Merge branch 'bonding-overflow'

Hangbin Liu says:

====================
bonding: fix send_peer_notif overflow

Bonding send_peer_notif was defined as u8. But the value is
num_peer_notif multiplied by peer_notif_delay, which is u8 * u32.
This would cause the send_peer_notif overflow.

Before the fix:
TEST: num_grat_arp (active-backup miimon num_grat_arp 10)           [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 20)           [ OK ]
4 garp packets sent on active slave eth1
TEST: num_grat_arp (active-backup miimon num_grat_arp 30)           [FAIL]
24 garp packets sent on active slave eth1
TEST: num_grat_arp (active-backup miimon num_grat_arp 50)           [FAIL]

After the fix:
TEST: num_grat_arp (active-backup miimon num_grat_arp 10)           [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 20)           [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 30)           [ OK ]
TEST: num_grat_arp (active-backup miimon num_grat_arp 50)           [ OK ]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/bonding.rst

@@ -776,10 +776,11 @@ peer_notif_delay
 	Specify the delay, in milliseconds, between each peer
 	notification (gratuitous ARP and unsolicited IPv6 Neighbor
 	Advertisement) when they are issued after a failover event.
-	This delay should be a multiple of the link monitor interval
-	(arp_interval or miimon, whichever is active). The default
-	value is 0 which means to match the value of the link monitor
-	interval.
+	This delay should be a multiple of the MII link monitor interval
+	(miimon).
+
+	The valid range is 0 - 300000. The default value is 0, which means
+	to match the value of the MII link monitor interval.
 
 prio
 	Slave priority. A higher number means higher priority.

drivers/net/bonding/bond_netlink.c

@@ -84,6 +84,11 @@ static int bond_fill_slave_info(struct sk_buff *skb,
 	return -EMSGSIZE;
 }
 
+/* Limit the max delay range to 300s */
+static struct netlink_range_validation delay_range = {
+	.max = 300000,
+};
+
 static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = {
 	[IFLA_BOND_MODE]		= { .type = NLA_U8 },
 	[IFLA_BOND_ACTIVE_SLAVE]	= { .type = NLA_U32 },
@@ -114,7 +119,7 @@ static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = {
 	[IFLA_BOND_AD_ACTOR_SYSTEM]	= { .type = NLA_BINARY,
 					    .len  = ETH_ALEN },
 	[IFLA_BOND_TLB_DYNAMIC_LB]	= { .type = NLA_U8 },
-	[IFLA_BOND_PEER_NOTIF_DELAY]    = { .type = NLA_U32 },
+	[IFLA_BOND_PEER_NOTIF_DELAY]    = NLA_POLICY_FULL_RANGE(NLA_U32, &delay_range),
 	[IFLA_BOND_MISSED_MAX]		= { .type = NLA_U8 },
 	[IFLA_BOND_NS_IP6_TARGET]	= { .type = NLA_NESTED },
 };

drivers/net/bonding/bond_options.c

@@ -169,6 +169,12 @@ static const struct bond_opt_value bond_num_peer_notif_tbl[] = {
 	{ NULL,      -1,  0}
 };
 
+static const struct bond_opt_value bond_peer_notif_delay_tbl[] = {
+	{ "off",     0,   0},
+	{ "maxval",  300000, BOND_VALFLAG_MAX},
+	{ NULL,      -1,  0}
+};
+
 static const struct bond_opt_value bond_primary_reselect_tbl[] = {
 	{ "always",  BOND_PRI_RESELECT_ALWAYS,  BOND_VALFLAG_DEFAULT},
 	{ "better",  BOND_PRI_RESELECT_BETTER,  0},
@@ -488,7 +494,7 @@ static const struct bond_option bond_opts[BOND_OPT_LAST] = {
 		.id = BOND_OPT_PEER_NOTIF_DELAY,
 		.name = "peer_notif_delay",
 		.desc = "Delay between each peer notification on failover event, in milliseconds",
-		.values = bond_intmax_tbl,
+		.values = bond_peer_notif_delay_tbl,
 		.set = bond_option_peer_notif_delay_set
 	}
 };

include/net/bonding.h

@@ -233,7 +233,7 @@ struct bonding {
 	 */
 	spinlock_t mode_lock;
 	spinlock_t stats_lock;
-	u8	 send_peer_notif;
+	u32	 send_peer_notif;
 	u8       igmp_retrans;
 #ifdef CONFIG_PROC_FS
 	struct   proc_dir_entry *proc_entry;

tools/testing/selftests/drivers/net/bonding/bond_options.sh

@@ -6,6 +6,7 @@
 ALL_TESTS="
 	prio
 	arp_validate
+	num_grat_arp
 "
 
 REQUIRE_MZ=no
@@ -255,6 +256,55 @@ arp_validate()
 	arp_validate_ns "active-backup"
 }
 
+garp_test()
+{
+	local param="$1"
+	local active_slave exp_num real_num i
+	RET=0
+
+	# create bond
+	bond_reset "${param}"
+
+	bond_check_connection
+	[ $RET -ne 0 ] && log_test "num_grat_arp" "$retmsg"
+
+
+	# Add tc rules to count GARP number
+	for i in $(seq 0 2); do
+		tc -n ${g_ns} filter add dev s$i ingress protocol arp pref 1 handle 101 \
+			flower skip_hw arp_op request arp_sip ${s_ip4} arp_tip ${s_ip4} action pass
+	done
+
+	# Do failover
+	active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+	ip -n ${s_ns} link set ${active_slave} down
+
+	exp_num=$(echo "${param}" | cut -f6 -d ' ')
+	sleep $((exp_num + 2))
+
+	active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+
+	# check result
+	real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}")
+	if [ "${real_num}" -ne "${exp_num}" ]; then
+		echo "$real_num garp packets sent on active slave ${active_slave}"
+		RET=1
+	fi
+
+	for i in $(seq 0 2); do
+		tc -n ${g_ns} filter del dev s$i ingress
+	done
+}
+
+num_grat_arp()
+{
+	local val
+	for val in 10 20 30 50; do
+		garp_test "mode active-backup miimon 100 num_grat_arp $val peer_notify_delay 1000"
+		log_test "num_grat_arp" "active-backup miimon num_grat_arp $val"
+	done
+}
+
 trap cleanup EXIT
 
 setup_prepare

tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh

@@ -61,6 +61,8 @@ server_create()
 		ip -n ${g_ns} link set s${i} up
 		ip -n ${g_ns} link set s${i} master br0
 		ip -n ${s_ns} link set eth${i} master bond0
+
+		tc -n ${g_ns} qdisc add dev s${i} clsact
 	done
 
 	ip -n ${s_ns} link set bond0 up

tools/testing/selftests/net/forwarding/lib.sh

@@ -791,8 +791,9 @@ tc_rule_handle_stats_get()
 	local id=$1; shift
 	local handle=$1; shift
 	local selector=${1:-.packets}; shift
+	local netns=${1:-""}; shift
 
-	tc -j -s filter show $id \
+	tc $netns -j -s filter show $id \
 	    | jq ".[] | select(.options.handle == $handle) | \
 		  .options.actions[0].stats$selector"
 }