Commit a6b74871 authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Mark Brown

ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec

This patch adds bindings for wcd9340/wcd9341 audio codec which can
support both SLIMbus and I2S/I2C interface.
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191219103153.14875-2-srinivas.kandagatla@linaro.orgReviewed-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent a82cf72f
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
maintainers:
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description: |
Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
It has in-built Soundwire controller, pin controller, interrupt mux and
supports both I2S/I2C and SLIMbus audio interfaces.
properties:
compatible:
const: slim217,250
reg:
maxItems: 1
interrupts:
maxItems: 1
reset-gpios:
description: GPIO spec for reset line to use
maxItems: 1
slim-ifc-dev: true
clocks:
maxItems: 1
clock-names:
const: extclk
vdd-buck-supply:
description: A reference to the 1.8V buck supply
vdd-buck-sido-supply:
description: A reference to the 1.8V SIDO buck supply
vdd-rx-supply:
description: A reference to the 1.8V rx supply
vdd-tx-supply:
description: A reference to the 1.8V tx supply
vdd-vbat-supply:
description: A reference to the vbat supply
vdd-io-supply:
description: A reference to the 1.8V I/O supply
vdd-micbias-supply:
description: A reference to the micbias supply
qcom,micbias1-microvolt:
description: micbias1 voltage
minimum: 1800000
maximum: 2850000
qcom,micbias2-microvolt:
description: micbias2 voltage
minimum: 1800000
maximum: 2850000
qcom,micbias3-microvolt:
description: micbias3 voltage
minimum: 1800000
maximum: 2850000
qcom,micbias4-microvolt:
description: micbias4 voltage
minimum: 1800000
maximum: 2850000
clock-output-names:
const: mclk
clock-frequency:
description: Clock frequency of output clk in Hz
interrupt-controller: true
'#interrupt-cells':
const: 1
'#clock-cells':
const: 0
'#sound-dai-cells':
const: 1
"#address-cells":
const: 1
"#size-cells":
const: 1
gpio@42:
type: object
allOf:
- $ref: ../gpio/qcom,wcd934x-gpio.yaml#
patternProperties:
"^.*@[0-9a-f]+$":
type: object
description: |
WCD934x subnode for each slave devices. Bindings of each subnodes
depends on the specific driver providing the functionality and
documented in their respective bindings.
properties:
reg:
maxItems: 1
required:
- reg
required:
- compatible
- reg
- reset-gpios
- slim-ifc-dev
- interrupts
- interrupt-controller
- clock-frequency
- clock-output-names
- qcom,micbias1-microvolt
- qcom,micbias2-microvolt
- qcom,micbias3-microvolt
- qcom,micbias4-microvolt
- "#interrupt-cells"
- "#clock-cells"
- "#sound-dai-cells"
- "#address-cells"
- "#size-cells"
examples:
- |
codec@1,0{
compatible = "slim217,250";
reg = <1 0>;
reset-gpios = <&tlmm 64 0>;
slim-ifc-dev = <&wcd9340_ifd>;
#sound-dai-cells = <1>;
interrupt-parent = <&tlmm>;
interrupts = <54 4>;
interrupt-controller;
#interrupt-cells = <1>;
#clock-cells = <0>;
clock-frequency = <9600000>;
clock-output-names = "mclk";
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
clock-names = "extclk";
clocks = <&rpmhcc 2>;
#address-cells = <1>;
#size-cells = <1>;
gpio@42 {
compatible = "qcom,wcd9340-gpio";
reg = <0x42 0x2>;
gpio-controller;
#gpio-cells = <2>;
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment