usb: dwc3: update stream id in depcmd

For stream capable endpoints, stream id related information
needs to be updated into DEPCMD while issuing START TRANSFER.
This patch does the same.
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc3/gadget.c

@@ -1235,6 +1235,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
 		params.param1 = lower_32_bits(req->trb_dma);
 		cmd = DWC3_DEPCMD_STARTTRANSFER;
 
+		if (dep->stream_capable)
+			cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id);
+
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
 			cmd |= DWC3_DEPCMD_PARAM(dep->frame_number);
 	} else {