavior.
    - Use correct formula for voltage calculation."

* tag 'iio-fixes-for-6.0a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: light: cm32181: make cm32181_pm_ops static
  iio: ad7292: Prevent regulator double disable
  dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  iio: adc: mcp3911: use correct formula for AD conversion
  iio: adc: mcp3911: correct "microchip,device-addr" property
  iio: light: cm3605: Fix an error handling path in cm3605_probe()
  iio: adc: mcp3911: make use of the sign bit

Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml

@@ -24,8 +24,10 @@ properties:
 
   interrupts:
     minItems: 1
+    maxItems: 2
     description:
       Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
 
 required:
   - compatible

drivers/iio/adc/ad7292.c

@@ -287,10 +287,8 @@ static int ad7292_probe(struct spi_device *spi)
 
 		ret = devm_add_action_or_reset(&spi->dev,
 					       ad7292_regulator_disable, st);
-		if (ret) {
-			regulator_disable(st->reg);
+		if (ret)
 			return ret;
-		}
 
 		ret = regulator_get_voltage(st->reg);
 		if (ret < 0)

drivers/iio/adc/mcp3911.c

@@ -40,8 +40,8 @@
 #define MCP3911_CHANNEL(x)		(MCP3911_REG_CHANNEL0 + x * 3)
 #define MCP3911_OFFCAL(x)		(MCP3911_REG_OFFCAL_CH0 + x * 6)
 
-/* Internal voltage reference in uV */
-#define MCP3911_INT_VREF_UV		1200000
+/* Internal voltage reference in mV */
+#define MCP3911_INT_VREF_MV		1200
 
 #define MCP3911_REG_READ(reg, id)	((((reg) << 1) | ((id) << 5) | (1 << 0)) & 0xff)
 #define MCP3911_REG_WRITE(reg, id)	((((reg) << 1) | ((id) << 5) | (0 << 0)) & 0xff)
@@ -113,6 +113,8 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			goto out;
 
+		*val = sign_extend32(*val, 23);
+
 		ret = IIO_VAL_INT;
 		break;
 
@@ -137,11 +139,18 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 
 			*val = ret / 1000;
 		} else {
-			*val = MCP3911_INT_VREF_UV;
+			*val = MCP3911_INT_VREF_MV;
 		}
 
-		*val2 = 24;
-		ret = IIO_VAL_FRACTIONAL_LOG2;
+		/*
+		 * For 24bit Conversion
+		 * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
+		 * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
+		 */
+
+		/* val2 = (2^23 * 1.5) */
+		*val2 = 12582912;
+		ret = IIO_VAL_FRACTIONAL;
 		break;
 	}
 
@@ -208,7 +217,14 @@ static int mcp3911_config(struct mcp3911 *adc)
 	u32 configreg;
 	int ret;
 
-	device_property_read_u32(dev, "device-addr", &adc->dev_addr);
+	ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
+
+	/*
+	 * Fallback to "device-addr" due to historical mismatch between
+	 * dt-bindings and implementation
+	 */
+	if (ret)
+		device_property_read_u32(dev, "device-addr", &adc->dev_addr);
 	if (adc->dev_addr > 3) {
 		dev_err(&adc->spi->dev,
 			"invalid device address (%i). Must be in range 0-3.\n",

drivers/iio/light/cm32181.c

@@ -505,7 +505,7 @@ static int cm32181_resume(struct device *dev)
 					 cm32181->conf_regs[CM32181_REG_ADDR_CMD]);
 }
 
-DEFINE_SIMPLE_DEV_PM_OPS(cm32181_pm_ops, cm32181_suspend, cm32181_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(cm32181_pm_ops, cm32181_suspend, cm32181_resume);
 
 static const struct of_device_id cm32181_of_match[] = {
 	{ .compatible = "capella,cm3218" },

drivers/iio/light/cm3605.c

@@ -226,8 +226,10 @@ static int cm3605_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return dev_err_probe(dev, irq, "failed to get irq\n");
+	if (irq < 0) {
+		ret = dev_err_probe(dev, irq, "failed to get irq\n");
+		goto out_disable_aset;
+	}
 
 	ret = devm_request_threaded_irq(dev, irq, cm3605_prox_irq,
 					NULL, 0, "cm3605", indio_dev);