Commit a922f1a9 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A relatively large set of fixes here, the biggest part of it is for
  fallout from the GPIO descriptor rework that affected several of the
  devices with usable native chip select support. There's also some new
  PCI IDs for Intel Jasper Lake devices.

  The conversion to platform_get_irq() in the fsl driver is an
  incremental fix for build errors introduced on SPARC by the earlier
  fix for error handling in probe in that driver"

* tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl: use platform_get_irq() instead of of_irq_to_resource()
  spi: nxp-fspi: Ensure width is respected in spi-mem operations
  spi: spi-ti-qspi: Fix a bug when accessing non default CS
  spi: fsl: don't map irq during probe
  spi: spi-cavium-thunderx: Add missing pci_release_regions()
  spi: sprd: Fix the incorrect SPI register
  gpiolib: of: Make of_gpio_spi_cs_get_count static
  spi: fsl: Handle the single hardwired chipselect case
  gpio: Handle counting of Freescale chipselects
  spi: fsl: Fix GPIO descriptor support
  spi: dw: Correct handling of native chipselect
  spi: cadence: Correct handling of native chipselect
  spi: pxa2xx: Add support for Intel Jasper Lake
parents 9065e063 63aa6a69
......@@ -23,6 +23,29 @@
#include "gpiolib.h"
#include "gpiolib-of.h"
/**
* of_gpio_spi_cs_get_count() - special GPIO counting for SPI
* Some elder GPIO controllers need special quirks. Currently we handle
* the Freescale GPIO controller with bindings that doesn't use the
* established "cs-gpios" for chip selects but instead rely on
* "gpios" for the chip select lines. If we detect this, we redirect
* the counting of "cs-gpios" to count "gpios" transparent to the
* driver.
*/
static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
{
struct device_node *np = dev->of_node;
if (!IS_ENABLED(CONFIG_SPI_MASTER))
return 0;
if (!con_id || strcmp(con_id, "cs"))
return 0;
if (!of_device_is_compatible(np, "fsl,spi") &&
!of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
return 0;
return of_gpio_named_count(np, "gpios");
}
/*
* This is used by external users of of_gpio_count() from <linux/of_gpio.h>
*
......@@ -35,6 +58,10 @@ int of_gpio_get_count(struct device *dev, const char *con_id)
char propname[32];
unsigned int i;
ret = of_gpio_spi_cs_get_count(dev, con_id);
if (ret > 0)
return ret;
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
if (con_id)
snprintf(propname, sizeof(propname), "%s-%s",
......
......@@ -168,16 +168,16 @@ static void cdns_spi_init_hw(struct cdns_spi *xspi)
/**
* cdns_spi_chipselect - Select or deselect the chip select line
* @spi: Pointer to the spi_device structure
* @enable: Select (1) or deselect (0) the chip select line
* @is_high: Select(0) or deselect (1) the chip select line
*/
static void cdns_spi_chipselect(struct spi_device *spi, bool enable)
static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
{
struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
u32 ctrl_reg;
ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
if (!enable) {
if (is_high) {
/* Deselect the slave */
ctrl_reg |= CDNS_SPI_CR_SSCTRL;
} else {
......
......@@ -82,6 +82,7 @@ static int thunderx_spi_probe(struct pci_dev *pdev,
error:
clk_disable_unprepare(p->clk);
pci_release_regions(pdev);
spi_master_put(master);
return ret;
}
......@@ -96,6 +97,7 @@ static void thunderx_spi_remove(struct pci_dev *pdev)
return;
clk_disable_unprepare(p->clk);
pci_release_regions(pdev);
/* Put everything in a known state. */
writeq(0, p->register_base + OCTEON_SPI_CFG(p));
}
......
......@@ -129,10 +129,11 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
struct chip_data *chip = spi_get_ctldata(spi);
/* Chip select logic is inverted from spi_set_cs() */
if (chip && chip->cs_control)
chip->cs_control(enable);
chip->cs_control(!enable);
if (enable)
if (!enable)
dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
else if (dws->cs_override)
dw_writel(dws, DW_SPI_SER, 0);
......
......@@ -611,6 +611,7 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
master->setup = fsl_spi_setup;
master->cleanup = fsl_spi_cleanup;
master->transfer_one_message = fsl_spi_do_one_msg;
master->use_gpio_descriptors = true;
mpc8xxx_spi = spi_master_get_devdata(master);
mpc8xxx_spi->max_bits_per_word = 32;
......@@ -727,17 +728,27 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
}
}
#endif
pdata->cs_control = fsl_spi_cs_control;
/*
* Handle the case where we have one hardwired (always selected)
* device on the first "chipselect". Else we let the core code
* handle any GPIOs or native chip selects and assign the
* appropriate callback for dealing with the CS lines. This isn't
* supported on the GRLIB variant.
*/
ret = gpiod_count(dev, "cs");
if (ret <= 0)
pdata->max_chipselect = 1;
else
pdata->cs_control = fsl_spi_cs_control;
}
ret = of_address_to_resource(np, 0, &mem);
if (ret)
goto err;
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
ret = -EINVAL;
irq = platform_get_irq(ofdev, 0);
if (irq < 0) {
ret = irq;
goto err;
}
......@@ -750,7 +761,6 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
return 0;
err:
irq_dispose_mapping(irq);
return ret;
}
......
......@@ -439,7 +439,7 @@ static bool nxp_fspi_supports_op(struct spi_mem *mem,
op->data.nbytes > f->devtype_data->txfifo)
return false;
return true;
return spi_mem_default_supports_op(mem, op);
}
/* Instead of busy looping invoke readl_poll_timeout functionality. */
......
......@@ -1443,6 +1443,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
{ PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
/* JSL */
{ PCI_VDEVICE(INTEL, 0x4daa), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x4dab), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x4dfb), LPSS_CNL_SSP },
/* APL */
{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
......
......@@ -678,7 +678,7 @@ static int sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
if (d->unit != SPI_DELAY_UNIT_SCK)
return -EINVAL;
val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
val = readl_relaxed(ss->base + SPRD_SPI_CTL0);
val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX);
/* Set default chip selection, clock phase and clock polarity */
val |= ss->hw_mode & SPI_CPHA ? SPRD_SPI_NG_RX : SPRD_SPI_NG_TX;
......
......@@ -62,6 +62,7 @@ struct ti_qspi {
u32 dc;
bool mmap_enabled;
int current_cs;
};
#define QSPI_PID (0x0)
......@@ -487,6 +488,7 @@ static void ti_qspi_enable_memory_map(struct spi_device *spi)
MEM_CS_EN(spi->chip_select));
}
qspi->mmap_enabled = true;
qspi->current_cs = spi->chip_select;
}
static void ti_qspi_disable_memory_map(struct spi_device *spi)
......@@ -498,6 +500,7 @@ static void ti_qspi_disable_memory_map(struct spi_device *spi)
regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
MEM_CS_MASK, 0);
qspi->mmap_enabled = false;
qspi->current_cs = -1;
}
static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
......@@ -543,7 +546,7 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
mutex_lock(&qspi->list_lock);
if (!qspi->mmap_enabled)
if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
ti_qspi_enable_memory_map(mem->spi);
ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
op->addr.nbytes, op->dummy.nbytes);
......@@ -799,6 +802,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
}
}
qspi->mmap_enabled = false;
qspi->current_cs = -1;
ret = devm_spi_register_master(&pdev->dev, master);
if (!ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment