powerpc/86xx: Move pci1 definition to the include file

Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <oss@buserror.net>

arch/powerpc/boot/dts/fsl/gef_ppc9a.dts

@@ -211,6 +211,10 @@ pcie@0 {
 				  0x0 0x00400000>;
 		};
 	};
+
+	pci1: pcie@fef09000 {
+		status = "disabled";
+	};
 };
 
 /include/ "mpc8641si-post.dtsi"

arch/powerpc/boot/dts/fsl/gef_sbc310.dts

@@ -24,10 +24,6 @@ / {
 	model = "GEF_SBC310";
 	compatible = "gef,sbc310";
 
-	aliases {
-		pci1 = &pci1;
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;	// set by uboot
@@ -223,29 +219,11 @@ pcie@0 {
 	};
 
 	pci1: pcie@fef09000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xfef09000 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
-		clock-frequency = <100000000>;
-		interrupts = <0x19 0x2 0 0>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
-			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
-			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
-			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
-			>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0x0 0xc0000000
 				  0x02000000 0x0 0xc0000000
 				  0x0 0x20000000

arch/powerpc/boot/dts/fsl/gef_sbc610.dts

@@ -209,6 +209,10 @@ pcie@0 {
 				  0x0 0x00400000>;
 		};
 	};
+
+	pci1: pcie@fef09000 {
+		status = "disabled";
+	};
 };
 
 /include/ "mpc8641si-post.dtsi"

arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts

@@ -15,10 +15,6 @@ / {
 	model = "MPC8641HPCN";
 	compatible = "fsl,mpc8641hpcn";
 
-	aliases {
-		pci1 = &pci1;
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>;	// 1G at 0x0
@@ -359,29 +355,11 @@ gpio@400 {
 	};
 
 	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xffe09000 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <100000000>;
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
+
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0x0 0xa0000000
 				  0x02000000 0x0 0xa0000000
 				  0x0 0x20000000

arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts

@@ -17,10 +17,6 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		pci1 = &pci1;
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x0 0x40000000>;	// 1G at 0x0
@@ -326,29 +322,11 @@ gpio@400 {
 	};
 
 	pci1: pcie@fffe09000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0x0f 0xffe09000 0x0 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <100000000>;
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
+
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0x0 0xe0000000
 				  0x02000000 0x0 0xe0000000
 				  0x0 0x20000000

arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi

@@ -113,6 +113,33 @@ &pci0 {
 
 	pcie@0 {
 		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+	};
+};
+
+&pci1 {
+	compatible = "fsl,mpc8641-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <100000000>;
+	interrupts = <25 2 0 0>;
+	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+
+	interrupt-map = <
+		0x0000 0x0 0x0 0x1 &mpic 0x4 0x1
+		0x0000 0x0 0x0 0x2 &mpic 0x5 0x1
+		0x0000 0x0 0x0 0x3 &mpic 0x6 0x1
+		0x0000 0x0 0x0 0x4 &mpic 0x7 0x1
+		>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";

arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi

@@ -25,6 +25,7 @@ aliases {
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
+		pci1 = &pci1;
 	};
 
 	cpus {

arch/powerpc/boot/dts/fsl/sbc8641d.dts

@@ -19,10 +19,6 @@ / {
 	model = "SBC8641D";
 	compatible = "wind,sbc8641";
 
-	aliases {
-		pci1 = &pci1;
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;	// 512M at 0x0
@@ -165,30 +161,11 @@ pcie@0 {
 	};
 
 	pci1: pcie@f8009000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xf8009000 0x1000>;
-		bus-range = <0 0xff>;
 		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
-		clock-frequency = <100000000>;
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0x0 0xa0000000
 				  0x02000000 0x0 0xa0000000
 				  0x0 0x20000000