Commit a8015ded authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: mscc: ocelot: properly account for VLAN header length when setting MRU

What the driver writes into MAC_MAXLEN_CFG does not actually represent
VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are
numerically equal, but the difference is important, as the switch treats
VLAN-tagged traffic specially and knows to increase the maximum accepted
frame size automatically. So it is always wrong to account for VLAN in
the MAC_MAXLEN_CFG register.

Unconditionally increase the maximum allowed frame size for
double-tagged traffic. Accounting for the additional length does not
mean that the other VLAN membership checks aren't performed, so there's
no harm done.

Also, stop abusing the MTU name for configuring the MRU. There is no
support for configuring the MRU on an interface at the moment.

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Fixes: fa914e9c ("net: mscc: ocelot: create a helper for changing the port MTU")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent afe207d8
......@@ -2176,24 +2176,29 @@ static int ocelot_init_timestamp(struct ocelot *ocelot)
return 0;
}
static void ocelot_port_set_mtu(struct ocelot *ocelot, int port, size_t mtu)
/* Configure the maximum SDU (L2 payload) on RX to the value specified in @sdu.
* The length of VLAN tags is accounted for automatically via DEV_MAC_TAGS_CFG.
*/
static void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
int maxlen = sdu + ETH_HLEN + ETH_FCS_LEN;
int atop_wm;
ocelot_port_writel(ocelot_port, mtu, DEV_MAC_MAXLEN_CFG);
ocelot_port_writel(ocelot_port, maxlen, DEV_MAC_MAXLEN_CFG);
/* Set Pause WM hysteresis
* 152 = 6 * mtu / OCELOT_BUFFER_CELL_SZ
* 101 = 4 * mtu / OCELOT_BUFFER_CELL_SZ
* 152 = 6 * maxlen / OCELOT_BUFFER_CELL_SZ
* 101 = 4 * maxlen / OCELOT_BUFFER_CELL_SZ
*/
ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA |
SYS_PAUSE_CFG_PAUSE_STOP(101) |
SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port);
/* Tail dropping watermark */
atop_wm = (ocelot->shared_queue_sz - 9 * mtu) / OCELOT_BUFFER_CELL_SZ;
ocelot_write_rix(ocelot, ocelot_wm_enc(9 * mtu),
atop_wm = (ocelot->shared_queue_sz - 9 * maxlen) /
OCELOT_BUFFER_CELL_SZ;
ocelot_write_rix(ocelot, ocelot_wm_enc(9 * maxlen),
SYS_ATOP, port);
ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG);
}
......@@ -2222,9 +2227,10 @@ void ocelot_init_port(struct ocelot *ocelot, int port)
DEV_MAC_HDX_CFG);
/* Set Max Length and maximum tags allowed */
ocelot_port_set_mtu(ocelot, port, VLAN_ETH_FRAME_LEN);
ocelot_port_set_maxlen(ocelot, port, ETH_DATA_LEN);
ocelot_port_writel(ocelot_port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) |
DEV_MAC_TAGS_CFG_VLAN_AWR_ENA |
DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA |
DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA,
DEV_MAC_TAGS_CFG);
......@@ -2310,18 +2316,18 @@ void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu,
* Only one port can be an NPI at the same time.
*/
if (cpu < ocelot->num_phys_ports) {
int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN;
int sdu = ETH_DATA_LEN + OCELOT_TAG_LEN;
ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M |
QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu),
QSYS_EXT_CPU_CFG);
if (injection == OCELOT_TAG_PREFIX_SHORT)
mtu += OCELOT_SHORT_PREFIX_LEN;
sdu += OCELOT_SHORT_PREFIX_LEN;
else if (injection == OCELOT_TAG_PREFIX_LONG)
mtu += OCELOT_LONG_PREFIX_LEN;
sdu += OCELOT_LONG_PREFIX_LEN;
ocelot_port_set_mtu(ocelot, cpu, mtu);
ocelot_port_set_maxlen(ocelot, cpu, sdu);
}
/* CPU port Injection/Extraction configuration */
......
......@@ -74,7 +74,7 @@
#define DEV_MAC_TAGS_CFG_TAG_ID_M GENMASK(31, 16)
#define DEV_MAC_TAGS_CFG_TAG_ID_X(x) (((x) & GENMASK(31, 16)) >> 16)
#define DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA BIT(2)
#define DEV_MAC_TAGS_CFG_PB_ENA BIT(1)
#define DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA BIT(1)
#define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA BIT(0)
#define DEV_MAC_ADV_CHK_CFG 0x2c
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment