Commit a88394cf authored by Jeff Kirsher's avatar Jeff Kirsher

ewrk3/tulip: Move the DEC - Tulip drivers

Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/
and make the necessary Kconfig and Makefile changes.

The Digital Equioment (DEC) driver ewrk3 was moved into
drivers/net/ethernet/dec/ and the remaining drivers (Tulip)
were moved into drivers/net/ethernet/dec/tulip/

CC: Tobias Ringstrom <tori@unhappy.mine.nu>
CC: Grant Grundler <grundler@parisc-linux.org>
CC: David Davies <davies@maniac.ultranet.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: default avatarGrant Grundler <grundler@parisc-linux.org>
parent 5ff2241d
......@@ -2073,7 +2073,7 @@ DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
L: netdev@vger.kernel.org
S: Orphan
F: Documentation/networking/dmfe.txt
F: drivers/net/tulip/dmfe.c
F: drivers/net/ethernet/tulip/dmfe.c
DC390/AM53C974 SCSI driver
M: Kurt Garloff <garloff@suse.de>
......@@ -6514,7 +6514,7 @@ TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
F: drivers/net/ethernet/tulip/
TUN/TAP driver
M: Maxim Krasnyansky <maxk@qualcomm.com>
......
......@@ -452,8 +452,6 @@ config DNET
To compile this driver as a module, choose M here: the module
will be called dnet.
source "drivers/net/tulip/Kconfig"
config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)"
depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
......@@ -494,20 +492,6 @@ config NET_ISA
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
select CRC32
---help---
This driver supports the DE203, DE204 and DE205 network (Ethernet)
cards. If this is for you, say Y and read
<file:Documentation/networking/ewrk3.txt> in the kernel source as
well as the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ewrk3.
config ETH16I
tristate "ICL EtherTeam 16i/32 support"
depends on NET_ISA
......
......@@ -106,7 +106,6 @@ obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
......@@ -147,7 +146,6 @@ obj-$(CONFIG_USB_IPHETH) += usb/
obj-$(CONFIG_USB_CDC_PHONET) += usb/
obj-$(CONFIG_WLAN) += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
......
......@@ -19,6 +19,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
source "drivers/net/ethernet/dec/Kconfig"
source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
......
......@@ -11,6 +11,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
obj-$(CONFIG_NET_VENDOR_DEC) += dec/
obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
......
#
# Digital Equipment Inc network device configuration
#
config NET_VENDOR_DEC
bool "Digital Equipment devices"
depends on PCI || EISA || CARDBUS
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about DEC cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_DEC
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on ISA
select CRC32
---help---
This driver supports the DE203, DE204 and DE205 network (Ethernet)
cards. If this is for you, say Y and read
<file:Documentation/networking/ewrk3.txt> in the kernel source as
well as the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ewrk3.
source "drivers/net/ethernet/dec/tulip/Kconfig"
endif # NET_VENDOR_DEC
#
# Makefile for the Digital Equipment Inc. network device drivers.
#
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_NET_TULIP) += tulip/
......@@ -2,10 +2,10 @@
# Tulip family network device configuration
#
menuconfig NET_TULIP
bool "\"Tulip\" family network device support"
depends on PCI || EISA || CARDBUS
help
config NET_TULIP
bool "DEC - Tulip devices"
depends on (PCI || EISA || CARDBUS)
---help---
This selects the "Tulip" family of EISA/PCI network cards.
if NET_TULIP
......@@ -32,7 +32,7 @@ config DE2104X_DSL
depends on DE2104X
range 0 31
default 0
help
---help---
Setting this value allows to align ring buffer descriptors into their
own cache lines. Value of 4 corresponds to the typical 32 byte line
(the descriptor is 16 bytes). This is necessary on systems that lack
......@@ -59,7 +59,7 @@ config TULIP
config TULIP_MWI
bool "New bus configuration (EXPERIMENTAL)"
depends on TULIP && EXPERIMENTAL
help
---help---
This configures your Tulip card specifically for the card and
system cache line size type you are using.
......@@ -70,7 +70,7 @@ config TULIP_MWI
config TULIP_MMIO
bool "Use PCI shared mem for NIC registers"
depends on TULIP
help
---help---
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
......@@ -79,7 +79,7 @@ config TULIP_MMIO
config TULIP_NAPI
bool "Use RX polling (NAPI)"
depends on TULIP
help
---help---
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
......@@ -107,7 +107,7 @@ config TULIP_DM910X
config DE4X5
tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
depends on PCI || EISA
depends on (PCI || EISA)
select CRC32
---help---
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
......@@ -126,7 +126,7 @@ config WINBOND_840
depends on PCI
select CRC32
select MII
help
---help---
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment