Commit a6845e1e authored by Rafael Gago's avatar Rafael Gago Committed by Greg Kroah-Hartman

serial: core: Consider rs485 settings to drive RTS

Previously the rs485 settings weren't considered when setting the RTS
line, so e.g. closing and reopening a port made serial_core to drive
the line as if rs485 was disabled.

This patch fixes those issues.
Signed-off-by: default avatarRafael Gago Castano <rgc@hms.se>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d77dc47f
......@@ -165,6 +165,27 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0)
#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear)
static void uart_port_dtr_rts(struct uart_port *uport, int raise)
{
int rs485_on = uport->rs485_config &&
(uport->rs485.flags & SER_RS485_ENABLED);
int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND);
if (raise) {
if (rs485_on && !RTS_after_send) {
uart_set_mctrl(uport, TIOCM_DTR);
uart_clear_mctrl(uport, TIOCM_RTS);
} else {
uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}
} else {
unsigned int clear = TIOCM_DTR;
clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0;
uart_clear_mctrl(uport, clear);
}
}
/*
* Startup the port. This will be called once per open. All calls
* will be serialised by the per-port mutex.
......@@ -214,7 +235,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
* port is open and ready to respond.
*/
if (init_hw && C_BAUD(tty))
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
uart_port_dtr_rts(uport, 1);
}
/*
......@@ -272,7 +293,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
uport->cons->cflag = tty->termios.c_cflag;
if (!tty || C_HUPCL(tty))
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
uart_port_dtr_rts(uport, 0);
uart_port_shutdown(port);
}
......@@ -1658,7 +1679,7 @@ static int uart_carrier_raised(struct tty_port *port)
return 0;
}
static void uart_dtr_rts(struct tty_port *port, int onoff)
static void uart_dtr_rts(struct tty_port *port, int raise)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport;
......@@ -1666,12 +1687,7 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
uport = uart_port_ref(state);
if (!uport)
return;
if (onoff)
uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
else
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
uart_port_dtr_rts(uport, raise);
uart_port_deref(uport);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment