Skip to content

L
linux
Commit a637a114 authored by Ladislav Michl's avatar Ladislav Michl Committed by Ralf Baechle
Browse files
Options

VINO driver version 0.0.5. 

Second cut of the VINO / Indycam driver for the Silicon Graphics Indy,
much more feature complete and bug free.
parent a06d61c6
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1545 additions and 680 deletions
drivers/media/video/indycam.c
View file @ a637a114
This diff is collapsed.
drivers/media/video/indycam.h
View file @ a637a114
......@@ -22,21 +22,21 @@
#define INDYCAM_VERSION_MINOR(x) ((x) & 0x0f)
/* Register bus addresses */
#define INDYCAM_CONTROL 0x00
#define INDYCAM_SHUTTER 0x01
#define INDYCAM_GAIN 0x02
#define INDYCAM_BRIGHTNESS 0x03 /* read-only */
#define INDYCAM_RED_BALANCE 0x04
#define INDYCAM_BLUE_BALANCE 0x05
#define INDYCAM_RED_SATURATION 0x06
#define INDYCAM_BLUE_SATURATION 0x07
#define INDYCAM_GAMMA 0x08
#define INDYCAM_VERSION 0x0e /* read-only */
#define INDYCAM_RESET 0x0f /* write-only */
#define INDYCAM_LED 0x46
#define INDYCAM_ORIENTATION 0x47
#define INDYCAM_BUTTON 0x48
#define INDYCAM_REG_CONTROL 0x00
#define INDYCAM_REG_SHUTTER 0x01
#define INDYCAM_REG_GAIN 0x02
#define INDYCAM_REG_BRIGHTNESS 0x03 /* read-only */
#define INDYCAM_REG_RED_BALANCE 0x04
#define INDYCAM_REG_BLUE_BALANCE 0x05
#define INDYCAM_REG_RED_SATURATION 0x06
#define INDYCAM_REG_BLUE_SATURATION 0x07
#define INDYCAM_REG_GAMMA 0x08
#define INDYCAM_REG_VERSION 0x0e /* read-only */
#define INDYCAM_REG_RESET 0x0f /* write-only */
#define INDYCAM_REG_LED 0x46
#define INDYCAM_REG_ORIENTATION 0x47
#define INDYCAM_REG_BUTTON 0x48
/* Field definitions of registers */
#define INDYCAM_CONTROL_AGCENA (1<<0) /* automatic gain control */
......@@ -59,13 +59,14 @@
#define INDYCAM_ORIENTATION_BOTTOM_TO_TOP 0x40
#define INDYCAM_BUTTON_RELEASED 0x10
/* Values for controls */
#define INDYCAM_SHUTTER_MIN 0x00
#define INDYCAM_SHUTTER_MAX 0xff
#define INDYCAM_GAIN_MIN 0x00
#define INDYCAM_GAIN_MAX 0xff
#define INDYCAM_RED_BALANCE_MIN 0x00 /* the effect is the opposite? */
#define INDYCAM_RED_BALANCE_MAX 0xff
#define INDYCAM_BLUE_BALANCE_MIN 0x00 /* the effect is the opposite? */
#define INDYCAM_RED_BALANCE_MIN 0x00
#define INDYCAM_RED_BALANCE_MAX 0xff
#define INDYCAM_BLUE_BALANCE_MIN 0x00
#define INDYCAM_BLUE_BALANCE_MAX 0xff
#define INDYCAM_RED_SATURATION_MIN 0x00
#define INDYCAM_RED_SATURATION_MAX 0xff
......@@ -74,34 +75,9 @@
#define INDYCAM_GAMMA_MIN 0x00
#define INDYCAM_GAMMA_MAX 0xff
/* Driver interface definitions */
#define INDYCAM_VALUE_ENABLED 1
#define INDYCAM_VALUE_DISABLED 0
#define INDYCAM_VALUE_UNCHANGED -1
/* When setting controls, a value of -1 leaves the control unchanged. */
struct indycam_control {
int agc; /* boolean */
int awb; /* boolean */
int shutter;
int gain;
int red_balance;
int blue_balance;
int red_saturation;
int blue_saturation;
int gamma;
};
#define DECODER_INDYCAM_GET_CONTROLS _IOR('d', 193, struct indycam_control)
#define DECODER_INDYCAM_SET_CONTROLS _IOW('d', 194, struct indycam_control)
/* Default values for controls */
#define INDYCAM_AGC_DEFAULT INDYCAM_VALUE_ENABLED
#define INDYCAM_AWB_DEFAULT INDYCAM_VALUE_ENABLED
#define INDYCAM_SHUTTER_DEFAULT INDYCAM_SHUTTER_60
#define INDYCAM_AGC_DEFAULT 1
#define INDYCAM_AWB_DEFAULT 0
#define INDYCAM_SHUTTER_DEFAULT 0xff
#define INDYCAM_GAIN_DEFAULT 0x80
#define INDYCAM_RED_BALANCE_DEFAULT 0x18
#define INDYCAM_BLUE_BALANCE_DEFAULT 0xa4
......@@ -109,4 +85,24 @@ struct indycam_control {
#define INDYCAM_BLUE_SATURATION_DEFAULT 0xc0
#define INDYCAM_GAMMA_DEFAULT 0x80
/* Driver interface definitions */
#define INDYCAM_CONTROL_AGC 0 /* boolean */
#define INDYCAM_CONTROL_AWB 1 /* boolean */
#define INDYCAM_CONTROL_SHUTTER 2
#define INDYCAM_CONTROL_GAIN 3
#define INDYCAM_CONTROL_RED_BALANCE 4
#define INDYCAM_CONTROL_BLUE_BALANCE 5
#define INDYCAM_CONTROL_RED_SATURATION 6
#define INDYCAM_CONTROL_BLUE_SATURATION 7
#define INDYCAM_CONTROL_GAMMA 8
struct indycam_control {
u8 type;
s32 value;
};
#define DECODER_INDYCAM_GET_CONTROL _IOR('d', 193, struct indycam_control)
#define DECODER_INDYCAM_SET_CONTROL _IOW('d', 194, struct indycam_control)
#endif
drivers/media/video/saa7191.c
View file @ a637a114
This diff is collapsed.
drivers/media/video/saa7191.h
View file @ a637a114
......@@ -24,8 +24,8 @@
#define SAA7191_REG_HPHI 0x05
#define SAA7191_REG_LUMA 0x06
#define SAA7191_REG_HUEC 0x07
#define SAA7191_REG_CKTQ 0x08
#define SAA7191_REG_CKTS 0x09
#define SAA7191_REG_CKTQ 0x08 /* bits 3-7 */
#define SAA7191_REG_CKTS 0x09 /* bits 3-7 */
#define SAA7191_REG_PLSE 0x0a
#define SAA7191_REG_SESE 0x0b
#define SAA7191_REG_GAIN 0x0c
......@@ -43,30 +43,82 @@
/* Status Register definitions */
#define SAA7191_STATUS_CODE 0x01 /* color detected flag */
#define SAA7191_STATUS_FIDT 0x20 /* format type NTSC/PAL */
#define SAA7191_STATUS_HLCK 0x40 /* PLL unlocked/locked */
#define SAA7191_STATUS_FIDT 0x20 /* signal type 50/60 Hz */
#define SAA7191_STATUS_HLCK 0x40 /* PLL unlocked(1)/locked(0) */
#define SAA7191_STATUS_STTC 0x80 /* tv/vtr time constant */
/* Luminance Control Register definitions */
/* input mode select bit:
* 0=CVBS (chrominance trap active), 1=S-Video (trap bypassed) */
#define SAA7191_LUMA_BYPS 0x80
/* Chroma Gain Control Settings Register definitions */
/* 0=automatic colour-killer enabled, 1=forced colour on */
/* pre-filter (only when chrominance trap is active) */
#define SAA7191_LUMA_PREF 0x40
/* aperture bandpass to select different characteristics with maximums
* (bits 4-5) */
#define SAA7191_LUMA_BPSS_MASK 0x30
#define SAA7191_LUMA_BPSS_SHIFT 4
#define SAA7191_LUMA_BPSS_3 0x30
#define SAA7191_LUMA_BPSS_2 0x20
#define SAA7191_LUMA_BPSS_1 0x10
#define SAA7191_LUMA_BPSS_0 0x00
/* coring range for high frequency components according to 8-bit luminance
* (bits 2-3)
* 0=coring off, n= (+-)n LSB */
#define SAA7191_LUMA_CORI_MASK 0x0c
#define SAA7191_LUMA_CORI_SHIFT 2
#define SAA7191_LUMA_CORI_3 0x0c
#define SAA7191_LUMA_CORI_2 0x08
#define SAA7191_LUMA_CORI_1 0x04
#define SAA7191_LUMA_CORI_0 0x00
/* aperture bandpass filter weights high frequency components of luminance
* signal (bits 0-1)
* 0=factor 0, 1=0.25, 2=0.5, 3=1 */
#define SAA7191_LUMA_APER_MASK 0x03
#define SAA7191_LUMA_APER_SHIFT 0
#define SAA7191_LUMA_APER_3 0x03
#define SAA7191_LUMA_APER_2 0x02
#define SAA7191_LUMA_APER_1 0x01
#define SAA7191_LUMA_APER_0 0x00
/* Chrominance Gain Control Settings Register definitions */
/* colour on: 0=automatic colour-killer enabled, 1=forced colour on */
#define SAA7191_GAIN_COLO 0x80
/* chrominance gain control (AGC filter)
* 0=loop filter time constant slow, 1=medium, 2=fast, 3=actual gain */
#define SAA7191_GAIN_LFIS_MASK 0x60
#define SAA7191_GAIN_LFIS_SHIFT 5
#define SAA7191_GAIN_LFIS_3 0x60
#define SAA7191_GAIN_LFIS_2 0x40
#define SAA7191_GAIN_LFIS_1 0x20
#define SAA7191_GAIN_LFIS_0 0x00
/* Standard/Mode Control Register definitions */
/* tv/vtr mode bit: 0=TV mode (slow time constant),
* 1=VTR mode (fast time constant) */
#define SAA7191_STDC_VTRC 0x80
/* SAA7191B-specific functions enable (RTCO, ODD and GPSW0 outputs)
* 0=outputs set to high-impedance (circuit equals SAA7191), 1=enabled */
#define SAA7191_STDC_NFEN 0x08
/* HREF generation: 0=like SAA7191, 1=HREF is 8xLLC2 clocks earlier */
#define SAA7191_STDC_HRMV 0x04
/* general purpose switch 0
* (not used with VINO afaik) */
#define SAA7191_STDC_GPSW0 0x02
/* SECAM mode bit: 0=other standards, 1=SECAM */
#define SAA7191_STDC_SECS 0x01
/* the bit fields above must be or'd with this value */
#define SAA7191_STDC_VALUE 0x0c
/* I/O and Clock Control Register definitions */
/* horizontal clock PLL: 0=PLL closed,
* 1=PLL circuit open and horizontal freq fixed */
#define SAA7191_IOCK_HPLL 0x80
/* colour-difference output enable (outputs UV0-UV7) */
#define SAA7191_IOCK_OEDC 0x40
/* H-sync output enable */
#define SAA7191_IOCK_OEHS 0x20
/* V-sync output enable */
#define SAA7191_IOCK_OEVS 0x10
/* luminance output enable (outputs Y0-Y7) */
#define SAA7191_IOCK_OEDY 0x08
/* S-VHS bit (chrominance from CVBS or from chrominance input):
* 0=controlled by BYPS-bit, 1=from chrominance input */
#define SAA7191_IOCK_CHRS 0x04
......@@ -83,11 +135,40 @@
/* field select: (if AUFD=0)
* 0=50Hz (625 lines), 1=60Hz (525 lines) */
#define SAA7191_CTL3_FSEL 0x40
/* the bit fields above must be or'd with this value */
#define SAA7191_CTL3_VALUE 0x19
/* SECAM cross-colour reduction enable */
#define SAA7191_CTL3_SXCR 0x20
/* sync and clamping pulse enable (HCL and HSY outputs) */
#define SAA7191_CTL3_SCEN 0x10
/* output format: 0=4:1:1, 1=4:2:2 (4:2:2 for VINO) */
#define SAA7191_CTL3_OFTS 0x08
/* luminance delay compensation
* 0=0*2/LLC, 1=+1*2/LLC, 2=+2*2/LLC, 3=+3*2/LLC,
* 4=-4*2/LLC, 5=-3*2/LLC, 6=-2*2/LLC, 7=-1*2/LLC
* step size = 2/LLC = 67.8ns for 50Hz, 81.5ns for 60Hz */
#define SAA7191_CTL3_YDEL_MASK 0x07
#define SAA7191_CTL3_YDEL_SHIFT 0
#define SAA7191_CTL3_YDEL2 0x04
#define SAA7191_CTL3_YDEL1 0x02
#define SAA7191_CTL3_YDEL0 0x01
/* Miscellaneous Control #2 Register definitions */
/* select HREF position
* 0=normal, HREF is matched to YUV output port,
* 1=HREF is matched to CVBS input port */
#define SAA7191_CTL4_HRFS 0x04
/* vertical noise reduction
* 0=normal, 1=searching window, 2=auto-deflection, 3=reduction bypassed */
#define SAA7191_CTL4_VNOI_MASK 0x03
#define SAA7191_CTL4_VNOI_SHIFT 0
#define SAA7191_CTL4_VNOI_3 0x03
#define SAA7191_CTL4_VNOI_2 0x02
#define SAA7191_CTL4_VNOI_1 0x01
#define SAA7191_CTL4_VNOI_0 0x00
/* Chrominance Gain Control Register definitions
* (nominal value for UV CCIR level) */
* - for QAM-modulated input signals, effects output amplitude
* (SECAM gain fixed)
* (nominal values for UV CCIR level) */
#define SAA7191_CHCV_NTSC 0x2c
#define SAA7191_CHCV_PAL 0x59
......@@ -99,16 +180,13 @@
#define SAA7191_NORM_PAL 1
#define SAA7191_NORM_NTSC 2
#define SAA7191_NORM_SECAM 3
#define SAA7191_VALUE_ENABLED 1
#define SAA7191_VALUE_DISABLED 0
#define SAA7191_VALUE_UNCHANGED -1
#define SAA7191_NORM_AUTO_EXT 4 /* extended auto-detection */
struct saa7191_status {
/* 0=no signal, 1=signal active*/
/* 0=no signal, 1=signal detected */
int signal;
/* 0=50hz (pal) signal, 1=60hz (ntsc) signal */
int ntsc;
int signal_60hz;
/* 0=no color detected, 1=color detected */
int color;
......@@ -118,22 +196,60 @@ struct saa7191_status {
int norm;
};
#define SAA7191_HUE_MIN 0x00
#define SAA7191_HUE_MAX 0xff
#define SAA7191_HUE_DEFAULT 0x80
#define SAA7191_BANDPASS_MIN 0x00
#define SAA7191_BANDPASS_MAX 0x03
#define SAA7191_BANDPASS_DEFAULT 0x00
#define SAA7191_BANDPASS_WEIGHT_MIN 0x00
#define SAA7191_BANDPASS_WEIGHT_MAX 0x03
#define SAA7191_BANDPASS_WEIGHT_DEFAULT 0x01
#define SAA7191_CORING_MIN 0x00
#define SAA7191_CORING_MAX 0x03
#define SAA7191_CORING_DEFAULT 0x00
#define SAA7191_HUE_MIN 0x00
#define SAA7191_HUE_MAX 0xff
#define SAA7191_HUE_DEFAULT 0x80
#define SAA7191_VTRC_MIN 0x00
#define SAA7191_VTRC_MAX 0x01
#define SAA7191_VTRC_DEFAULT 0x00
#define SAA7191_FORCE_COLOUR_MIN 0x00
#define SAA7191_FORCE_COLOUR_MAX 0x01
#define SAA7191_FORCE_COLOUR_DEFAULT 0x00
#define SAA7191_CHROMA_GAIN_MIN 0x00
#define SAA7191_CHROMA_GAIN_MAX 0x03
#define SAA7191_CHROMA_GAIN_DEFAULT 0x00
#define SAA7191_LUMA_DELAY_MIN -0x04
#define SAA7191_LUMA_DELAY_MAX 0x03
#define SAA7191_LUMA_DELAY_DEFAULT 0x01
#define SAA7191_VNR_MIN 0x00
#define SAA7191_VNR_MAX 0x03
#define SAA7191_VNR_DEFAULT 0x00
#define SAA7191_VTRC_MIN 0x00
#define SAA7191_VTRC_MAX 0x01
#define SAA7191_VTRC_DEFAULT 0x00
#define SAA7191_CONTROL_BANDPASS 0
#define SAA7191_CONTROL_BANDPASS_WEIGHT 1
#define SAA7191_CONTROL_CORING 2
#define SAA7191_CONTROL_FORCE_COLOUR 3 /* boolean */
#define SAA7191_CONTROL_CHROMA_GAIN 4
#define SAA7191_CONTROL_HUE 5
#define SAA7191_CONTROL_VTRC 6 /* boolean */
#define SAA7191_CONTROL_LUMA_DELAY 7
#define SAA7191_CONTROL_VNR 8
struct saa7191_control {
int hue;
int vtrc;
u8 type;
s32 value;
};
#define DECODER_SAA7191_GET_STATUS _IOR('d', 195, struct saa7191_status)
#define DECODER_SAA7191_SET_NORM _IOW('d', 196, int)
#define DECODER_SAA7191_GET_CONTROLS _IOR('d', 197, struct saa7191_control)
#define DECODER_SAA7191_SET_CONTROLS _IOW('d', 198, struct saa7191_control)
#define DECODER_SAA7191_GET_CONTROL _IOR('d', 197, struct saa7191_control)
#define DECODER_SAA7191_SET_CONTROL _IOW('d', 198, struct saa7191_control)
#endif
drivers/media/video/vino.c
View file @ a637a114
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7