Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cleanups from Thomas Gleixner:
 "A set of small x86 cleanups:

   - Remove unused headers in the IDT code

   - Kconfig indendation and comment fixes

   - Fix all 'the the' typos in one go instead of waiting for bots to
     fix one at a time"

* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix all occurences of the "the the" typo
  x86/idt: Remove unused headers
  x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
  x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig

arch/x86/Kconfig

@@ -41,11 +41,11 @@ config FORCE_DYNAMIC_FTRACE
 	depends on FUNCTION_TRACER
 	select DYNAMIC_FTRACE
 	help
-	 We keep the static function tracing (!DYNAMIC_FTRACE) around
-	 in order to test the non static function tracing in the
-	 generic code, as other architectures still use it. But we
-	 only need to keep it around for x86_64. No need to keep it
-	 for x86_32. For x86_32, force DYNAMIC_FTRACE. 
+	  We keep the static function tracing (!DYNAMIC_FTRACE) around
+	  in order to test the non static function tracing in the
+	  generic code, as other architectures still use it. But we
+	  only need to keep it around for x86_64. No need to keep it
+	  for x86_32. For x86_32, force DYNAMIC_FTRACE.
 #
 # Arch settings
 #
@@ -394,9 +394,9 @@ config CC_HAS_SANE_STACKPROTECTOR
 	default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC)) if 64BIT
 	default $(success,$(srctree)/scripts/gcc-x86_32-has-stack-protector.sh $(CC))
 	help
-	   We have to make sure stack protector is unconditionally disabled if
-	   the compiler produces broken code or if it does not let us control
-	   the segment on 32-bit kernels.
+	  We have to make sure stack protector is unconditionally disabled if
+	  the compiler produces broken code or if it does not let us control
+	  the segment on 32-bit kernels.
 
 menu "Processor type and features"
 
@@ -532,7 +532,7 @@ config X86_EXTENDED_PLATFORM
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
-endif
+endif # X86_32
 
 if X86_64
 config X86_EXTENDED_PLATFORM
@@ -551,7 +551,7 @@ config X86_EXTENDED_PLATFORM
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
-endif
+endif # X86_64
 # This is an alphabetically sorted list of 64 bit extended platforms
 # Please maintain the alphabetic order if and when there are additions
 config X86_NUMACHIP
@@ -599,9 +599,9 @@ config X86_GOLDFISH
 	bool "Goldfish (Virtual Platform)"
 	depends on X86_EXTENDED_PLATFORM
 	help
-	 Enable support for the Goldfish virtual platform used primarily
-	 for Android development. Unless you are building for the Android
-	 Goldfish emulator say N here.
+	  Enable support for the Goldfish virtual platform used primarily
+	  for Android development. Unless you are building for the Android
+	  Goldfish emulator say N here.
 
 config X86_INTEL_CE
 	bool "CE4100 TV platform"
@@ -900,7 +900,7 @@ config INTEL_TDX_GUEST
 	  memory contents and CPU state. TDX guests are protected from
 	  some attacks from the VMM.
 
-endif #HYPERVISOR_GUEST
+endif # HYPERVISOR_GUEST
 
 source "arch/x86/Kconfig.cpu"
 
@@ -1167,16 +1167,16 @@ config X86_MCE_INTEL
 	prompt "Intel MCE features"
 	depends on X86_MCE && X86_LOCAL_APIC
 	help
-	   Additional support for intel specific MCE features such as
-	   the thermal monitor.
+	  Additional support for intel specific MCE features such as
+	  the thermal monitor.
 
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
 	depends on X86_MCE && X86_LOCAL_APIC && AMD_NB
 	help
-	   Additional support for AMD specific MCE features such as
-	   the DRAM Error Threshold.
+	  Additional support for AMD specific MCE features such as
+	  the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
 	bool "Support for old Pentium 5 / WinChip machine checks"
@@ -1254,18 +1254,18 @@ config X86_VSYSCALL_EMULATION
 	default y
 	depends on X86_64
 	help
-	 This enables emulation of the legacy vsyscall page.  Disabling
-	 it is roughly equivalent to booting with vsyscall=none, except
-	 that it will also disable the helpful warning if a program
-	 tries to use a vsyscall.  With this option set to N, offending
-	 programs will just segfault, citing addresses of the form
-	 0xffffffffff600?00.
+	  This enables emulation of the legacy vsyscall page.  Disabling
+	  it is roughly equivalent to booting with vsyscall=none, except
+	  that it will also disable the helpful warning if a program
+	  tries to use a vsyscall.  With this option set to N, offending
+	  programs will just segfault, citing addresses of the form
+	  0xffffffffff600?00.
 
-	 This option is required by many programs built before 2013, and
-	 care should be used even with newer programs if set to N.
+	  This option is required by many programs built before 2013, and
+	  care should be used even with newer programs if set to N.
 
-	 Disabling this option saves about 7K of kernel size and
-	 possibly 4K of additional runtime pagetable memory.
+	  Disabling this option saves about 7K of kernel size and
+	  possibly 4K of additional runtime pagetable memory.
 
 config X86_IOPL_IOPERM
 	bool "IOPERM and IOPL Emulation"
@@ -2002,15 +2002,15 @@ config EFI_MIXED
 	bool "EFI mixed-mode support"
 	depends on EFI_STUB && X86_64
 	help
-	   Enabling this feature allows a 64-bit kernel to be booted
-	   on a 32-bit firmware, provided that your CPU supports 64-bit
-	   mode.
+	  Enabling this feature allows a 64-bit kernel to be booted
+	  on a 32-bit firmware, provided that your CPU supports 64-bit
+	  mode.
 
-	   Note that it is not possible to boot a mixed-mode enabled
-	   kernel via the EFI boot stub - a bootloader that supports
-	   the EFI handover protocol must be used.
+	  Note that it is not possible to boot a mixed-mode enabled
+	  kernel via the EFI boot stub - a bootloader that supports
+	  the EFI handover protocol must be used.
 
-	   If unsure, say N.
+	  If unsure, say N.
 
 source "kernel/Kconfig.hz"
 
@@ -2235,16 +2235,16 @@ config RANDOMIZE_MEMORY
 	select DYNAMIC_MEMORY_LAYOUT
 	default RANDOMIZE_BASE
 	help
-	   Randomizes the base virtual address of kernel memory sections
-	   (physical memory mapping, vmalloc & vmemmap). This security feature
-	   makes exploits relying on predictable memory locations less reliable.
+	  Randomizes the base virtual address of kernel memory sections
+	  (physical memory mapping, vmalloc & vmemmap). This security feature
+	  makes exploits relying on predictable memory locations less reliable.
 
-	   The order of allocations remains unchanged. Entropy is generated in
-	   the same way as RANDOMIZE_BASE. Current implementation in the optimal
-	   configuration have in average 30,000 different possible virtual
-	   addresses for each memory section.
+	  The order of allocations remains unchanged. Entropy is generated in
+	  the same way as RANDOMIZE_BASE. Current implementation in the optimal
+	  configuration have in average 30,000 different possible virtual
+	  addresses for each memory section.
 
-	   If unsure, say Y.
+	  If unsure, say Y.
 
 config RANDOMIZE_MEMORY_PHYSICAL_PADDING
 	hex "Physical memory mapping padding" if EXPERT
@@ -2254,12 +2254,12 @@ config RANDOMIZE_MEMORY_PHYSICAL_PADDING
 	range 0x1 0x40 if MEMORY_HOTPLUG
 	range 0x0 0x40
 	help
-	   Define the padding in terabytes added to the existing physical
-	   memory size during kernel memory randomization. It is useful
-	   for memory hotplug support but reduces the entropy available for
-	   address randomization.
+	  Define the padding in terabytes added to the existing physical
+	  memory size during kernel memory randomization. It is useful
+	  for memory hotplug support but reduces the entropy available for
+	  address randomization.
 
-	   If unsure, leave at the default value.
+	  If unsure, leave at the default value.
 
 config HOTPLUG_CPU
 	def_bool y
@@ -2606,7 +2606,6 @@ source "drivers/idle/Kconfig"
 
 endmenu
 
-
 menu "Bus options (PCI etc.)"
 
 choice
@@ -2830,7 +2829,6 @@ config AMD_NB
 
 endmenu
 
-
 menu "Binary Emulations"
 
 config IA32_EMULATION
@@ -2868,14 +2866,12 @@ config COMPAT
 	def_bool y
 	depends on IA32_EMULATION || X86_X32_ABI
 
-if COMPAT
 config COMPAT_FOR_U64_ALIGNMENT
 	def_bool y
-endif
+	depends on COMPAT
 
 endmenu
 
-
 config HAVE_ATOMIC_IOMAP
 	def_bool y
 	depends on X86_32

arch/x86/Kconfig.debug

@@ -73,20 +73,19 @@ config DEBUG_TLBFLUSH
 	bool "Set upper limit of TLB entries to flush one-by-one"
 	depends on DEBUG_KERNEL
 	help
+	  X86-only for now.
 
-	X86-only for now.
+	  This option allows the user to tune the amount of TLB entries the
+	  kernel flushes one-by-one instead of doing a full TLB flush. In
+	  certain situations, the former is cheaper. This is controlled by the
+	  tlb_flushall_shift knob under /sys/kernel/debug/x86. If you set it
+	  to -1, the code flushes the whole TLB unconditionally. Otherwise,
+	  for positive values of it, the kernel will use single TLB entry
+	  invalidating instructions according to the following formula:
 
-	This option allows the user to tune the amount of TLB entries the
-	kernel flushes one-by-one instead of doing a full TLB flush. In
-	certain situations, the former is cheaper. This is controlled by the
-	tlb_flushall_shift knob under /sys/kernel/debug/x86. If you set it
-	to -1, the code flushes the whole TLB unconditionally. Otherwise,
-	for positive values of it, the kernel will use single TLB entry
-	invalidating instructions according to the following formula:
+	  flush_entries <= active_tlb_entries / 2^tlb_flushall_shift
 
-	flush_entries <= active_tlb_entries / 2^tlb_flushall_shift
-
-	If in doubt, say "N".
+	  If in doubt, say "N".
 
 config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
@@ -119,10 +118,10 @@ config X86_DECODER_SELFTEST
 	depends on DEBUG_KERNEL && INSTRUCTION_DECODER
 	depends on !COMPILE_TEST
 	help
-	 Perform x86 instruction decoder selftests at build time.
-	 This option is useful for checking the sanity of x86 instruction
-	 decoder code.
-	 If unsure, say "N".
+	  Perform x86 instruction decoder selftests at build time.
+	  This option is useful for checking the sanity of x86 instruction
+	  decoder code.
+	  If unsure, say "N".
 
 choice
 	prompt "IO delay type"

arch/x86/kvm/vmx/vmx.c

@@ -6219,7 +6219,7 @@ static noinstr void vmx_l1d_flush(struct kvm_vcpu *vcpu)
 	int size = PAGE_SIZE << L1D_CACHE_ORDER;
 
 	/*
-	 * This code is only executed when the the flush mode is 'cond' or
+	 * This code is only executed when the flush mode is 'cond' or
 	 * 'always'
 	 */
 	if (static_branch_likely(&vmx_l1d_flush_cond)) {

arch/x86/kvm/x86.c

@@ -11937,7 +11937,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	if (current->mm == kvm->mm) {
 		/*
 		 * Free memory regions allocated on behalf of userspace,
-		 * unless the the memory map has changed due to process exit
+		 * unless the memory map has changed due to process exit
 		 * or fd copying.
 		 */
 		mutex_lock(&kvm->slots_lock);

arch/x86/platform/efi/efi_thunk_64.S

@@ -8,7 +8,7 @@
  * The below thunking functions are only used after ExitBootServices()
  * has been called. This simplifies things considerably as compared with
  * the early EFI thunking because we can leave all the kernel state
- * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * intact (GDT, IDT, etc) and simply invoke the 32-bit EFI runtime
  * services from __KERNEL32_CS. This means we can continue to service
  * interrupts across an EFI mixed mode call.
  *