arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level

TSCADC nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and/or
device information.

Disable the TSCADC nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230810003814.85450-12-afd@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts

@@ -747,6 +747,7 @@ &usb1 {
 };
 
 &tscadc0 {
+	status = "okay";
 	/* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6>;
@@ -754,6 +755,7 @@ adc {
 };
 
 &tscadc1 {
+	status = "okay";
 	/* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
 	adc {
 		ti,adc-channels = <0>;

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts

@@ -619,12 +619,14 @@ partition@3fe0000 {
 };
 
 &tscadc0 {
+	status = "okay";
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
 };
 
 &tscadc1 {
+	status = "okay";
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};

arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi

@@ -411,6 +411,7 @@ tscadc0: tscadc@40200000 {
 		dmas = <&main_udmap 0x7400>,
 			<&main_udmap 0x7401>;
 		dma-names = "fifo0", "fifo1";
+		status = "disabled";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -430,6 +431,7 @@ tscadc1: tscadc@40210000 {
 		dmas = <&main_udmap 0x7402>,
 			<&main_udmap 0x7403>;
 		dma-names = "fifo0", "fifo1";
+		status = "disabled";
 
 		adc {
 			#io-channel-cells = <1>;

arch/arm64/boot/dts/ti/k3-j721e-sk.dts

@@ -828,16 +828,6 @@ &usb1 {
 	phy-names = "cdns3,usb3-phy";
 };
 
-&tscadc0 {
-	/* Unused */
-	status = "disabled";
-};
-
-&tscadc1 {
-	/* Unused */
-	status = "disabled";
-};
-
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;