Commit a5fa2660 authored by Marius Vlad's avatar Marius Vlad Committed by Greg Kroah-Hartman

tty/serial/fsl_lpuart: Add CONSOLE_POLL support for lpuart32.

This mirrors commit 2a41bc2a but for 32-bit register definitions.

Fix a minor typo while at it.
Signed-off-by: default avatarMarius Vlad <marius.vlad0@gmail.com>
CC: Nicolae Rosia <nicolae_rosia@mentor.com>
CC: Stefan Golinschi <stefan.golinschi@gmail.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent fc60a8b6
......@@ -117,7 +117,7 @@
#define UARTSFIFO_TXOF 0x02
#define UARTSFIFO_RXUF 0x01
/* 32-bit register defination */
/* 32-bit register definition */
#define UARTBAUD 0x00
#define UARTSTAT 0x04
#define UARTCTRL 0x08
......@@ -521,6 +521,57 @@ static int lpuart_poll_get_char(struct uart_port *port)
return readb(port->membase + UARTDR);
}
static int lpuart32_poll_init(struct uart_port *port)
{
unsigned long flags;
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
u32 temp;
sport->port.fifosize = 0;
spin_lock_irqsave(&sport->port.lock, flags);
/* Disable Rx & Tx */
writel(0, sport->port.membase + UARTCTRL);
temp = readl(sport->port.membase + UARTFIFO);
/* Enable Rx and Tx FIFO */
writel(temp | UARTFIFO_RXFE | UARTFIFO_TXFE,
sport->port.membase + UARTFIFO);
/* flush Tx and Rx FIFO */
writel(UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH,
sport->port.membase + UARTFIFO);
/* explicitly clear RDRF */
if (readl(sport->port.membase + UARTSTAT) & UARTSTAT_RDRF) {
readl(sport->port.membase + UARTDATA);
writel(UARTFIFO_RXUF, sport->port.membase + UARTFIFO);
}
/* Enable Rx and Tx */
writel(UARTCTRL_RE | UARTCTRL_TE, sport->port.membase + UARTCTRL);
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
}
static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c)
{
while (!(readl(port->membase + UARTSTAT) & UARTSTAT_TDRE))
barrier();
writel(c, port->membase + UARTDATA);
}
static int lpuart32_poll_get_char(struct uart_port *port)
{
if (!(readl(port->membase + UARTSTAT) & UARTSTAT_RDRF))
return NO_POLL_CHAR;
return readl(port->membase + UARTDATA);
}
#endif
static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
......@@ -1776,6 +1827,11 @@ static const struct uart_ops lpuart32_pops = {
.config_port = lpuart_config_port,
.verify_port = lpuart_verify_port,
.flush_buffer = lpuart_flush_buffer,
#if defined(CONFIG_CONSOLE_POLL)
.poll_init = lpuart32_poll_init,
.poll_get_char = lpuart32_poll_get_char,
.poll_put_char = lpuart32_poll_put_char,
#endif
};
static struct lpuart_port *lpuart_ports[UART_NR];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment