Merge branches 'acpi-misc', 'acpi-tools' and 'acpi-docs'

Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:

 - Drop references to non-functional 01.org/linux-acpi web site from
   MAINTAINERS and Kconfig help texts (Rafael Wysocki).

 - Replace strlcpy() with unused retval with strscpy() in the ACPI
   support code (Wolfram Sang).

 - Do not initialize ret in main() in the pfrut utility (Shi junming).

 - Drop useless ACPI DSDT override documentation (Rafael Wysocki).

 - Fix a few typos and wording mistakes in the ACPI device enumeration
   documentation (Jean Delvare).

* acpi-misc:
  MAINTAINERS: Drop records pointing to 01.org/linux-acpi
  ACPI: Kconfig: Drop link to https://01.org/linux-acpi
  ACPI: DPTF: Drop stale link from Kconfig help
  ACPI: move from strlcpy() with unused retval to strscpy()

* acpi-tools:
  ACPI: tools: pfrut: Do not initialize ret in main()

* acpi-docs:
  ACPI: docs: Drop useless DSDT override documentation
  ACPI: docs: enumeration: Fix a few typos and wording mistakes

Documentation/admin-guide/acpi/dsdt-override.rst

-.. SPDX-License-Identifier: GPL-2.0
-
-===============
-Overriding DSDT
-===============
-
-Linux supports a method of overriding the BIOS DSDT:
-
-CONFIG_ACPI_CUSTOM_DSDT - builds the image into the kernel.
-
-When to use this method is described in detail on the
-Linux/ACPI home page:
-https://01.org/linux-acpi/documentation/overriding-dsdt

Documentation/firmware-guide/acpi/enumeration.rst

@@ -21,7 +21,7 @@ possible we decided to do following:
   - Devices behind real busses where there is a connector resource
     are represented as struct spi_device or struct i2c_device. Note
     that standard UARTs are not busses so there is no struct uart_device,
-    although some of them may be represented by sturct serdev_device.
+    although some of them may be represented by struct serdev_device.
 
 As both ACPI and Device Tree represent a tree of devices (and their
 resources) this implementation follows the Device Tree way as much as
@@ -205,7 +205,7 @@ Here is what the ACPI namespace for a SPI slave might look like::
 		}
 		...
 
-The SPI device drivers only need to add ACPI IDs in a similar way than with
+The SPI device drivers only need to add ACPI IDs in a similar way to
 the platform device drivers. Below is an example where we add ACPI support
 to at25 SPI eeprom driver (this is meant for the above ACPI snippet)::
 
@@ -362,7 +362,7 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
 specifies the path to the controller. In order to use these GPIOs in Linux
 we need to translate them to the corresponding Linux GPIO descriptors.
 
-There is a standard GPIO API for that and is documented in
+There is a standard GPIO API for that and it is documented in
 Documentation/admin-guide/gpio/.
 
 In the above example we can get the corresponding two GPIO descriptors with
@@ -538,8 +538,8 @@ information.
 PCI hierarchy representation
 ============================
 
-Sometimes could be useful to enumerate a PCI device, knowing its position on the
-PCI bus.
+Sometimes it could be useful to enumerate a PCI device, knowing its position on
+the PCI bus.
 
 For example, some systems use PCI devices soldered directly on the mother board,
 in a fixed position (ethernet, Wi-Fi, serial ports, etc.). In this conditions it
@@ -550,7 +550,7 @@ To identify a PCI device, a complete hierarchical description is required, from
 the chipset root port to the final device, through all the intermediate
 bridges/switches of the board.
 
-For example, let us assume to have a system with a PCIe serial port, an
+For example, let's assume we have a system with a PCIe serial port, an
 Exar XR17V3521, soldered on the main board. This UART chip also includes
 16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
 In this case, the ``lspci`` output for this component is::
@@ -593,8 +593,8 @@ of the chipset bridge (also called "root port") with address::
 
 	Bus: 0 - Device: 14 - Function: 1
 
-To find this information is necessary disassemble the BIOS ACPI tables, in
-particular the DSDT (see also [2])::
+To find this information, it is necessary to disassemble the BIOS ACPI tables,
+in particular the DSDT (see also [2])::
 
 	mkdir ~/tables/
 	cd ~/tables/

MAINTAINERS

@@ -348,7 +348,6 @@ M:	"Rafael J. Wysocki" <rafael@kernel.org>
 R:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
-W:	https://01.org/linux-acpi
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 B:	https://bugzilla.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
@@ -427,7 +426,6 @@ M:	Rafael J. Wysocki <rafael@kernel.org>
 R:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
-W:	https://01.org/linux-acpi
 B:	https://bugzilla.kernel.org
 F:	drivers/acpi/*thermal*
 
@@ -10378,7 +10376,6 @@ INTEL MENLOW THERMAL DRIVER
 M:	Sujith Thomas <sujith.thomas@intel.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
-W:	https://01.org/linux-acpi
 F:	drivers/thermal/intel/intel_menlow.c
 
 INTEL P-Unit IPC DRIVER

drivers/acpi/Kconfig

@@ -27,9 +27,6 @@ menuconfig ACPI
 	  Management (APM) specification.  If both ACPI and APM support 
 	  are configured, ACPI is used.
 
-	  The project home page for the Linux ACPI subsystem is here:
-	  <https://01.org/linux-acpi>
-
 	  Linux support for ACPI is based on Intel Corporation's ACPI
 	  Component Architecture (ACPI CA).  For more information on the
 	  ACPI CA, see:
@@ -347,7 +344,6 @@ config ACPI_CUSTOM_DSDT_FILE
 	depends on !STANDALONE
 	help
 	  This option supports a custom DSDT by linking it into the kernel.
-	  See Documentation/admin-guide/acpi/dsdt-override.rst
 
 	  Enter the full path name to the file which includes the AmlCode
 	  or dsdt_aml_code declaration.

drivers/acpi/bus.c

@@ -802,7 +802,7 @@ static bool acpi_of_modalias(struct acpi_device *adev,
 
 	str = obj->string.pointer;
 	chr = strchr(str, ',');
-	strlcpy(modalias, chr ? chr + 1 : str, len);
+	strscpy(modalias, chr ? chr + 1 : str, len);
 
 	return true;
 }
@@ -822,7 +822,7 @@ void acpi_set_modalias(struct acpi_device *adev, const char *default_id,
 		       char *modalias, size_t len)
 {
 	if (!acpi_of_modalias(adev, modalias, len))
-		strlcpy(modalias, default_id, len);
+		strscpy(modalias, default_id, len);
 }
 EXPORT_SYMBOL_GPL(acpi_set_modalias);
 

drivers/acpi/dptf/Kconfig

@@ -11,9 +11,6 @@ menuconfig ACPI_DPTF
 	  a coordinated approach for different policies to effect the hardware
 	  state of a system.
 
-	  For more information see:
-	  <https://01.org/intel%C2%AE-dynamic-platform-and-thermal-framework-dptf-chromium-os/overview>
-
 if ACPI_DPTF
 
 config DPTF_POWER

drivers/acpi/processor_idle.c

@@ -787,7 +787,7 @@ static int acpi_processor_setup_cstates(struct acpi_processor *pr)
 
 		state = &drv->states[count];
 		snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
-		strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
+		strscpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
 		state->exit_latency = cx->latency;
 		state->target_residency = cx->latency * latency_factor;
 		state->enter = acpi_idle_enter;
@@ -956,7 +956,7 @@ static int acpi_processor_evaluate_lpi(acpi_handle handle,
 
 		obj = pkg_elem + 9;
 		if (obj->type == ACPI_TYPE_STRING)
-			strlcpy(lpi_state->desc, obj->string.pointer,
+			strscpy(lpi_state->desc, obj->string.pointer,
 				ACPI_CX_DESC_LEN);
 
 		lpi_state->index = state_idx;
@@ -1022,7 +1022,7 @@ static bool combine_lpi_states(struct acpi_lpi_state *local,
 	result->arch_flags = parent->arch_flags;
 	result->index = parent->index;
 
-	strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
+	strscpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
 	strlcat(result->desc, "+", ACPI_CX_DESC_LEN);
 	strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN);
 	return true;
@@ -1196,7 +1196,7 @@ static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
 
 		state = &drv->states[i];
 		snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
-		strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
+		strscpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
 		state->exit_latency = lpi->wake_latency;
 		state->target_residency = lpi->min_residency;
 		if (lpi->arch_flags)

drivers/acpi/utils.c

@@ -878,7 +878,7 @@ bool acpi_dev_present(const char *hid, const char *uid, s64 hrv)
 	struct acpi_dev_match_info match = {};
 	struct device *dev;
 
-	strlcpy(match.hid[0].id, hid, sizeof(match.hid[0].id));
+	strscpy(match.hid[0].id, hid, sizeof(match.hid[0].id));
 	match.uid = uid;
 	match.hrv = hrv;
 
@@ -911,7 +911,7 @@ acpi_dev_get_next_match_dev(struct acpi_device *adev, const char *hid, const cha
 	struct acpi_dev_match_info match = {};
 	struct device *dev;
 
-	strlcpy(match.hid[0].id, hid, sizeof(match.hid[0].id));
+	strscpy(match.hid[0].id, hid, sizeof(match.hid[0].id));
 	match.uid = uid;
 	match.hrv = hrv;
 
@@ -961,7 +961,7 @@ EXPORT_SYMBOL(acpi_video_backlight_string);
 
 static int __init acpi_backlight(char *str)
 {
-	strlcpy(acpi_video_backlight_string, str,
+	strscpy(acpi_video_backlight_string, str,
 		sizeof(acpi_video_backlight_string));
 	return 1;
 }

tools/power/acpi/tools/pfrut/pfrut.c

@@ -190,7 +190,7 @@ int main(int argc, char *argv[])
 	void *addr_map_capsule;
 	struct stat st;
 	char *log_buf;
-	int ret = 0;
+	int ret;
 
 	if (getuid() != 0) {
 		printf("Please run the tool as root - Exiting.\n");