serial: sh-sci: Fix register offsets for the IRDA serial port

Even though most of its registers are 8-bit wide, the IRDA has two
16-bit registers that make it a 16-bit peripheral and not a 8-bit
peripheral with addresses shifted by one. Fix the registers offset in
the driver and the platform data regshift value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/sh/kernel/cpu/sh3/setup-sh770x.c

@@ -157,7 +157,6 @@ static struct platform_device scif1_device = {
 static struct plat_sci_port scif2_platform_data = {
 	.type		= PORT_IRDA,
 	.ops		= &sh770x_sci_port_ops,
-	.regshift	= 1,
 };
 
 static struct resource scif2_resources[] = {

drivers/tty/serial/sh-sci.c

@@ -193,18 +193,17 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 	},
 
 	/*
-	 * Common definitions for legacy IrDA ports, dependent on
-	 * regshift value.
+	 * Common definitions for legacy IrDA ports.
 	 */
 	[SCIx_IRDA_REGTYPE] = {
 		[SCSMR]		= { 0x00,  8 },
-		[SCBRR]		= { 0x01,  8 },
-		[SCSCR]		= { 0x02,  8 },
-		[SCxTDR]	= { 0x03,  8 },
-		[SCxSR]		= { 0x04,  8 },
-		[SCxRDR]	= { 0x05,  8 },
-		[SCFCR]		= { 0x06,  8 },
-		[SCFDR]		= { 0x07, 16 },
+		[SCBRR]		= { 0x02,  8 },
+		[SCSCR]		= { 0x04,  8 },
+		[SCxTDR]	= { 0x06,  8 },
+		[SCxSR]		= { 0x08, 16 },
+		[SCxRDR]	= { 0x0a,  8 },
+		[SCFCR]		= { 0x0c,  8 },
+		[SCFDR]		= { 0x0e, 16 },
 		[SCTFDR]	= sci_reg_invalid,
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,