USB: serial: replace symbolic permissions by octal permissions

Replace symbolic permission macros with octal permission numbers
because octal permission numbers are easier to read and understand
instead of their symbolic macro names.

No functional change.
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/cypress_m8.c

@@ -1199,9 +1199,9 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-module_param(stats, bool, S_IRUGO | S_IWUSR);
+module_param(stats, bool, 0644);
 MODULE_PARM_DESC(stats, "Enable statistics or not");
-module_param(interval, int, S_IRUGO | S_IWUSR);
+module_param(interval, int, 0644);
 MODULE_PARM_DESC(interval, "Overrides interrupt interval");
-module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
+module_param(unstable_bauds, bool, 0644);
 MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");

drivers/usb/serial/ftdi_sio.c

@@ -2937,5 +2937,5 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+module_param(ndi_latency_timer, int, 0644);
 MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");

drivers/usb/serial/garmin_gps.c

@@ -1444,5 +1444,5 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-module_param(initial_mode, int, S_IRUGO);
+module_param(initial_mode, int, 0444);
 MODULE_PARM_DESC(initial_mode, "Initial mode");

drivers/usb/serial/io_ti.c

@@ -2746,9 +2746,9 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("edgeport/down3.bin");
 
-module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR);
+module_param(ignore_cpu_rev, bool, 0644);
 MODULE_PARM_DESC(ignore_cpu_rev,
 			"Ignore the cpu revision when connecting to a device");
 
-module_param(default_uart_mode, int, S_IRUGO | S_IWUSR);
+module_param(default_uart_mode, int, 0644);
 MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");

drivers/usb/serial/ipaq.c

@@ -599,10 +599,10 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-module_param(connect_retries, int, S_IRUGO|S_IWUSR);
+module_param(connect_retries, int, 0644);
 MODULE_PARM_DESC(connect_retries,
 		"Maximum number of connect retries (one second each)");
 
-module_param(initial_wait, int, S_IRUGO|S_IWUSR);
+module_param(initial_wait, int, 0644);
 MODULE_PARM_DESC(initial_wait,
 		"Time to wait before attempting a connection (in seconds)");

drivers/usb/serial/iuu_phoenix.c

@@ -1188,20 +1188,20 @@ MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-module_param(xmas, bool, S_IRUGO | S_IWUSR);
+module_param(xmas, bool, 0644);
 MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
 
-module_param(boost, int, S_IRUGO | S_IWUSR);
+module_param(boost, int, 0644);
 MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)");
 
-module_param(clockmode, int, S_IRUGO | S_IWUSR);
+module_param(clockmode, int, 0644);
 MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, "
 		"3=6 Mhz)");
 
-module_param(cdmode, int, S_IRUGO | S_IWUSR);
+module_param(cdmode, int, 0644);
 MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, "
 		 "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)");
 
-module_param(vcc_default, int, S_IRUGO | S_IWUSR);
+module_param(vcc_default, int, 0644);
 MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 "
 		"for 5V). Default to 5.");

drivers/usb/serial/sierra.c

@@ -1056,5 +1056,5 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL v2");
 
-module_param(nmea, bool, S_IRUGO | S_IWUSR);
+module_param(nmea, bool, 0644);
 MODULE_PARM_DESC(nmea, "NMEA streaming");