imx: define functions to configure chip selects in the WEIM

This has the addional effect that the macros CSCR_U, CSCR_L and CSCR_A
are not used anymore in mach-pcm038.c and mach-qong.c.  These still use
the deprecated IO_ADDRESS macro and shouldn't be used in new code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>

arch/arm/mach-mx2/mach-pcm038.c

@@ -173,9 +173,7 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	__raw_writel(0x0000d843, CSCR_U(1));
-	__raw_writel(0x22252521, CSCR_L(1));
-	__raw_writel(0x22220a00, CSCR_A(1));
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
 static struct imxi2c_platform_data pcm038_i2c_1_data = {

arch/arm/mach-mx3/mach-qong.c

@@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	__raw_writel(0x00004f00, CSCR_U(3));
-	__raw_writel(0x20013b31, CSCR_L(3));
-	__raw_writel(0x00020800, CSCR_A(3));
+	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */

arch/arm/plat-mxc/include/mach/mx27.h

@@ -24,6 +24,10 @@
 #ifndef __MACH_MX27_H__
 #define __MACH_MX27_H__
 
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 #define MX27_AIPI_BASE_ADDR		0x10000000
 #define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
 #define MX27_AIPI_SIZE			SZ_1M
@@ -109,6 +113,11 @@
 #define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
 #define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs)	(MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
 
 /* IRAM */
@@ -119,6 +128,16 @@
 	IMX_IO_ADDRESS(x, MX27_SAHB1) ?:				\
 	IMX_IO_ADDRESS(x, MX27_X_MEMC))
 
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2		1
 #define MX27_INT_GPT6		2

arch/arm/plat-mxc/include/mach/mx31.h

 #ifndef __MACH_MX31_H__
 #define __MACH_MX31_H__
 
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 /*
  * IRAM
  */
@@ -110,6 +114,11 @@
 #define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
 #define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
 
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs)	(MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 #define MX31_IO_ADDRESS(x) (						\
@@ -119,6 +128,16 @@
 	IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:				\
 	IMX_IO_ADDRESS(x, MX31_SPBA0))
 
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5

arch/arm/plat-mxc/include/mach/mxc.h

@@ -121,6 +121,7 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))