Commit a8c8a367 authored by Eric W. Biederman's avatar Eric W. Biederman Committed by Linus Torvalds

[PATCH] x86_64 irq: Refactor setup_IO_APIC_irq

Currently we have two routines that do practically the same thing
setup_IO_APIC_irq and io_apic_set_pci_routing.  This patch makes
setup_IO_APIC_irq the common factor of these two previous routines.
For setup_IO_APIC_irq all that was needed was to pass the trigger
and polarity to make the code a proper subset of io_apic_set_pci_routing.

Hopefully consolidating these two routines will improve maintenance
there were several differences that simply appear to be one routine
or the other getting it wrong.
Signed-off-by: default avatarEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent a27bc06d
......@@ -615,22 +615,6 @@ static int pin_2_irq(int idx, int apic, int pin)
return irq;
}
static inline int IO_APIC_irq_trigger(int irq)
{
int apic, idx, pin;
for (apic = 0; apic < nr_ioapics; apic++) {
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
idx = find_irq_entry(apic,pin,mp_INT);
if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
return irq_trigger(idx);
}
}
/*
* nonexistent IRQs are edge default
*/
return 0;
}
/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = {
......@@ -795,26 +779,36 @@ void __setup_vector_irq(int cpu)
static struct irq_chip ioapic_chip;
#define IOAPIC_AUTO -1
#define IOAPIC_EDGE 0
#define IOAPIC_LEVEL 1
static void ioapic_register_intr(int irq, unsigned long trigger)
{
if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
trigger == IOAPIC_LEVEL)
if (trigger)
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_fasteoi_irq, "fasteoi");
else
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_edge_irq, "edge");
}
static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
int trigger, int polarity)
{
struct IO_APIC_route_entry entry;
cpumask_t mask;
int vector;
unsigned long flags;
if (!IO_APIC_IRQ(irq))
return;
vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
if (vector < 0)
return;
apic_printk(APIC_VERBOSE,KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n",
apic, mp_ioapics[apic].mpc_apicid, pin, vector,
irq, trigger, polarity);
/*
* add it to the IO-APIC irq-routing table:
......@@ -823,41 +817,27 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
entry.dest = cpu_mask_to_apicid(mask);
entry.mask = 0; /* enable IRQ */
entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
entry.trigger = irq_trigger(idx);
entry.polarity = irq_polarity(idx);
entry.trigger = trigger;
entry.polarity = polarity;
entry.vector = vector;
if (irq_trigger(idx)) {
entry.trigger = 1;
/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
*/
if (trigger)
entry.mask = 1;
entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
}
if (!apic && !IO_APIC_IRQ(irq))
return;
if (IO_APIC_IRQ(irq)) {
cpumask_t mask;
vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
if (vector < 0)
return;
entry.dest = cpu_mask_to_apicid(mask);
entry.vector = vector;
ioapic_register_intr(irq, IOAPIC_AUTO);
if (!apic && (irq < 16))
disable_8259A_irq(irq);
}
ioapic_register_intr(irq, trigger);
if (irq < 16)
disable_8259A_irq(irq);
ioapic_write_entry(apic, pin, entry);
spin_lock_irqsave(&ioapic_lock, flags);
irq_desc[irq].affinity = TARGET_CPUS;
spin_unlock_irqrestore(&ioapic_lock, flags);
}
static void __init setup_IO_APIC_irqs(void)
......@@ -882,8 +862,8 @@ static void __init setup_IO_APIC_irqs(void)
irq = pin_2_irq(idx, apic, pin);
add_pin_to_irq(irq, apic, pin);
setup_IO_APIC_irq(apic, pin, idx, irq);
setup_IO_APIC_irq(apic, pin, irq,
irq_trigger(idx), irq_polarity(idx));
}
}
......@@ -2090,11 +2070,6 @@ int __init io_apic_get_redir_entries (int ioapic)
int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
int vector;
cpumask_t mask;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
......@@ -2107,42 +2082,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p
if (irq >= 16)
add_pin_to_irq(irq, ioapic, pin);
vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
if (vector < 0)
return vector;
/*
* Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
* Note that we mask (disable) IRQs now -- these get enabled when the
* corresponding device driver registers for this IRQ.
*/
memset(&entry,0,sizeof(entry));
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
entry.dest = cpu_mask_to_apicid(mask);
entry.trigger = triggering;
entry.polarity = polarity;
entry.mask = 1; /* Disabled (masked) */
entry.vector = vector & 0xff;
apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n", ioapic,
mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
triggering, polarity);
ioapic_register_intr(irq, triggering);
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
ioapic_write_entry(ioapic, pin, entry);
spin_lock_irqsave(&ioapic_lock, flags);
irq_desc[irq].affinity = TARGET_CPUS;
spin_unlock_irqrestore(&ioapic_lock, flags);
setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
return 0;
}
......@@ -2175,7 +2115,9 @@ void __init setup_ioapic_dest(void)
* cpu is online.
*/
if(!irq_vector[irq])
setup_IO_APIC_irq(ioapic, pin, irq_entry, irq);
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
else
set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment