Merge kroah.com:/home/greg/linux/BK/bleed-2.6

into kroah.com:/home/greg/linux/BK/i2c-2.6

drivers/i2c/busses/Kconfig

@@ -118,8 +118,14 @@ config I2C_I810
 	  will be called i2c-i810.
 
 config I2C_IBM_IIC
-	tristate "IBM IIC I2C"
+	tristate "IBM PPC 4xx on-chip I2C interface"
 	depends on IBM_OCP && I2C
+	help
+	  Say Y here if you want to use IIC peripheral found on 
+	  embedded IBM PPC 4xx based systems. 
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ibm_iic.
 
 config I2C_IOP3XX
 	tristate "Intel XScale IOP3xx on-chip I2C interface"

drivers/i2c/busses/i2c-ibm_iic.c

@@ -3,7 +3,7 @@
  *
  * Support for the IIC peripheral on IBM PPC 4xx
  *
- * Copyright (c) 2003 Zultys Technologies.
+ * Copyright (c) 2003, 2004 Zultys Technologies.
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
  * Based on original work by 
@@ -45,7 +45,7 @@
 
 #include "i2c-ibm_iic.h"
 
-#define DRIVER_VERSION "2.0"
+#define DRIVER_VERSION "2.01"
 
 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
 MODULE_LICENSE("GPL");
@@ -69,14 +69,14 @@ MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
 #endif
 
 #if DBG_LEVEL > 0
-#  define DBG(x...)	printk(KERN_DEBUG "ibm-iic" ##x)
+#  define DBG(f,x...)	printk(KERN_DEBUG "ibm-iic" f, ##x)
 #else
-#  define DBG(x...)	((void)0)
+#  define DBG(f,x...)	((void)0)
 #endif
 #if DBG_LEVEL > 1
-#  define DBG2(x...) 	DBG( ##x )
+#  define DBG2(f,x...) 	DBG(f, ##x)
 #else
-#  define DBG2(x...) 	((void)0)
+#  define DBG2(f,x...) 	((void)0)
 #endif
 #if DBG_LEVEL > 2
 static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
@@ -455,6 +455,16 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	}		
 	for (i = 0; i < num; ++i){
 		if (unlikely(msgs[i].len <= 0)){
+			if (num == 1 && !msgs[0].len){
+				/* Special case for I2C_SMBUS_QUICK emulation.
+				 * Although this logic is FAR FROM PERFECT, this 
+				 * is what previous driver version did.
+				 * IBM IIC doesn't support 0-length transactions
+				 * (except bit-banging through IICx_DIRECTCNTL).
+				 */
+				DBG("%d: zero-length msg kludge\n", dev->idx); 
+				return 0;
+			}
 			DBG("%d: invalid len %d in msg[%d]\n", dev->idx, 
 				msgs[i].len, i);
 			return -EINVAL;
@@ -549,19 +559,24 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 
 	struct ibm_iic_private* dev;
 	struct i2c_adapter* adap;
+	struct ocp_func_iic_data* iic_data = ocp->def->additions;
 	int ret;
-	bd_t* bd = (bd_t*)&__res;
 	
+	if (!iic_data)
+		printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
+			ocp->def->index);
+
 	if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
-		printk(KERN_CRIT "ibm-iic: failed to allocate device data\n");
+		printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
+			ocp->def->index);
 		return -ENOMEM;
 	}
 
 	memset(dev, 0, sizeof(*dev));
-	dev->idx = ocp->num;
+	dev->idx = ocp->def->index;
 	ocp_set_drvdata(ocp, dev);
 	
-	if (!(dev->vaddr = ioremap(ocp->paddr, sizeof(struct iic_regs)))){
+	if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
 		printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
 			dev->idx);
 		ret = -ENXIO;
@@ -570,7 +585,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 	
 	init_waitqueue_head(&dev->wq);
 
-	dev->irq = iic_force_poll ? -1 : ocp->irq;
+	dev->irq = iic_force_poll ? -1 : ocp->def->irq;
 	if (dev->irq >= 0){
 		/* Disable interrupts until we finish intialization,
 		   assumes level-sensitive IRQ setup...
@@ -589,13 +604,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 			dev->idx);
 		
 	/* Board specific settings */
-	BUG_ON(dev->idx >= sizeof(bd->bi_iic_fast) / sizeof(bd->bi_iic_fast[0]));
-	dev->fast_mode = iic_force_fast ? 1 : bd->bi_iic_fast[dev->idx];
+	dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
 	
 	/* clckdiv is the same for *all* IIC interfaces, 
 	 * but I'd rather make a copy than introduce another global. --ebs
 	 */
-	dev->clckdiv = iic_clckdiv(bd->bi_opb_busfreq);
+	dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
 	DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
 	
 	/* Initialize IIC interface */
@@ -664,7 +678,7 @@ static void __devexit iic_remove(struct ocp_device *ocp)
 
 static struct ocp_device_id ibm_iic_ids[] __devinitdata = 
 {
-	{ .vendor = OCP_VENDOR_IBM, .device = OCP_FUNC_IIC },
+	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
 	{ .vendor = OCP_VENDOR_INVALID }
 };
 
@@ -672,7 +686,7 @@ MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
 
 static struct ocp_driver ibm_iic_driver =
 {
-	.name 		= "ocp_iic",
+	.name 		= "iic",
 	.id_table	= ibm_iic_ids,
 	.probe		= iic_probe,
 	.remove		= __devexit_p(iic_remove),
@@ -685,7 +699,7 @@ static struct ocp_driver ibm_iic_driver =
 static int __init iic_init(void)
 {
 	printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
-	return ocp_module_init(&ibm_iic_driver);
+	return ocp_register_driver(&ibm_iic_driver);
 }
 
 static void __exit iic_exit(void)

drivers/i2c/busses/i2c-parport.h

@@ -67,13 +67,18 @@ static struct adapter_parm adapter_parm[] = {
 		.getsda	= { 0x40, STAT, 1 },
 		.getscl	= { 0x08, STAT, 1 },
 	},
-	/* type 4: ADM1025 and ADM1032 evaluation boards */
+	/* type 4: ADM1032 evaluation board */
+	{
+		.setsda	= { 0x02, DATA, 1 },
+		.setscl	= { 0x01, DATA, 1 },
+		.getsda	= { 0x10, STAT, 1 },
+		.init	= { 0xf0, DATA, 0 },
+	},
+	/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
 	{
 		.setsda	= { 0x02, DATA, 1 },
 		.setscl	= { 0x01, DATA, 1 },
 		.getsda	= { 0x10, STAT, 1 },
-		.init	= { 0xf0, DATA, 0 }, /* ADM1025 doesn't need this,
-						but it doesn't hurt */
 	},
 };
 
@@ -85,4 +90,5 @@ MODULE_PARM_DESC(type,
 	" 1 = home brew teletext adapter\n"
 	" 2 = Velleman K8000 adapter\n"
 	" 3 = ELV adapter\n"
-	" 4 = ADM1025 and ADM1032 evaluation boards\n");
+	" 4 = ADM1032 evaluation board\n"
+	" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n");

drivers/i2c/chips/Kconfig

@@ -145,6 +145,16 @@ config SENSORS_LM90
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
 
+config SENSORS_MAX1619
+	tristate "Maxim MAX1619 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for MAX1619 sensor chip.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called max1619.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
 obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
 obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
+obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o

drivers/i2c/chips/eeprom.c

@@ -203,11 +203,12 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &eeprom_driver;
 	new_client->flags = 0;
 
+	/* prevent 24RF08 corruption */
+	i2c_smbus_write_quick(new_client, 0);
+
 	/* Now, we do the remaining detection. It is not there, unless you force
 	   the checksum to work out. */
 	if (checksum) {
-		/* prevent 24RF08 corruption */
-		i2c_smbus_write_quick(new_client, 0);
 		cs = 0;
 		for (i = 0; i <= 0x3e; i++)
 			cs += i2c_smbus_read_byte_data(new_client, i);

drivers/i2c/i2c-core.c

@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/idr.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
 
@@ -35,6 +36,7 @@
 static LIST_HEAD(adapters);
 static LIST_HEAD(drivers);
 static DECLARE_MUTEX(core_lists);
+static DEFINE_IDR(i2c_adapter_idr);
 
 int i2c_device_probe(struct device *dev)
 {
@@ -113,13 +115,19 @@ static struct device_attribute dev_attr_client_name = {
  */
 int i2c_add_adapter(struct i2c_adapter *adap)
 {
-	static int nr = 0;
+	int id, res = 0;
 	struct list_head   *item;
 	struct i2c_driver  *driver;
 
 	down(&core_lists);
 
-	adap->nr = nr++;
+	if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) {
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	id = idr_get_new(&i2c_adapter_idr, NULL);
+	adap->nr =  id & MAX_ID_MASK;
 	init_MUTEX(&adap->bus_lock);
 	init_MUTEX(&adap->clist_lock);
 	list_add_tail(&adap->list,&adapters);
@@ -151,10 +159,12 @@ int i2c_add_adapter(struct i2c_adapter *adap)
 			/* We ignore the return code; if it fails, too bad */
 			driver->attach_adapter(adap);
 	}
-	up(&core_lists);
 
 	dev_dbg(&adap->dev, "registered as adapter #%d\n", adap->nr);
-	return 0;
+
+ out_unlock:
+	up(&core_lists);
+	return res;
 }
 
 
@@ -208,6 +218,9 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	wait_for_completion(&adap->dev_released);
 	wait_for_completion(&adap->class_dev_released);
 
+	/* free dynamically allocated bus id */
+	idr_remove(&i2c_adapter_idr, adap->nr);
+
 	dev_dbg(&adap->dev, "adapter unregistered\n");
 
  out_unlock: