Commit a728f560 authored by Vitaly Wool's avatar Vitaly Wool Committed by Mark Brown

ASoC: make clock direction configurable in asoc-simple

Some CPU drivers (e. g. davinci-mcasp) may require the system clock to
be configured as OUT, while there's no good way currently to set
SND_SOC_CLK_OUT in simple-soc driver if the clock is fixed-rate.

This patch makes asoc_simple_card_init_dai() initialize clock to
SND_SOCK_CLK_OUT if explicitly stated in the relevant dts file. This
change is transparent and doesn't change the default behavior.
Signed-off-by: default avatarVitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 0995fb7c
......@@ -86,6 +86,9 @@ Optional CPU/CODEC subnodes properties:
in dai startup() and disabled with
clk_disable_unprepare() in dai
shutdown().
- system-clock-direction-out : specifies clock direction as 'out' on
initialization. It is useful for some aCPUs with
fixed clocks.
Example 1 - single DAI link:
......
......@@ -15,6 +15,7 @@
struct asoc_simple_dai {
const char *name;
unsigned int sysclk;
int clk_direction;
int slots;
int slot_width;
unsigned int tx_slot_mask;
......
......@@ -196,7 +196,11 @@ int asoc_simple_card_parse_clk(struct device *dev,
simple_dai->sysclk = clk_get_rate(clk);
}
dev_dbg(dev, "%s : sysclk = %d\n", name, simple_dai->sysclk);
if (of_property_read_bool(node, "system-clock-direction-out"))
simple_dai->clk_direction = SND_SOC_CLOCK_OUT;
dev_dbg(dev, "%s : sysclk = %d, direction %d\n", name,
simple_dai->sysclk, simple_dai->clk_direction);
return 0;
}
......@@ -310,7 +314,8 @@ int asoc_simple_card_init_dai(struct snd_soc_dai *dai,
int ret;
if (simple_dai->sysclk) {
ret = snd_soc_dai_set_sysclk(dai, 0, simple_dai->sysclk, 0);
ret = snd_soc_dai_set_sysclk(dai, 0, simple_dai->sysclk,
simple_dai->clk_direction);
if (ret && ret != -ENOTSUPP) {
dev_err(dai->dev, "simple-card: set_sysclk error\n");
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment