Commit a6cd0d2d authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

Documentation: net-sysfs: Remove duplicate PHY device documentation

Both sysfs-bus-mdio and sysfs-class-net-phydev contain the same
duplication information. There is not currently any MDIO bus specific
attribute, but there are PHY device (struct phy_device) specific
attributes. Use the more precise description from sysfs-bus-mdio and
carry that over to sysfs-class-net-phydev.

Fixes: 86f22d04 ("net: sysfs: Document PHY device sysfs attributes")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8fb44d60
What: /sys/bus/mdio_bus/devices/.../phy_id
Date: November 2012
KernelVersion: 3.8
Contact: netdev@vger.kernel.org
Description:
This attribute contains the 32-bit PHY Identifier as reported
by the device during bus enumeration, encoded in hexadecimal.
This ID is used to match the device with the appropriate
driver.
What: /sys/bus/mdio_bus/devices/.../phy_interface
Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
This attribute contains the PHY interface as configured by the
Ethernet driver during bus enumeration, encoded in string.
This interface mode is used to configure the Ethernet MAC with the
appropriate mode for its data lines to the PHY hardware.
What: /sys/bus/mdio_bus/devices/.../phy_has_fixups
Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
This attribute contains the boolean value whether a given PHY
device has had any "fixup" workaround running on it, encoded as
a boolean. This information is provided to help troubleshooting
PHY configurations.
...@@ -11,24 +11,31 @@ Date: February 2014 ...@@ -11,24 +11,31 @@ Date: February 2014
KernelVersion: 3.15 KernelVersion: 3.15
Contact: netdev@vger.kernel.org Contact: netdev@vger.kernel.org
Description: Description:
Boolean value indicating whether the PHY device has This attribute contains the boolean value whether a given PHY
any fixups registered against it (phy_register_fixup) device has had any "fixup" workaround running on it, encoded as
a boolean. This information is provided to help troubleshooting
PHY configurations.
What: /sys/class/mdio_bus/<bus>/<device>/phy_id What: /sys/class/mdio_bus/<bus>/<device>/phy_id
Date: November 2012 Date: November 2012
KernelVersion: 3.8 KernelVersion: 3.8
Contact: netdev@vger.kernel.org Contact: netdev@vger.kernel.org
Description: Description:
32-bit hexadecimal value corresponding to the PHY device's OUI, This attribute contains the 32-bit PHY Identifier as reported
model and revision number. by the device during bus enumeration, encoded in hexadecimal.
This ID is used to match the device with the appropriate
driver.
What: /sys/class/mdio_bus/<bus>/<device>/phy_interface What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
Date: February 2014 Date: February 2014
KernelVersion: 3.15 KernelVersion: 3.15
Contact: netdev@vger.kernel.org Contact: netdev@vger.kernel.org
Description: Description:
String value indicating the PHY interface, possible This attribute contains the PHY interface as configured by the
values are:. Ethernet driver during bus enumeration, encoded in string.
This interface mode is used to configure the Ethernet MAC with the
appropriate mode for its data lines to the PHY hardware.
Possible values are:
<empty> (not available), mii, gmii, sgmii, tbi, rev-mii, <empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui, xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment