Commit a83860c2 authored by Ralf Baechle's avatar Ralf Baechle

MIPS: Mark Eins: Fix configuration.

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 3b289d6e
......@@ -238,8 +238,12 @@ config MIPS_SIM
This option enables support for MIPS Technologies MIPSsim software
emulator.
config MACH_EMMA
bool "NEC EMMA series based machines"
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
select HW_HAS_PCI
help
This enables support for the NEC Electronics Mark-eins boards.
config MACH_VR41XX
bool "NEC VR4100 series based machines"
......@@ -637,7 +641,6 @@ endchoice
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
......@@ -895,6 +898,18 @@ config MIPS_RM9122
bool
select SERIAL_RM9000
config SOC_EMMA2RH
bool
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select SWAP_IO_SPACE
select SYS_HAS_CPU_R5500
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
config SOC_PNX833X
bool
select CEVT_R4K
......@@ -930,11 +945,6 @@ config SOC_PNX8550
config SWAP_IO_SPACE
bool
config EMMA2RH
bool
depends on MARKEINS
default y
config SERIAL_RM9000
bool
......
......@@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000
#
# Common NEC EMMAXXX
#
core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/
core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/
cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
#
......
......@@ -35,7 +35,7 @@ CONFIG_ZONE_DMA=y
# CONFIG_PNX8550_STB810 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
CONFIG_MARKEINS=y
CONFIG_NEC_MARKEINS=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
......@@ -68,7 +68,7 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_EMMA2RH=y
CONFIG_SOC_EMMA2RH=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
......@@ -574,9 +574,9 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x1e000000
CONFIG_MTD_PHYSMAP_LEN=0x02000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PLATRAM is not set
#
......
choice
prompt "Machine type"
depends on MACH_EMMA
default NEC_MARKEINS
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
select HW_HAS_PCI
help
This enables support for the NEC Electronics Mark-eins boards.
endchoice
config SOC_EMMA2RH
bool
select SOC_EMMA
select SYS_HAS_CPU_R5500
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
config SOC_EMMA
bool
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select SWAP_IO_SPACE
select SYS_SUPPORTS_BIG_ENDIAN
......@@ -141,13 +141,6 @@ static struct platform_device serial_emma = {
},
};
static struct platform_device *devices[] = {
&i2c_emma_devices[0],
&i2c_emma_devices[1],
&i2c_emma_devices[2],
&serial_emma,
};
static struct mtd_partition markeins_parts[] = {
[0] = {
.name = "RootFS",
......@@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = {
},
};
static struct physmap_flash_data markeins_flash_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(markeins_parts),
.parts = markeins_parts
};
static struct resource markeins_flash_resource = {
.start = 0x1e000000,
.end = 0x02000000,
.flags = IORESOURCE_MEM
};
static struct platform_device markeins_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &markeins_flash_data,
},
.num_resources = 1,
.resource = &markeins_flash_resource,
};
static struct platform_device *devices[] = {
i2c_emma_devices,
i2c_emma_devices + 1,
i2c_emma_devices + 2,
&serial_emma,
&markeins_flash_device,
};
static int __init platform_devices_setup(void)
{
physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
arch_initcall(platform_devices_setup);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment