rtc: pcf85063: Fix reading alarm

If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80

Fix this by masking alarm enabling and reserved bits.

Fixes: 05cb3a56 ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220921074141.3903104-1-alexander.stein@ew.tq-group.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

drivers/rtc/rtc-pcf85063.c

@@ -169,10 +169,10 @@ static int pcf85063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	if (ret)
 		return ret;
 
-	alrm->time.tm_sec = bcd2bin(buf[0]);
-	alrm->time.tm_min = bcd2bin(buf[1]);
-	alrm->time.tm_hour = bcd2bin(buf[2]);
-	alrm->time.tm_mday = bcd2bin(buf[3]);
+	alrm->time.tm_sec = bcd2bin(buf[0] & 0x7f);
+	alrm->time.tm_min = bcd2bin(buf[1] & 0x7f);
+	alrm->time.tm_hour = bcd2bin(buf[2] & 0x3f);
+	alrm->time.tm_mday = bcd2bin(buf[3] & 0x3f);
 
 	ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val);
 	if (ret)