Commit a853205e authored by Philipp Zabel's avatar Philipp Zabel Committed by Thierry Reding

drm/panel: simple: Add HannStar HSD070PWW1 7.0" WXGA TFT LCD panel

This patch adds support for the HannStar Display Corp. HSD070PWW1 7.0"
WXGA TFT LCD panel to the simple-panel driver. The binding documentation
is included.
This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 160 clocks, and the vertical blanking interval is 23 lines.
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 92905925
HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
Required properties:
- compatible: should be "hannstar,hsd070pww1"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
......@@ -535,6 +535,29 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = {
},
};
static const struct drm_display_mode hannstar_hsd070pww1_mode = {
.clock = 71100,
.hdisplay = 1280,
.hsync_start = 1280 + 1,
.hsync_end = 1280 + 1 + 158,
.htotal = 1280 + 1 + 158 + 1,
.vdisplay = 800,
.vsync_start = 800 + 1,
.vsync_end = 800 + 1 + 21,
.vtotal = 800 + 1 + 21 + 1,
.vrefresh = 60,
};
static const struct panel_desc hannstar_hsd070pww1 = {
.modes = &hannstar_hsd070pww1_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 151,
.height = 94,
},
};
static const struct drm_display_mode innolux_n116bge_mode = {
.clock = 71000,
.hdisplay = 1366,
......@@ -659,6 +682,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "foxlink,fl500wvr00-a0t",
.data = &foxlink_fl500wvr00_a0t,
}, {
.compatible = "hannstar,hsd070pww1",
.data = &hannstar_hsd070pww1,
}, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment