drm: rcar-du: Output the DISP signal on the ODDF pin

The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.

Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drivers/gpu/drm/rcar-du/rcar_du_group.c

@@ -44,6 +44,16 @@ void rcar_du_group_write(struct rcar_du_group *rgrp, u32 reg, u32 data)
 	rcar_du_write(rgrp->dev, rgrp->mmio_offset + reg, data);
 }
 
+static void rcar_du_group_setup_pins(struct rcar_du_group *rgrp)
+{
+	u32 defr6 = DEFR6_CODE | DEFR6_ODPM12_DISP;
+
+	if (rgrp->num_crtcs > 1)
+		defr6 |= DEFR6_ODPM22_DISP;
+
+	rcar_du_group_write(rgrp, DEFR6, defr6);
+}
+
 static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
 {
 	u32 defr8 = DEFR8_CODE | DEFR8_DEFE8;
@@ -71,6 +81,8 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
 	rcar_du_group_write(rgrp, DEFR4, DEFR4_CODE);
 	rcar_du_group_write(rgrp, DEFR5, DEFR5_CODE | DEFR5_DEFE5);
 
+	rcar_du_group_setup_pins(rgrp);
+
 	if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS)) {
 		rcar_du_group_setup_defr8(rgrp);
 

drivers/gpu/drm/rcar-du/rcar_du_regs.h

@@ -187,7 +187,7 @@
 
 #define DEFR6			0x000e8
 #define DEFR6_CODE		(0x7778 << 16)
-#define DEFR6_ODPM22_D2SMR	(0 << 10)
+#define DEFR6_ODPM22_DSMR	(0 << 10)
 #define DEFR6_ODPM22_DISP	(2 << 10)
 #define DEFR6_ODPM22_CDE	(3 << 10)
 #define DEFR6_ODPM22_MASK	(3 << 10)