arm64: dts: imx93: Fix the dmas entries order

Per fsl-lpuart.yaml, the dmas and dma-names entries should be
'rx' followed by 'tx'.

Change the order to fix the following schema warning:

imx93-11x11-evk.dtb: serial@44380000: dma-names:0: 'rx' was expected
	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
imx93-11x11-evk.dtb: serial@44380000: dma-names:1: 'tx' was expected
	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -336,8 +336,8 @@ lpuart1: serial@44380000 {
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 16 0 0>, <&edma1 17 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -347,8 +347,8 @@ lpuart2: serial@44390000 {
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 18 0 0>, <&edma1 19 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -669,8 +669,8 @@ lpuart3: serial@42570000 {
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 17 0 0>, <&edma2 18 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -680,8 +680,8 @@ lpuart4: serial@42580000 {
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 19 0 0>, <&edma2 20 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -691,8 +691,8 @@ lpuart5: serial@42590000 {
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 21 0 0>, <&edma2 22 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -702,8 +702,8 @@ lpuart6: serial@425a0000 {
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 23 0 0>, <&edma2 24 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -742,8 +742,8 @@ lpuart7: serial@42690000 {
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 87 0 0>, <&edma2 88 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -753,8 +753,8 @@ lpuart8: serial@426a0000 {
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 89 0 0>, <&edma2 90 0 1>;
-				dma-names = "tx", "rx";
+				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};