Merge branch 'dsa-lan9303-Linting'

Egil Hjelmeland says:

====================
net: dsa: lan9303: Linting

This series is non-functional.
 - Correct some errors in comments and documentation.
Remove scripts/checkpatch.pl WARNINGs and most CHECKs:
 - Replace msleep(1) with usleep_range()
 - Adjust indenting

Changes v1 -> v2:
 - Removed patch 4 "Remove unnecessary parentheses", to be addressed later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/dsa/lan9303.txt

@@ -52,7 +52,7 @@ I2C managed mode:
 
 			port@1 { /* external port 1 */
 				reg = <1>;
-				label = "lan1;
+				label = "lan1";
 			};
 
 			port@2 { /* external port 2 */
@@ -89,7 +89,7 @@ MDIO managed mode:
 
 					port@1 { /* external port 1 */
 						reg = <1>;
-						label = "lan1;
+						label = "lan1";
 					};
 
 					port@2 { /* external port 2 */

drivers/net/dsa/lan9303-core.c

@@ -284,7 +284,7 @@ static int lan9303_indirect_phy_wait_for_completion(struct lan9303 *chip)
 		}
 		if (!(reg & LAN9303_PMI_ACCESS_MII_BUSY))
 			return 0;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 
 	return -EIO;
@@ -376,7 +376,7 @@ static int lan9303_switch_wait_for_completion(struct lan9303 *chip)
 		}
 		if (!(reg & LAN9303_SWITCH_CSR_CMD_BUSY))
 			return 0;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 
 	return -EIO;

drivers/net/dsa/lan9303_i2c.c

@@ -50,7 +50,7 @@ static int lan9303_i2c_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	sw_dev->chip.regmap = devm_regmap_init_i2c(client,
-						&lan9303_i2c_regmap_config);
+						   &lan9303_i2c_regmap_config);
 	if (IS_ERR(sw_dev->chip.regmap)) {
 		ret = PTR_ERR(sw_dev->chip.regmap);
 		dev_err(&client->dev, "Failed to allocate register map: %d\n",

drivers/net/dsa/lan9303_mdio.c

@@ -116,7 +116,7 @@ static int lan9303_mdio_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	sw_dev->chip.regmap = devm_regmap_init(&mdiodev->dev, NULL, sw_dev,
-						&lan9303_mdio_regmap_config);
+					       &lan9303_mdio_regmap_config);
 	if (IS_ERR(sw_dev->chip.regmap)) {
 		ret = PTR_ERR(sw_dev->chip.regmap);
 		dev_err(&mdiodev->dev, "regmap init failed: %d\n", ret);

include/linux/dsa/lan9303.h

@@ -13,8 +13,8 @@ struct lan9303_phy_ops {
 #define LAN9303_NUM_ALR_RECORDS 512
 struct lan9303_alr_cache_entry {
 	u8  mac_addr[ETH_ALEN];
-	u8  port_map;           /* Bitmap of ports. Zero if unused entry */
-	u8  stp_override;       /* non zero if set ALR_DAT1_AGE_OVERRID */
+	u8  port_map;         /* Bitmap of ports. Zero if unused entry */
+	u8  stp_override;     /* non zero if set LAN9303_ALR_DAT1_AGE_OVERRID */
 };
 
 struct lan9303 {
@@ -28,7 +28,9 @@ struct lan9303 {
 	struct mutex indirect_mutex; /* protect indexed register access */
 	const struct lan9303_phy_ops *ops;
 	bool is_bridged; /* true if port 1 and 2 are bridged */
-	u32 swe_port_state; /* remember SWE_PORT_STATE while not bridged */
+
+	/* remember LAN9303_SWE_PORT_STATE while not bridged */
+	u32 swe_port_state;
 	/* LAN9303 do not offer reading specific ALR entry. Cache all
 	 * static entries in a flat table
 	 **/

net/dsa/tag_lan9303.c

@@ -88,7 +88,7 @@ static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev)
 }
 
 static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev,
-			struct packet_type *pt)
+				   struct packet_type *pt)
 {
 	u16 *lan9303_tag;
 	unsigned int source_port;